A wood fence gate lock with a code can make it easier to share access without handing out keys, but the right style depends on your gate. Some options are designed specifically for wood or vinyl gates, while others use a full keypad-and-handle setup and require specific door thicknesses or drilling. Below, we compare five mechanical choices and explain what to check before you buy.
| Product | Lock style | Notable feature | Best fit |
|---|---|---|---|
| Yardlock Gate Lock with Code | Gate-mounted code lock and latch | Designed for wood or vinyl gates; works with inward- or outward-swinging gates | Traditional backyard gates |
| VEVOR Mechanical Keyless Entry Door Lock | Mechanical keypad with handle and latch | Adjustable handle and included screws in two lengths | Gates or doors that fit its stated thickness range |
| Miosugo Keyless Gate Lock | Mechanical keypad with manual deadbolt | Set a custom 4–6 digit code | Gates needing manual lock control |
| Qivine Mechanical Keyless Door Lock | Mechanical push-button keypad lock | Listed for outdoor and commercial-style uses | Wrought-iron, courtyard, or passage doors |
| Tefola Mechanical Keyless Door Lock | Mechanical keypad lock with manual locking | Passage mode for temporary unrestricted access | Gates or doors where access modes are useful |
Table of Contents
Our Picks: Best Wood Fence Gate Lock With Code reviews
1. Yardlock Gate Lock with Code: Best Match for a Wood Fence Gate
The Yardlock is the most directly targeted option here for a wood fence gate. It combines a code-entry lock box on one side with a latch mechanism on the other. Entering the code lifts the latch through a connecting wire, while someone inside the yard can lift the latch without entering the code.
Its stated compatibility includes wood and vinyl gates, and it can be installed on gates that swing into or out of the yard. The lock uses no batteries or electronics, and the product description lists a die-cast box, latch, and hardware. A covered latch is intended to prevent someone from reaching over the fence to release it.
Installation calls for measuring and drilling, so plan on doing more than attaching a simple surface latch. You’ll need a tape measure, electric drill, Phillips bit, and wood drill bit. Check the installation guide and your gate’s layout before drilling; a gate that is warped, unusually thick, or poorly aligned may need adjustment to latch smoothly.
Compared with the other picks, this is the one built around a fence-gate latch rather than a door-style lockset. That makes it a sensible starting point for a typical wood or vinyl yard gate. Its compact stated size—2½ inches wide by 3½ inches high—may also suit installations where a larger handle-and-keypad assembly would look out of place.
Pros:
- Specifically listed for wood and vinyl gates
- Works with gates that swing into or out of the yard
- Mechanical operation requires no batteries or electronics
- Includes installation hardware and a covered latch design
Cons:
- Installation requires drilling and careful alignment
- Its latch-and-wire setup differs from a standard door handle, so check the instructions before purchasing
Verdict: Choose the Yardlock if you want a gate-specific code lock for a wood or vinyl fence and are comfortable measuring and drilling during installation.
2. VEVOR Mechanical Keyless Entry Lock: Adjustable Handle for Multiple Door Types
VEVOR takes a door-lock approach, combining a mechanical keypad with a handle and surface-mounted latch. Its full mechanical design needs no batteries, and the handle can be adjusted for left- or right-opening doors. The package includes screws in two lengths and a large padding plate, which may help cover the mounting area.
The stated fit range is 1.4 to 2.5 inches thick. The product is listed for courtyards, gardens, garages, storage rooms, and some iron or aluminum doors, as well as fence doors. Before ordering for a wood gate, measure the gate thickness and check that the lock’s through-hole layout works with its construction.
Installation is more involved than the Yardlock’s gate-specific latch arrangement. VEVOR notes that an additional hole is needed and that the front and rear panels need through holes. That makes this a better fit for a gate with enough solid material for the lock body and handle, rather than a narrow frame or a board with limited mounting space.
This pick stands out if you want a handle as part of the entry setup and your gate matches the stated dimensions. Its broader application list is useful, but it does not remove the need to confirm measurements and drilling requirements. Unlike the Yardlock, it is not described as a dedicated fence latch with a wire connecting the code box to the latch.
Pros:
- Mechanical keypad operation needs no batteries
- Adjustable handle supports left- or right-opening doors
- Stated fit range covers door thicknesses from 1.4 to 2.5 inches
- Includes two screw lengths and a large padding plate
Cons:
- Requires an additional hole and through holes for the panels
- Fit and installation depend on the gate’s thickness and structure
Verdict: Consider VEVOR if your gate can accept a door-style handle lock, falls within its thickness range, and has room for the required holes.
