Crash bar door hardware lets people open an exit door by pushing a bar instead of turning a knob, which can make busy entrances and emergency exits easier to use. The right device depends on your door’s width and handing, the type of exterior access you need, and whether you want a dogging feature that holds the latch open. Below are five options with different fits and features; confirm that your choice matches your door and applicable building and fire-safety requirements.
Table of Contents
Quick Comparison
| Product | Door fit | Standout features | Best suited for |
|---|---|---|---|
| Dynasty Push Bar Panic Exit Device | 30–36 inches | Keyed exterior lever, dogging, Grade 1 certification | Wood or metal doors needing keyed outside access |
| VEVOR Stainless Steel Panic Exit Device | 30–36 inches | 304 stainless steel, keyed exterior handle, dogging | High-traffic wood or metal doors |
| FORTSTRONG Commercial Panic Bar | 31–47 inches | UL listed, dogging key, keyed exterior handle | Wider doors and varied door materials |
| Zonon Commercial Door Push Bar | 30–36 inches | Powder-coated steel, reversible, cut-to-fit | Basic push-bar access on wood or metal doors |
| Yale 2100 Rim Exit Device | 32–36 inches | ANSI/BHMA A156.3 Grade 1, satin stainless finish | Those prioritizing a specified Grade 1 rim device |
Our Picks: Best Crash Bar Door Hardware reviews
1. Dynasty Push Bar Panic Exit Device: Best All-Around Keyed Option
The Dynasty device combines an interior push bar with a keyed exterior lever. Its 31-inch body is designed for doors 30 to 36 inches wide and can be cut to size. The device is reversible for right- or left-hand doors and is specified for wood or metal, not glass storefront doors.
For busy entrances, the dogging feature can hold the latchbolt retracted, so people can push or pull the door without operating the bar or lever. The set includes a dogging hex key and uses a six-pin SC4 keyway cylinder. Dynasty states that the device is Grade 1 certified, ADA approved, and tested for more than half a million cycles.
This is a well-rounded choice if you want outside access controlled by a key as well as a straightforward push-to-exit function. Its main limitation is its stated door-width range; it is not the pick for a wider door or a glass storefront. Check the door and hardware requirements before installation, particularly if the opening is part of a rated assembly.
Pros:
- Keyed exterior lever is included
- Reversible for right- or left-hand doors
- Dogging feature and hex key are included
- Specified for 30- to 36-inch wood or metal doors
Cons:
- Not intended for glass storefront doors
- May need cutting to fit some doors within its stated range
Verdict: Choose the Dynasty if you need a reversible, keyed push-bar device for a 30- to 36-inch wood or metal door.
2. VEVOR Stainless Steel Panic Exit Device: Best for a Stainless Build
VEVOR’s push bar is made from 304 stainless steel and measures about 31.9 inches long. It is designed for 30- to 36-inch wood or metal doors and can be installed on either a left- or right-hand door. The description says it is not suitable for glass doors.
The bar opens from inside with a push, while the exterior handle requires a key. It is described as automatically locking when the door closes. A dogging feature can hold it in a constant-open mode, which may be useful for planned periods of frequent passage. The product information also describes the steel as rust- and corrosion-resistant, but does not provide a fire-door certification.
This option stands out for its stainless construction and included exterior access function. Before choosing it, check the listed dimensions against your door and confirm that the hardware is appropriate for the specific exit opening. Its description does not establish compatibility with every door or code requirement.
Pros:
- 304 stainless steel construction
- Keyed exterior handle is described
- Dogging feature provides a constant-open mode
- Reversible for left- or right-hand doors
Cons:
- Not suitable for glass doors
- Its listed dimensions should be checked against your door before ordering
Verdict: Consider the VEVOR if you want a stainless-steel device with keyed exterior access for a compatible wood or metal door.
3. FORTSTRONG Commercial Panic Bar: Best for a Wider Door Range
FORTSTRONG lists this black, UL-listed panic bar as 31 inches long and suitable for doors from 31 to 47 inches wide. That broader stated range makes it different from the other push-bar options here, which are generally specified for doors up to 36 inches. Confirm the door measurements and installation layout before you buy.
The device is reversible and comes with a reversible roller striker and shim. Its description lists wood, metal, and composite doors as compatible materials, and includes a keyed exterior handle and a dogging key. FORTSTRONG also says the bar has been tested for more than half a million cycles.
The wider door range and material flexibility may make this a practical choice for facilities with nonstandard openings. However, the product details do not list a door-thickness range, so that is worth checking with the manufacturer or installer. As with any exit device, UL listing alone does not confirm that a particular installation meets every local requirement.
Pros:
- Stated to fit doors from 31 to 47 inches wide
- Includes a keyed exterior handle and dogging key
- Reversible design with roller striker and shim
- Specified for wood, metal, and composite doors
Cons:
- Door-thickness compatibility is not specified in the supplied details
- Its 31-inch minimum door width is wider than some other options
Verdict: The FORTSTRONG is worth considering when you need a keyed, reversible panic bar for a door wider than the common 36-inch maximum.
4. Zonon Commercial Door Push Bar: Best Simple Cut-to-Fit Option
The Zonon is a 31-inch push bar with a lever handle and powder-coated steel construction. It is specified for 30- to 36-inch doors and can be adjusted or cut to fit. Its reversible design is intended to work on either left- or right-hand wood and metal doors.
This device focuses on the basic push-to-release function and a simple silver finish. The description does not specify a keyed exterior cylinder or a dogging feature, so do not assume it provides controlled outside entry or a hold-open mode. It is also not designed for glass storefront doors.
