Finding the best TV wall mount for a corner means looking beyond screen size: you also need enough arm reach to bring the TV around the corner, a VESA pattern and weight limit that match your set, and a wall surface that can support the mount. These five full-motion options range from compact mounts for smaller TVs to long-arm models made to reach farther into a room.
Table of Contents
Quick Comparison
| TV Mount | TV Size Range | Weight Limit | Maximum Extension | Best For |
|---|---|---|---|---|
| Perlegear Long Arm Corner TV Wall Mount | 37–75 inches | 100 lb | 32.37 inches | Large TVs and flexible seating positions |
| USX MOUNT 31.22-Inch Long Arm Corner Mount | 26–65 inches | 80 lb | 31.22 inches | Medium-size TVs in a corner |
| Pipishell Full Motion Corner TV Wall Mount | 26–65 inches | 88 lb | 19.51 inches | Height adjustment and everyday flexibility |
| PERLESMITH Full Motion Corner TV Wall Mount | 26–65 inches | 70 lb | 19.17 inches | A streamlined, pre-assembled option |
| USX STAR 32-Inch Long Arm Corner TV Mount | 37–84 inches | 100 lb | 32 inches | Large screens and extended reach |
Our Picks: Best Tv Wall Mount For Corner reviews
1. Perlegear Long Arm Corner Mount: Best Overall Reach for Larger TVs
The Perlegear is a strong fit if your corner setup calls for a large TV and a long reach. It supports 37- to 75-inch screens weighing up to 100 pounds and lists VESA compatibility from 200 x 100 mm to 600 x 400 mm. Check your TV’s measurements and mounting pattern before choosing it.
Its arm extends up to 32.37 inches and retracts to 3.12 inches from the wall. The mount swivels up to 90 degrees in either direction and tilts from -15 to +5 degrees. Tool-free tilt adjustment and up to 4 degrees of post-install leveling provide useful ways to fine-tune the screen after installation.
The long extension is helpful when the TV needs to come out from a corner to face seating elsewhere in the room. The trade-off is that a long arm makes careful installation especially important: the mount must be attached to a suitable wall structure, not drywall alone. Its size and reach may also be more than you need for a small TV or a viewing position close to the corner.
Pros:
- Long 32.37-inch extension for flexible room layouts
- Supports TVs up to 75 inches and 100 pounds
- Wide listed VESA range up to 600 x 400 mm
- Tool-free tilt and post-install leveling
Cons:
- Requires a suitable mounting surface; drywall alone is not supported
- Its long arm may be unnecessary in compact setups
Verdict: Choose the Perlegear if you want a long-reach corner mount for a larger TV and your screen fits its weight and VESA limits.
2. USX MOUNT 31.22-Inch Arm: A Long-Reach Pick for TVs up to 65 Inches
This USX MOUNT model pairs a long arm with a size range suited to many small and medium TVs. It fits listed screen sizes from 26 to 65 inches, supports up to 80 pounds, and works with VESA patterns from 75 x 75 mm to 400 x 400 mm.
The arm extends 31.22 inches and retracts to 2.52 inches. It also offers up to 90 degrees of swivel, tilt from -12 to +5 degrees, and 4 degrees of post-install leveling. That combination can help you pull the screen out from a corner for viewing, then fold it back when you want a tidier profile.
Compared with the Perlegear and USX STAR, this model has a lower listed weight limit and tops out at 65-inch TVs. It may be a practical middle ground if you need a long reach but do not need a mount rated for a larger screen. The product information says concrete anchors or M8 x 50 screws may be requested, so confirm the included hardware is right for your wall before installation.
Pros:
- Long extension for directing the screen toward different seating areas
- Retracts to 2.52 inches from the wall
- Offers swivel, tilt, and post-install leveling
- Fits a broad range of smaller VESA patterns
Cons:
- Limited to TVs weighing 80 pounds or less
- Some wall-specific hardware may need to be requested
Verdict: Pick this mount for a TV up to 65 inches when a long arm and compact retraction matter more than a higher weight capacity.