3. Miosugo Keyless Gate Lock: Manual Deadbolt and Custom Code
The Miosugo is a mechanical keypad lock with a manual deadbolt. The product description says you set a custom 4–6 digit code and change it from the back plate with a flathead screwdriver. It runs without batteries and uses manual locking and unlocking, giving you direct control over when the gate is secured.
It is listed for doors and gates from 1⅜ to 2⅜ inches thick, with a handle that can work on either the left or right. The stated uses include garden gates, garages, storage rooms, and wrought-iron or aluminum doors. The listing says it is not for glass doors. For a wood fence gate, verify that the gate thickness and mounting surface are suitable before buying.
The manual deadbolt is a useful distinction from a latch that might engage automatically: the product description says manual operation helps avoid accidentally locking yourself out. That may suit a busy household or a gate used often. On the other hand, you need to remember to lock it when security is needed. Its zinc-alloy construction is described as water- and rust-resistant, but the available information does not provide a specific weather rating.
Compared with the Yardlock, Miosugo has a door-style handle and deadbolt rather than a fence-specific latch-and-wire mechanism. It may suit a gate designed for a through-mounted lockset, but it is not necessarily a direct replacement for a simple fence latch. Confirm the installation details and the gate’s construction before choosing it.
Pros:
- Set a custom 4–6 digit code
- Manual deadbolt operation gives you control over locking
- Listed for both left- and right-opening doors
- Stated fit range is 1⅜ to 2⅜ inches thick
Cons:
- Requires a gate compatible with a door-style lock and handle
- Manual locking means you must secure the deadbolt yourself
Verdict: Pick Miosugo if you want a mechanical code lock with a manually operated deadbolt and your gate fits the listed thickness range.
4. Qivine Mechanical Keypad Lock: Simple Push-Button Access
Qivine is a mechanical push-button lock intended for outdoor doors and gates. Its zinc-alloy construction is described as rust-resistant, and the lock does not need batteries or a wired power supply. The product is listed for uses such as wrought-iron doors, courtyard doors, passage doors, warehouses, offices, and other outdoor entry points.
The listing describes a keypad with 1–11 digits, but it does not give a door-thickness range in the supplied product details. That makes fit an important open question for a wood fence gate. Before ordering, check the complete installation information and confirm the required thickness, hole pattern, and mounting surface against your gate.
As a door-style keypad lock, Qivine may be appealing if you want a button-based mechanical setup rather than an electronic lock. It is less clearly tailored to wood fence gates than the Yardlock, and less specific about dimensions than VEVOR, Miosugo, and Tefola. For a gate exposed to rain, also distinguish the listing’s rust-resistant material claim from a stated waterproof rating, which is not provided here.
This option may make sense when the installation details match your gate and you prefer a straightforward push-button design. It is harder to recommend as a first choice for a typical wood fence gate because the available specifications leave key fit questions unanswered.
Pros:
- Mechanical operation requires no batteries or wiring
- Push-button keypad design avoids carrying a key
- Listed for several outdoor and commercial-style applications
- Zinc-alloy body is described as rust-resistant
Cons:
- The supplied details do not state a door-thickness range
- Gate-specific fit and drilling requirements should be confirmed before purchase
Verdict: Choose Qivine only after confirming its dimensions and installation pattern will work with your wood gate.
5. Tefola Mechanical Keyless Lock: Passage Mode for Temporary Open Access
Tefola is a mechanical keypad lock with manual locking and a passage mode. The product description says its code can be set to 4–7 digits. Passage mode allows temporary access without using the code, which can be useful while people are moving furniture or coming and going during a gathering. You can return it to secure mode afterward.
The stated fit range is 1⅜ to 2⅜ inches thick, and the handle adjusts for left- or right-opening doors. Tefola lists garden gates, garages, storage rooms, metal fences, parking gates, and other access points among its uses. Its zinc-alloy construction has a rust-resistant coating, though no specific weather rating is provided in the supplied details.
Passage mode is the main reason to consider this model over a basic keypad lock. It adds convenience during periods of frequent traffic, but it also means you need to switch back to secure mode when open access is no longer wanted. As with other handle-style locks, check that your wood gate has enough thickness and a suitable mounting area.
Compared with Miosugo, Tefola also offers manual operation but adds a named passage mode and gives a stated 4–7 digit code range. Compared with the Yardlock, it is a more door-like assembly and is not described as a dedicated fence latch. Its best fit is a gate that can accommodate a through-mounted handle lock and would benefit from temporary unrestricted access.
