Product reviewBathroom & Showers

Best Non Slip Bath Stickers: Compare Top Picks for Safer Bathing

Updated 11 min read

Reader-supported: when you buy through links on our site, we may earn an affiliate commission at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases. Learn more.

Slippery tub and shower floors can make everyday bathing feel less steady. Non-slip bath stickers add textured grip to selected areas without covering the floor like a full bath mat. The options below range from clear strips to decorative shapes, so you can compare coverage, appearance, and installation details before choosing. Stickers are not a substitute for careful footing or supervision, and they work best when installed on a compatible, clean, dry surface.

Quick Comparison

ProductDesign and sizePiecesBest for
Secopad Clear Anti-Slip Shower StickersClear strips, 0.8 × 8 inches24 strips and scraperFlexible strip placement with a low-visibility look
Secopad Snowflake Non-Slip Bathtub StickersClear snowflake shapes, about 3.35 inches across24 stickers and scraperDecorative coverage across a larger area
Clear Bloom Anti-Slip Shower StickersClear hexagons, 3.25 × 3.25 inches24 stickers, scraper, and placement guideBroad coverage with a geometric look
Secopad Blue Shell Non-Slip Bathtub StickersBlue shell-shaped stickers, about 3.15 inches across12 stickers and scraperA smaller set with a decorative color accent
Secopad Submarine and Sea Life StickersSea-life designs, about 4.5 × 3.5 inches20 stickers and scraperColorful bath-time decor, including for children’s bathrooms

Our Picks: Best Non Slip Bath Stickers reviews

1. Secopad Clear Strips for Flexible, Low-Visibility Placement

This Secopad set uses 24 clear strips, each listed at 0.8 by 8 inches. The narrow format lets you place traction where it is most useful, such as along the standing area of a tub or shower. A silicone scraper is included to help press the stickers into place.

The raised texture is designed to increase friction while leaving space for water to move between the small protrusions. Clear strips are a practical choice if you want grip without adding a bold pattern. Compared with the round or hex-shaped options here, the strips offer more control over the layout but cover less width per individual piece.

For best adhesion, the product description recommends a smooth surface. Prepare the area carefully and follow the included directions; dust, soap film, or moisture can interfere with a peel-and-stick installation. The supplied information says the adhesive is intended to remove without residue, but it is still sensible to test a discreet spot first, especially on a delicate finish.

Pros:

  • Clear design is visually understated.
  • Narrow strips allow flexible placement.
  • Raised texture is designed to improve grip and let water flow between bumps.
  • Includes a scraper for installation.

Cons:

  • Strips may require careful spacing to create even coverage.
  • Best suited to smooth surfaces, so check compatibility before applying.

Verdict: Choose these if you want clear, customizable strips and are comfortable planning their placement across the tub or shower floor.

2. Secopad Snowflake Stickers for Decorative Clear Coverage

These clear stickers have a snowflake shape and measure about 3.35 inches across. The set includes 24 pieces and a silicone scraper. Their larger, individual shapes create a decorative layout, while the raised texture is intended to provide traction underfoot and allow water to pass between the textured areas.

The product description suggests that 24 stickers can cover at least two-thirds of a tub’s surface, though the amount of coverage will depend on the tub’s dimensions and how closely you place them. Unlike long strips, the snowflake shapes can be arranged in a pattern or spaced across key standing areas. That makes them a flexible option when appearance matters as well as function.

The listed surfaces include smooth tub materials such as PEVA and tile shower floors. Confirm that your floor is compatible before installation, and apply the stickers only after cleaning and drying the area. The pieces are removable according to the supplied description, but removal can depend on the surface and how the stickers have been maintained.

Pros:

  • Clear snowflake design adds texture without a solid-color mat.
  • Twenty-four pieces allow a range of layouts.
  • Raised surface is designed to improve traction while allowing water to flow through.
  • Includes a scraper to help with application.

Cons:

  • Separate pieces take more planning to space evenly than a single mat.
  • Actual coverage depends on tub size and sticker placement.

Verdict: This is a good fit if you want clear, decorative stickers and enough individual pieces to arrange coverage across a broad area.