3. Pipishell Full Motion Mount: Best for Added Height Adjustment
The Pipishell mount is designed for most 26- to 65-inch flat and curved TVs weighing up to 88 pounds. Its listed VESA range is 100 x 100 mm to 400 x 400 mm. One useful distinction is its three levels of height adjustment after installation, which can help when you need to adjust the screen’s position without relocating the wall plate.
The arm extends 19.51 inches and retracts to 3.53 inches. It swivels up to 90 degrees in either direction and tilts from -15 to +5 degrees. These adjustments can help you aim the screen toward a seat or reduce glare, though the shorter extension will not reach as far across a room as the two 32-inch-class options.
Post-install leveling adjusts by up to 3 degrees, and the mount includes security lock screws to help secure the TV to the wall plate. This is a versatile choice if you value height adjustment and do not need maximum arm reach. As with any wall mount, verify the TV’s size, weight, and VESA pattern before buying.
Pros:
- Three levels of height adjustment after installation
- Supports TVs up to 88 pounds
- Full-motion swivel and tilt adjustment
- Includes security lock screws and post-install leveling
Cons:
- Less extension than the long-arm alternatives
- Does not list compatibility with VESA patterns above 400 x 400 mm
Verdict: Choose the Pipishell if you want post-install height adjustment and your corner layout does not require an extra-long arm.
4. PERLESMITH Full Motion Mount: A Simple Option with a Pre-Assembled Design
This PERLESMITH mount fits most 26- to 65-inch TVs weighing up to 70 pounds, with VESA patterns from 100 x 100 mm to 400 x 400 mm. Its pre-assembled design is intended to reduce installation steps, making it a straightforward option if you want a full-motion mount without the extra reach of a long-arm model.
The arm extends 19.17 inches and retracts to 3.2 inches. You can swivel it up to 90 degrees in either direction, tilt from -15 to +5 degrees, and level the screen by up to 3 degrees after installation. These adjustments give you useful control over viewing angle, but its reach is shorter than the two long-arm options in this lineup.
The listed installation surfaces are single wood studs, solid concrete, or brick; it cannot be installed on drywall alone. Its 70-pound capacity is also the lowest among these five picks, so check your TV’s weight carefully, especially if you have a larger set.
Pros:
- Pre-assembled design aims to reduce installation steps
- Offers swivel, tilt, and post-install leveling
- Retracts to 3.2 inches from the wall
- Includes mounting hardware and an instruction manual
Cons:
- Lower weight limit than the other options here
- Cannot be mounted on drywall alone
Verdict: Consider the PERLESMITH for a compatible TV when you want a pre-assembled, full-motion mount and do not need a long arm.
5. USX STAR 32-Inch Arm: Best for Large TVs and Extended Viewing Reach
The USX STAR is built for a broad listed range of TV sizes, from 37 to 84 inches, and supports TVs up to 100 pounds. Its VESA compatibility runs from 200 x 100 mm to 600 x 400 mm, making it one of the more flexible options here for larger mounting patterns. Always confirm your particular screen meets every listed limit.
The arm extends 32 inches and retracts to 2.52 inches. It tilts from -15 to +5 degrees, swivels up to 90 degrees in either direction, and allows up to 4 degrees of leveling. The listed maximum swivel can depend on screen size, so a large TV may not turn as far as a smaller one in the same room.
The product information also lists cable-management straps, a bubble level, and pre-labeled hardware. Concrete anchors are available by request, so check what is included for your wall type before starting. Its extended arm and large-screen capacity make it a close alternative to the Perlegear, while the Perlegear lists a slightly longer maximum extension.