Pros:
- Passage mode supports temporary open access
- Mechanical design needs no batteries or wired power
- Fits a stated thickness range of 1⅜ to 2⅜ inches
- Adjustable handle works with left- or right-opening doors
Cons:
- You must manually switch back from passage mode when access should be restricted
- Its door-style installation may not suit a narrow or lightweight gate frame
Verdict: Tefola is a good option to consider if your gate fits its dimensions and you want passage mode for busy periods.
How to Choose a Wood Fence Gate Lock With Code
Match the lock style to your gate
Start by deciding whether you need a fence-gate latch or a door-style lock with a handle. The Yardlock is described as a gate lock for wood and vinyl, with a code box connected to a latch. The other options use keypad-and-handle or deadbolt-style designs. A door-style assembly can require more room and a different hole pattern, so do not assume that every lock marketed for outdoor gates will fit a basic wood gate.
Measure thickness and mounting space
Measure the gate where the lock will go, not just the edge or frame. VEVOR lists a fit range of 1.4–2.5 inches; Miosugo and Tefola list 1⅜–2⅜ inches. The supplied Qivine details do not provide a thickness range, so confirm it before buying. Also check whether the gate has enough flat, solid material for the lock body, handle, screws, and any required through holes.
Check the swing direction and latch alignment
A gate lock has to work with how the gate opens and where its latch meets the post. Yardlock states that it works with gates swinging into or out of the yard. VEVOR, Miosugo, and Tefola describe handles that can be adjusted for left- or right-opening doors. Check the instructions for your chosen model and make sure the gate closes firmly without dragging or leaving a gap that prevents the latch from engaging.
Choose the access method that suits your routine
Think about how people will use the gate each day. A mechanical lock avoids batteries and wiring, but you still need to enter a code or operate a manual latch or deadbolt. Tefola’s passage mode can allow temporary access without entering the code, while Miosugo describes a manually operated deadbolt. Decide whether you want the lock to stay secured by default or prefer a way to leave it open during busy periods.
Consider installation work before you order
Some locks are not simple latch replacements. Yardlock calls for measuring and drilling, while VEVOR notes that an additional hole and through holes for the panels are needed. Read the installation guide before making changes to the gate. If your gate is narrow, decorative, or made of thin boards, a large lock body may be difficult to mount securely.
Think about outdoor exposure and upkeep
Mechanical locks avoid battery changes, but outdoor exposure still matters. Several listings describe zinc alloy as rust-resistant or corrosion-resistant, and Yardlock describes its lock as waterproof and non-rusting. These descriptions are not all the same as a specific weather rating. Consider how much direct rain and moisture the lock will face, and keep the latch and gate aligned so the mechanism can move freely.
Frequently Asked Questions
What is the best type of code lock for a wood fence gate?
For a typical wood fence gate, a gate-specific latch design is often the simplest place to start. Yardlock is specifically listed for wood and vinyl gates. A door-style keypad lock may also work, but only if your gate matches its thickness, mounting, and drilling requirements.
Do these locks need batteries?
The five products described here use mechanical operation and are listed as not requiring batteries or wired power. That means you do not need to plan for battery replacement, though you should still follow each product’s instructions for setting and using the code.
Will a keypad door lock fit any wood gate?
No. The gate needs to match the lock’s thickness range and have enough suitable material for its mounting plate, holes, handle, and latch or bolt. Measure the intended installation area and check the product instructions before ordering.
Can these locks be installed on a gate that swings either way?
Yardlock states that it works with gates swinging into or out of the yard. VEVOR, Miosugo, and Tefola describe adjustable handles for left- or right-opening doors. Check the installation guide for the exact orientation requirements of the model you choose.
Is passage mode the same as unlocking the gate permanently?
Passage mode is described by Tefola as a way to allow temporary access without entering the code. It is not the same as leaving the lock in its secure mode. Follow the instructions to return the lock to secured operation when unrestricted access is no longer needed.
What should I do if the gate does not latch smoothly?
Check that the gate is aligned with the post and that the latch or bolt meets its strike area without pressure or dragging. Recheck the installation measurements and instructions. A sagging or warped gate may need adjustment before a new lock can operate properly.
Final Recommendation
For most shoppers focused on a wood fence gate, the Yardlock is the most direct match because it is specifically described for wood and vinyl gates and uses a gate-latch design. If you want a handle-style keypad lock instead, compare the gate’s thickness and mounting space with VEVOR, Miosugo, or Tefola before ordering. Choose Qivine only after confirming its fit details, since the supplied specifications do not state a thickness range.
