Choosing a commercial toilet paper holder is about more than keeping a roll off the floor. The right dispenser should match your paper supply, restroom traffic, wall space, and refill routine. These five options range from compact standard-roll models to locked dispensers that hold two rolls or a large jumbo roll.
Table of Contents
Quick Comparison
| Product | Roll capacity | Construction | Best for |
|---|---|---|---|
| Stardrix 2-Roll Stainless Steel Dispenser | Two standard rolls, up to 5 inches in diameter | Stainless steel | Busy restrooms that need a secured backup roll |
| Gorlary Jumbo Toilet Paper Dispenser | One roll up to 9 inches in diameter | Stainless steel | Fewer refills with jumbo-roll supplies |
| San Jamar Locking Standard-Roll Dispenser | One standard roll, up to 4 inches wide | 20-gauge steel with chrome finish | Compact restrooms using standard rolls |
| Pollock Twin Jumbo Toilet Tissue Dispenser | Two rolls, up to 9 inches in diameter each | Break-resistant ABS plastic | Restrooms that need two jumbo rolls in one dispenser |
| EnBath Two-Roll Stainless Steel Dispenser | Two rolls | Stainless steel | Facilities wanting a locked, easy-to-clean two-roll holder |
Our Picks: Best Commercial Toilet Paper Holders reviews
Stardrix: A Locking Two-Roll Dispenser for Busy Restrooms
The Stardrix holds two standard rolls up to 5 inches in diameter. When the first roll is used up, the spare drops into place, so staff do not have to replace the roll as soon as it runs out. A retaining mechanism keeps the backup roll unavailable until the first roll is depleted.
Its stainless steel housing and lock are designed for public and other high-traffic restrooms where access to the rolls should be controlled. The dispenser is surface-mounted and comes with screws and anchors. The manufacturer says it is designed to meet ADA standards when installed correctly, so check placement and installation details for your space rather than assuming the dispenser alone guarantees compliance.
This is a practical fit for facilities that use standard-size rolls and want a backup ready without using a jumbo-roll system. Its capacity is more limited than the jumbo models here, and the roll diameter limit means you should confirm that your regular supply fits before ordering.
Pros:
- Holds two standard rolls, up to 5 inches in diameter.
- Automatically moves the spare roll into use when the first is depleted.
- Locking design helps restrict access to the rolls.
- Stainless steel construction and included mounting hardware.
Cons:
- Does not accommodate jumbo rolls.
- Rolls must fit the stated size limit to work properly.
Verdict: Choose the Stardrix if you want a locked stainless steel dispenser with a ready-to-use backup roll and your facility uses standard rolls that fit its size limit.
Gorlary: A Stainless Steel Holder for Jumbo Rolls
The Gorlary is built around a single jumbo roll up to 9 inches in diameter. It requires a roll with a core of at least 2.5 inches, so check both measurements against the paper your facility buys. A jumbo-roll setup can mean fewer roll changes than a standard-roll holder, though actual refill frequency depends on traffic and usage.
The dispenser has a stainless steel body, a security lock, and a built-in shelf for small personal items. Its black finish gives it a different look from the chrome and stainless options, while the wall-mounted design keeps the paper in a fixed location. The product description does not list a second roll, so it is not a backup-roll option.
This model suits locations that already use compatible jumbo rolls and want a locked dispenser with a shelf. That shelf may be useful, but it also adds a surface that staff may need to include in their regular cleaning routine.
Pros:
- Accommodates a jumbo roll up to 9 inches in diameter.
- Stainless steel construction with a security lock.
- Built-in shelf provides a place for small belongings.
- Black finish offers an alternative to a traditional metal appearance.
Cons:
- Requires a roll with a core of at least 2.5 inches.
- Holds one roll, with no backup roll described.
Verdict: The Gorlary is a good match for a facility that uses compatible jumbo rolls and values a locked stainless steel dispenser with an added shelf.
San Jamar: A Compact, Locking Holder for Standard Rolls
The San Jamar is a single-roll dispenser designed for standard bath tissue up to 4 inches wide. Its locking housing limits access to the roll, while concealed tension springs are intended to help control dispensing and discourage tissue from unrolling freely.
The unit is made from 20-gauge steel with a chrome finish. Its one-roll capacity makes it a compact choice for facilities that want a straightforward, secured holder and do not need space for a spare roll inside the dispenser. Unlike the two-roll options, it will need attention when the roll runs out.
Before choosing it, check that your paper fits the stated width and that your refill routine can keep up with restroom use. The product description specifies roll width but does not provide a maximum roll diameter, so confirm compatibility if your standard rolls are unusually large.
Pros:
- Compact single-roll design for standard bath tissue.
- Locking housing helps restrict access to the roll.
- Concealed tension springs are designed to help control dispensing.
- Steel construction with a chrome finish.
Cons:
- Holds only one roll, so there is no backup inside the dispenser.
- Roll width must be 4 inches or less.
Verdict: Pick the San Jamar for a compact, locking standard-roll holder when a single-roll capacity suits your refill schedule.
Pollock: A Twin Jumbo Dispenser with Visible Roll Levels
The Pollock holds two jumbo rolls up to 9 inches in diameter. Its sliding panel limits access to the second roll until the first is used, helping keep the backup roll in reserve. Two viewing slots let staff check paper levels without opening the unit, and the top lock provides access for refills.
The body is made from break-resistant ABS plastic rather than stainless steel. That may suit a restroom where a lighter-looking plastic dispenser is preferred, but facilities specifically seeking a metal housing should consider the Stardrix or EnBath instead. The product also describes a compact shape, though you should check the mounting space and stall layout before installation.
This model is a useful option for facilities that use jumbo rolls and want two-roll capacity with visible supply levels. Keep in mind that the twin-roll design requires room for the dispenser and compatible rolls, and its plastic construction differs from the metal options in this list.