Pros:
- Fits listed TV sizes up to 84 inches
- Supports up to 100 pounds and VESA patterns up to 600 x 400 mm
- 32-inch extension with compact retraction
- Includes listed cable-management straps and a bubble level
Cons:
- Concrete anchors may need to be requested
- Maximum swivel angle depends on screen size
Verdict: Choose the USX STAR if you need a long-reach mount for a larger TV and its size, weight, and VESA limits match your set.
How to Choose a Corner TV Wall Mount
Match the mount to your TV’s size, weight, and VESA pattern
Start with the TV’s user manual or the product specifications. Check its screen size, weight without the stand, and VESA pattern—the horizontal and vertical spacing between the mounting holes on the back. A mount must fit all three. Do not assume that a mount made for a particular screen size will fit every TV of that size.
Measure how far the arm needs to reach
In a corner, the arm’s maximum extension affects how far you can pull the screen into the room and turn it toward your seating area. Measure from the planned mounting point to the viewing position, then compare that distance with the mount’s listed reach. Longer arms can offer more positioning options, while shorter arms may suit a nearby seat and keep the TV closer to the wall.
Check the wall and mounting surface
These mounts are not designed to attach to drywall alone. Check the product instructions for approved surfaces and confirm that the mounting points line up with suitable structural support, such as a wood stud or solid masonry where specified. Wall materials and fasteners vary, so use hardware approved for your wall type and follow the mount’s installation directions.
Consider swivel, tilt, and leveling adjustments
Swivel helps aim the TV toward seats that are not directly in front of the corner. Tilt can help change the viewing angle or reduce glare. Post-install leveling is useful for correcting a slightly uneven screen after the mount is attached. Compare the adjustment ranges, but remember that the TV’s size and the room layout can affect how much it can actually turn.
Plan for clearance and cable access
Before mounting, think about nearby walls, furniture, windows, and doorways. A TV that swings out from a corner needs enough clearance to move without hitting nearby surfaces. Also consider how cables will reach the screen when the arm is extended and whether you can access the connections after installation.
Review the included hardware and installation requirements
Check the product details for the included hardware and any items that need to be requested or purchased separately. Some mounts list hardware for particular wall types, but the correct fastener depends on your installation surface. If you are unsure about the wall structure or the safe way to secure the mount, ask a qualified installer rather than guessing.
Frequently Asked Questions
Can I mount a TV in a corner with a full-motion mount?
Yes. A full-motion mount can pull the TV away from the wall and swivel it toward your seating area. For a corner installation, compare the mount’s extension and swivel range with the room’s layout, and check that the arm and screen have enough clearance to move.
Can these TV mounts be installed on drywall alone?
No. The product information for these mounts requires a suitable supporting surface, such as wood studs or solid masonry, depending on the model. Drywall alone is not an appropriate mounting surface for these listed products.
How do I know whether a mount fits my TV?
Check the TV’s screen size, weight, and VESA pattern, then compare all three with the mount’s specifications. A match on screen size alone is not enough to confirm compatibility.
Is a longer arm always better for a corner TV?
Not necessarily. A longer arm can reach farther into the room and offer more positioning flexibility, but it may be unnecessary if your seating is close to the corner. Measure the required reach and consider nearby obstacles before choosing.
Can I swivel a large TV the full amount listed?
Not always. The USX STAR listing notes that the maximum swivel depends on screen size. The room layout, TV dimensions, and nearby walls can also limit movement, so allow for clearance when planning the installation.
Do these mounts work with curved TVs?
The Pipishell product information specifically lists compatibility with most flat and curved TVs within its size, weight, and VESA limits. For the other mounts, confirm fit with the TV and mount specifications before buying.
Final Recommendation
For a corner installation that needs extra reach and supports a larger screen, the Perlegear is the strongest all-around option in this group, with a 32.37-inch arm and a 100-pound capacity. The USX STAR is another long-arm choice with a wider listed screen-size range, while the Pipishell is worth considering if post-install height adjustment matters more than maximum extension. Before choosing any mount, confirm your TV’s VESA pattern and weight, and make sure your wall can support the installation.