3. Clear Bloom Hexagons for Broad, Geometric Coverage

Clear Bloom’s 24 stickers are clear hexagons measuring 3.25 inches by 3.25 inches. The brand describes the set as enough for two typical tubs when arranged strategically, with about 12 pieces per tub. Actual coverage will vary with the floor’s shape and the spacing you choose.

The micro-pyramid texture is designed to provide traction while channeling water through the spaces between raised areas. The package also includes a scraper and a step-by-step placement guide. Those details may be helpful if you want a more even layout or are applying stickers for the first time. Individual pieces can be replaced as needed, according to the product description.

The listed compatible surfaces include acrylic, fiberglass, porcelain or enamel, glazed tile, glass, and sealed stone. That is a broader stated surface range than the other options in this group, but the product still calls for a clean, dry surface and recommends slow, low-angle peeling for removal. Check the care instructions for your tub material before you install or remove adhesive products.

Pros:

  • Twenty-four hexagons offer flexible placement and broad potential coverage.
  • Includes a scraper and placement guide.
  • Product information lists several common non-porous bathroom surfaces.
  • Individual stickers can be replaced without redoing the full layout.

Cons:

  • The clear geometric pattern may be more noticeable than narrow strips.
  • Coverage for two tubs depends on the size and layout of each tub.

Verdict: Pick Clear Bloom if you want a clear, geometric design, a placement guide, and a product listing that specifies compatibility with several common bathroom surfaces.

4. Secopad Blue Shell Stickers for a Smaller Decorative Set

This Secopad set contains 12 blue shell-shaped stickers and a silicone scraper. The product description lists the pieces at about 3.15 inches across and says the set is intended to cover at least one-third of a tub’s surface. That makes it a smaller option than the 24-piece Secopad sets and the 20-piece sea-life set.

The textured tops are designed to add friction, and the spaces between the raised areas are intended to let water move through. The blue shell design is more visible than the clear options, which may suit a bathroom where you want the stickers to look like part of the decor. The listing describes the adhesive as suitable for smooth surfaces, including soft PEVA material.

Because there are fewer pieces, measure your tub and plan the layout before applying them. A dozen stickers may not provide as much coverage as you want in a wide shower or large tub. The supplied details say the adhesive can be removed without residue, but test carefully if your surface has a special finish.

Pros:

  • Blue shell shapes add a noticeable decorative accent.
  • Includes a scraper for pressing down the stickers.
  • Raised texture is designed to increase friction underfoot.
  • Smaller set may suit targeted placement or a compact tub.

Cons:

  • Twelve pieces provide less potential coverage than the larger sets.
  • Blue stickers are more visible than clear designs.

Verdict: Choose this set if you like the blue shell look and need a smaller group of stickers for a compact or selectively covered area.

5. Secopad Submarine and Sea Life Stickers for a Playful Bath

This set includes 20 submarine and sea-life stickers, each about 4.5 by 3.5 inches, plus a silicone scraper. The colorful designs are intended to make the tub more engaging for children while adding textured areas underfoot. The product description also notes that some stickers can be used on a shower wall or refrigerator, though their main listed purpose is bathtub traction.

The pieces are larger than the clear strips and snowflake stickers, so they may be easier to spot and arrange as a playful pattern. The textured surface is described as skin-friendly, and the adhesive is intended for smooth surfaces. As with any peel-and-stick product, use the stickers only on a surface that is clean, dry, and suitable for adhesive.

The bright designs are a trade-off: they can make bath time feel more fun, but they will stand out more than clear stickers. The product is aimed in part at children, but the stickers do not make a tub risk-free. Keep supervising children in and around water, and check the stickers regularly for lifting edges or wear.

Pros:

  • Sea-life designs add a playful look to a child’s bathroom.
  • Twenty pieces offer more coverage than the 12-piece shell set.
  • Large stickers may be easy to arrange in a themed layout.
  • Includes a scraper for installation.

Cons:

  • Colorful designs are more noticeable than clear options.
  • Stickers do not replace adult supervision or other safe bathing practices.

Verdict: This is the most playful choice for families who want themed bath decor along with textured stickers, provided the more visible design suits your bathroom.