Pros:
- Holds two jumbo rolls up to 9 inches in diameter.
- Sliding panel keeps the second roll in reserve until needed.
- Viewing slots make it easier to check roll levels.
- Locking, front-loading design supports staff refills.
Cons:
- Made from ABS plastic rather than stainless steel or steel.
- Requires compatible jumbo rolls and space for a twin dispenser.
Verdict: The Pollock is worth considering if you want two jumbo rolls, a visible supply check, and a backup roll that stays covered until the first is depleted.
EnBath: A Two-Roll Stainless Steel Holder with a Simple Design
The EnBath is a wall-mounted stainless steel dispenser with space for two rolls. The second roll automatically moves into position when the first is low, and a lock helps limit access to the paper. Its listed dimensions are 5⅝ inches deep, 6 inches wide, and 12 inches high, which can help when checking a wall or stall for fit.
The stainless steel surface is described as easy to clean, and the product includes a key for the lock. Its two-roll format is useful when you want a backup without moving to a jumbo dispenser. The product description does not specify a maximum roll diameter, however, so confirm that the rolls you plan to use fit the unit.
Compared with the Stardrix, the EnBath also offers two-roll stainless steel construction, but the Stardrix listing provides a specific maximum roll diameter and describes its spare-roll retaining mechanism in more detail. The EnBath may be the better fit if its stated dimensions suit your installation and its roll compatibility checks out.
Pros:
- Holds two rolls with an automatic move to the second roll.
- Stainless steel construction and a lock with an included key.
- Listed dimensions help with installation planning.
- Surface is described as easy to clean.
Cons:
- The product description does not state a maximum roll diameter.
- Roll size should be confirmed before purchase.
Verdict: Choose the EnBath if you want a two-roll stainless steel dispenser and its dimensions and roll compatibility fit your restroom.
How to Choose a Commercial Toilet Paper Holder
Match the dispenser to your roll type
Start with the paper your facility already stocks. Standard rolls and jumbo rolls are not interchangeable in every dispenser. Check the listed diameter, width, and core requirements against the actual rolls you plan to buy. The Stardrix, for example, specifies standard rolls up to 5 inches in diameter, while the Gorlary requires a jumbo roll up to 9 inches across with a core of at least 2.5 inches.
Choose capacity based on your refill routine
A single-roll dispenser can be compact, but it has no spare roll ready when the tissue runs out. A two-roll model can provide a backup and may reduce how often staff need to refill the dispenser. Consider how busy the restroom is and how often staff can check it. A larger capacity is helpful only if the rolls fit and the dispenser can be refilled on schedule.
Consider whether you need a lock
Locks are common on commercial dispensers because they limit casual access to the roll and let staff control refills. Think about who will hold the key and whether the dispenser will be installed in an area where tampering is a concern. A lock adds a step to restocking, so include key access in your maintenance plan.
Compare housing materials and finishes
Stainless steel and steel models offer a metal housing, while the Pollock uses ABS plastic. Material and finish affect the appearance of the restroom and the surface staff will clean. If matching existing fixtures matters, compare the finish and overall design before ordering. Do not assume that a particular material alone guarantees resistance to damage in your setting.
Measure the wall and plan the mounting location
Check the available wall or stall space before choosing a dispenser, especially for a twin or jumbo-roll model. The EnBath lists its dimensions, and the Stardrix is designed for surface mounting with included screws and anchors. For other models, verify the product dimensions and mounting instructions before installation. Position the unit so it is convenient to use, accessible for refills, and appropriate for your facility’s requirements.
Look for features that simplify daily checks
Some dispensers make it easier to see or manage the paper supply. The Pollock has viewing slots, while the Stardrix and EnBath move the spare roll into use as the first roll runs out. The Gorlary adds a small shelf. Choose features that help with your staff’s routine, and consider whether added surfaces or moving parts require extra attention during cleaning and maintenance.
Frequently Asked Questions
What is the difference between a standard-roll and jumbo-roll dispenser?
They are designed for different roll sizes, so the key is to match the holder to your paper supply. The San Jamar, Stardrix, and EnBath are described for standard rolls, while the Gorlary and Pollock are designed for jumbo rolls. Check each dispenser’s size requirements before buying.
Is a two-roll dispenser better for a busy restroom?
It can help keep a spare roll available and may reduce refill interruptions. However, the best choice depends on your roll type, traffic, wall space, and how often staff can service the restroom. A two-roll unit still needs regular checks and refills.
Do these dispensers include mounting hardware?
The Stardrix description says it comes with screws and anchors for surface mounting. The supplied product information does not confirm mounting hardware for every other model, so check the listing details before installation.
Which option has visible roll-level windows?
The Pollock has two transparent viewing slots so staff can check the paper supply without opening the dispenser.
Are the dispensers in this list all made from metal?
No. The Stardrix and Gorlary are described as stainless steel, the San Jamar as 20-gauge steel with a chrome finish, and the EnBath as stainless steel. The Pollock is made from break-resistant ABS plastic.
Does a locking dispenser ensure ADA compliance?
No. A lock does not by itself make a dispenser compliant. The Stardrix is described as designed to meet ADA standards when properly installed, but placement and installation matter. Check the applicable requirements for your facility and installation.
Final Recommendation
For a versatile standard-roll option with a secured backup, the Stardrix stands out because it holds two rolls and specifies its roll-size limit. If your facility uses jumbo paper, consider the Gorlary for a single large roll or the Pollock for two jumbo rolls with visible supply windows. The San Jamar is a compact choice for one standard roll, while the EnBath offers a two-roll stainless steel design with listed dimensions. Before choosing, confirm roll compatibility and measure the planned mounting area.