For a straightforward installation, the cut-to-fit design may help accommodate a door within its stated size range. Still, cutting hardware requires careful measurement, and you should confirm what exterior access and locking functions your opening needs before selecting this model.
Pros:
- Powder-coated steel construction
- Reversible for left- or right-hand doors
- Adjustable and cut-to-fit for 30- to 36-inch doors
- Specified for wood and metal doors
Cons:
- Keyed exterior access is not specified in the supplied details
- Not designed for glass storefront doors
Verdict: Choose the Zonon for a basic, reversible push bar when its listed door fit works and you do not need an exterior keyed function that is not specified.
5. Yale 2100 Rim Exit Device: Best Specified Grade 1 Rim Device
Yale’s 2100 is a rim exit device in a satin stainless steel finish. It is specified for doors 32 to 36 inches wide, is non-handed, and is certified to ANSI/BHMA A156.3 Grade 1. The supplied product information focuses on the exit device itself rather than detailing exterior trim or keyed access.
This is the most clearly specified standards-focused option in the group. Its non-handed design can simplify selection when you do not want to match a left- or right-hand version. Before ordering, confirm whether the listed configuration includes the outside hardware you need; the provided details do not say that a lever or keyed cylinder is included.
The narrower stated fit also means it is not the right match for every opening. Check the door width, existing hardware, and any requirements for the full door assembly. A qualified installer can help confirm the correct configuration.
Pros:
- ANSI/BHMA A156.3 Grade 1 certification is specified
- Non-handed design
- Satin stainless steel finish
- Designed for 32- to 36-inch doors
Cons:
- Exterior trim and keyed access are not specified in the supplied details
- Not listed for doors outside the 32- to 36-inch range
Verdict: Consider the Yale if you want a Grade 1 rim device and can verify that its configuration and door fit meet your needs.
How to Choose Crash Bar Door Hardware
Match the device to your door width
Start by measuring the door and checking the manufacturer’s stated fit range. A bar’s overall length is not always the same as the door-width range it supports. The options here cover different spans: several are listed for doors 30 to 36 inches wide, the Yale is specified for 32 to 36 inches, and the FORTSTRONG is listed for 31 to 47 inches. Confirm the actual measurements and any cut-to-fit instructions before ordering.
Check handing and door material
A reversible or non-handed device can work on either left- or right-hand doors, but the product details should say so. Also confirm the door material. The Dynasty, VEVOR, and Zonon options are described for wood or metal doors, while FORTSTRONG also lists composite doors. Several products specifically exclude glass storefront doors, so do not assume a standard push bar will fit a glass entry.
Decide whether you need keyed exterior access
Some devices include an exterior lever or handle that requires a key; others do not clearly specify outside trim. If staff need to enter from outside, check whether the complete package includes the correct handle, cylinder, and keys. In particular, confirm the Yale configuration before buying if you need keyed exterior access, since that detail is not included in the supplied product information.
Consider dogging and hold-open needs
Dogging holds the latch retracted so people can pass through without operating the bar each time. It can be useful during deliveries or other periods of frequent traffic. Check whether the feature is included and how it is operated, and use it only when appropriate for the door’s purpose and applicable safety requirements.
Look for the specifications your opening requires
Compare certifications, cycle testing, finish, and construction details, but do not treat one specification as proof that a device is suitable for every installation. The Dynasty and Yale descriptions specify Grade 1 credentials, and FORTSTRONG identifies its device as UL listed. Confirm the exact hardware configuration and applicable local requirements for your door and building.
Plan for fit, installation, and the full door assembly
Check the installation instructions and required mounting hardware before you start. A device may need cutting, adjustment, or door preparation. If the door is part of a fire-rated assembly or serves a required exit, verify compatibility with the complete assembly and local code. A qualified door-hardware professional can help confirm fit and installation details.
FAQs
What does a crash bar do?
A crash bar, also called a panic bar or exit device, releases a door when someone pushes the bar from the inside. This allows people to open the door without turning a knob or lever.
What is the difference between a push bar and a panic bar?
The terms are often used for door hardware with a bar that releases the latch when pushed. Product features vary, so check the device’s fit, certification, exterior access, and installation details rather than relying on the name alone.
Can I install crash bar hardware on a glass storefront door?
Not every device is designed for glass doors. Several products in this roundup specifically exclude glass storefront doors. Check the manufacturer’s instructions and choose hardware made for the door type you have.
What does a dogging feature do?
Dogging holds the latchbolt retracted, allowing the door to open without pushing the bar to release the latch each time. It may be useful for planned high-traffic periods, but confirm how the feature works and whether its use is appropriate for your opening.
Do these devices include a keyed exterior handle?
The Dynasty, VEVOR, and FORTSTRONG descriptions specify a keyed exterior handle or lever. The supplied details for the Yale do not specify exterior trim, and the Zonon details do not specify a keyed cylinder. Check the exact package configuration if outside entry is important.
How do I know whether a device fits my door?
Measure the door and compare it with the product’s stated door-width range. Also check handing, door material, and any installation or cutting requirements. If you are unsure, ask a qualified installer to confirm the fit.
Does a Grade 1 or UL-listed device automatically meet my building’s requirements?
No single product specification confirms that a device is suitable for every door or installation. Check the exact product configuration and consult local requirements or a qualified professional, especially for required exits and fire-rated assemblies.
Final Recommendation
For a broad mix of useful features on a standard-width wood or metal door, the Dynasty is the strongest all-around choice in this group: its listed features include a keyed exterior lever, reversible installation, dogging, and Grade 1 certification. If your door is wider, compare its measurements with the FORTSTRONG’s stated 31- to 47-inch range. For any option, verify the complete hardware configuration and door requirements before ordering.