How to Choose the Best Non-Slip Bath Stickers

Check the tub or shower surface

Adhesive stickers need a surface they can grip. Product listings commonly recommend smooth, clean, dry surfaces, while Clear Bloom names several materials, including acrylic, fiberglass, porcelain or enamel, glazed tile, glass, and sealed stone. Compare the product’s compatibility details with your tub or shower care instructions. If the finish is textured, damaged, or treated with a coating, check with the surface manufacturer before applying stickers.

Choose a layout that suits the floor

Strips, hexagons, and snowflake shapes create different kinds of coverage. Strips let you build narrow rows, while larger shapes can be spaced across a wider area. Count and size alone do not tell the whole story: a curved or compact tub may need a different arrangement from a broad shower floor. Plan where your feet usually land and leave enough room for water to drain.

Decide how visible you want the stickers to be

Clear stickers are a subtle choice if you want to keep the original look of your tub. Blue shells and colorful sea-life designs are more decorative and easier to see. Consider the color and pattern of your bathroom, but also think about whether the stickers’ edges will be easy to inspect for lifting or wear.

Look at texture and water flow

The products here use raised textures intended to improve grip, with spaces that allow water to pass between them. Texture and shape can affect how the stickers feel underfoot. Read the product details and consider who will use the bath, especially if anyone has sensitive feet. Stickers are meant to add traction, not eliminate all slip risk.

Compare the included tools and installation directions

Each option in this roundup includes a scraper, while Clear Bloom also lists a placement guide. A scraper can help press a sticker flat and push out air during installation. Follow the package directions closely, including any instructions about drying time or how to remove the stickers. Do not use the tub until the stickers are firmly attached and the surface is ready for use.

Think about upkeep and replacement

Bath stickers need regular cleaning, just like other parts of a tub or shower. Clear Bloom says its stickers can be wiped with mild soap and water and that individual pieces can be replaced as needed. For any set, check the product’s care instructions and inspect the edges periodically. Replace or remove a sticker if it begins to peel, trap grime, or feel less secure.

Frequently Asked Questions

Do bath stickers work on every tub or shower floor?

No. Adhesive performance depends on the material and condition of the surface. The listings describe these products for smooth or specified non-porous surfaces, but not every tub finish is suitable. Check the product details and your tub’s care instructions before installing them.

How should I prepare the surface before applying stickers?

Follow the directions supplied with your chosen set. The product information generally calls for a clean, dry surface. Remove soap film and other residue, then let the area dry fully before applying the stickers. Use the included scraper if the instructions recommend it.

Can I arrange the stickers in any pattern?

Most of these sets use separate pieces that can be placed in a layout of your choice. Plan the arrangement before peeling off the backing, and consider the tub’s shape and the areas where you need coverage. Leave a sensible path for water to drain.

Are clear stickers less noticeable?

Clear strips, snowflakes, and hexagons are designed to blend in more than blue shells or colorful sea-life shapes. They can still be visible because of their raised texture and edges, so do not expect them to disappear completely against every tub finish.

Can bath stickers prevent falls?

They are designed to add traction, but no sticker can guarantee that a tub or shower is slip-proof. Use care when entering and exiting, keep the area clean, and supervise children around water. Consider additional safety measures if someone in your household needs extra support.

Can I remove the stickers later?

The Secopad descriptions say their adhesive can be removed without leaving residue, and Clear Bloom recommends peeling slowly at a low angle. Results can vary with the surface and how long the stickers have been in place. Follow the maker’s removal instructions and test a small area first if you are concerned about the finish.

Which set is best for a children’s bathroom?

The Secopad submarine and sea-life set is the most clearly themed for children. Its playful designs may suit a family bathroom, but they do not replace adult supervision. For a quieter look, the clear Secopad or Clear Bloom options are less colorful.

Final Recommendation

For a low-visibility look and flexible placement, the Secopad clear strips are a straightforward pick. The Clear Bloom set stands out for its placement guide and its stated compatibility with several common bathroom surfaces, while the Secopad sea-life set is the most playful choice for a child’s tub. Before buying, match the sticker material and coverage to your floor, then follow the installation and care directions closely.

Rate this post
Spread the love

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top