Product reviewHeating & Cooling

Best Continuous Flow Water Heaters: Gas, Electric and RV Picks Compared

Updated 11 min read

Reader-supported: when you buy through links on our site, we may earn an affiliate commission at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases. Learn more.

Continuous-flow water heaters heat water as you need it instead of storing a tankful, but the right model depends on your fuel source, climate, electrical service, and how many fixtures you use at once. The picks below include whole-home gas and electric units, plus an RV-specific propane model. Compare their stated flow rates and installation needs carefully—maximum flow does not guarantee the same output in every home.

Quick Comparison

ProductTypeStated flow or outputBest suited for
Rheem RTG Series 7.0 GPM Outdoor Natural Gas Tankless Water HeaterOutdoor natural gasUp to 7.0 GPM at a 35°F riseMulti-bath homes with natural gas
ORBEK RV Propane Tankless Water HeaterRV propane, 12V DC60,000 BTU burnerRV and camper use
Rheem 18kW 240V Electric Tankless Water HeaterElectricUp to 4.4 GPMHomes with suitable electrical service and moderate demand
ThermoMate 27kW Electric Tankless Water HeaterElectric, 240VUp to 6.6 GPMHomes with substantial electrical capacity
A. O. Smith ATI-310CX3 8 GPM Natural Gas Tankless Water HeaterIndoor natural gasUp to 8.0 GPMTwo- to three-bath homes

Our Picks: Best Continuous Flow Water Heaters reviews

Rheem RTG Series: Outdoor Natural Gas for Whole-Home Use

The Rheem RTG Series is a natural-gas whole-home heater designed for outdoor installation. Its stated output is up to 7.0 GPM at a 35°F temperature rise, and the manufacturer positions it for two to three simultaneous showers. Actual flow depends on the incoming water temperature and how much hot water your fixtures draw, so colder inlet water can reduce the available flow.

The unit has a metal cabinet for wall mounting, a digital temperature control with adjustments as fine as 1°F, and built-in freeze and flame-failure protection. Its listed 0.82 UEF and on-demand operation are intended to reduce standby energy use compared with a conventional tank, though your actual savings depend on household use and installation.

Because it is designed to sit outdoors, it avoids indoor venting, but it still needs a suitable location, gas supply, water connections, and professional installation. It is a strong fit for a household with natural gas and several bathrooms. If you need an indoor unit or do not have natural gas, another option will make more sense.

Pros:

  • Whole-home output rated up to 7.0 GPM at a 35°F rise
  • Outdoor installation avoids indoor venting
  • Fine temperature adjustments and built-in safety features
  • Listed 15-year heat exchanger and 5-year parts warranties

Cons:

  • Requires natural gas and a suitable outdoor installation location
  • Professional installation is required

Verdict: Choose the Rheem RTG if you want an outdoor natural-gas unit for a multi-bath home and its installation requirements fit your property.

ORBEK RV Tankless Heater: A Propane Option for Campers

The ORBEK is made for RV and camper hot-water systems, not as a substitute for a whole-home residential heater. It uses a 60,000 BTU propane burner and 12V DC power, producing hot water on demand for RV tasks such as showering, washing dishes, and handwashing. Since it does not store a tankful of hot water, it also avoids the need to replace an anode rod.

Its listed features include a remote control with a 95°F to 123°F adjustment range, a built-in 150 PSI pressure-reducing valve, and a high-altitude mode. The manufacturer also describes staged combustion to help manage temperature changes. The unit uses standard NPT water connections, but you should check your RV’s existing opening dimensions and connections before buying. Optional door panels are sold separately.

This model is most relevant if you are replacing an RV water heater and want a propane-powered continuous-flow setup. It is not a choice for a typical house with whole-home demand. Although the product information describes installation as accessible to RV owners, work on propane and water systems still calls for careful attention to the supplied instructions and safe connections.

Pros:

  • Designed specifically for RV and camper use
  • Uses a 12V DC supply and propane burner
  • Remote temperature control and built-in pressure-reducing valve
  • High-altitude mode is listed for travel at elevation

Cons:

  • Not intended for whole-home residential use
  • Optional exterior door panels are sold separately

Verdict: Consider the ORBEK if you need an RV-specific propane heater and have confirmed that its size and connections suit your existing setup.

Rheem 18kW Electric: A Compact Unit for Moderate Demand

This Rheem is an 18kW, 240V electric tankless heater with a stated maximum flow of up to 4.4 GPM. It uses self-modulation to adjust power to demand and has a digital temperature display with adjustments specified to 1°F. Its copper heating elements are described as field-serviceable, which may be useful when maintenance is needed.

An electric unit can be a practical option when you do not want a gas appliance, but electrical capacity matters. The supplied product details do not specify breaker or wire requirements for this model, so have an electrician check the installation instructions and your panel before purchase. The 4.4 GPM maximum is also lower than the listed capacity of the larger ThermoMate and gas models, making this a less obvious fit for heavy simultaneous use.

The supplied product data marks this model as unavailable. That can change, but it is worth verifying its listing status and installation details before treating it as a ready-to-buy choice. For a home with moderate hot-water demand and compatible electrical service, its simple digital controls and compact tankless format are appealing; for multiple showers at once, compare its capacity closely with your needs.

Pros:

  • Electric operation with no gas connection required
  • Self-modulating power adjusts to hot-water demand
  • Digital temperature display with fine adjustment
  • Field-serviceable copper heating elements

Cons:

  • Up to 4.4 GPM is less than the larger models listed here
  • Marked unavailable in the supplied product data

Verdict: This Rheem may suit moderate demand where electric service is appropriate, but confirm availability and have an electrician verify the required circuit before choosing it.

ThermoMate 27kW: Higher-Output Electric Heating

The ThermoMate is a 240V electric model rated for up to 6.6 GPM, with the manufacturer describing it as suitable for several fixtures depending on incoming water temperature. Its self-modulating controls are designed to adjust heating output as water demand and inlet temperature change. The listed temperature range is 80°F to 140°F.

Its key trade-off is electrical demand. The supplied requirements call for a home main panel with at least 150 amps of total capacity, three separate 40-amp double-pole breakers, and three sets of 8 AWG copper wire. Those are substantial requirements, so do not assume the unit will work with your existing panel. Get a qualified electrician to check the load and wiring plan before you buy.

The heater has a compact wall-mounted design and is ETL listed to the standards named in the product information. Listed protections include over-temperature cutoff, anti-leakage, dry-combustion protection, and surge or lightning protection. Compared with the 18kW Rheem electric model, its stated maximum flow is higher, but it also comes with more demanding electrical requirements. Its maximum flow should not be treated as a promise of that output at every inlet temperature.

Pros:

  • Stated maximum flow of up to 6.6 GPM
  • Self-modulating temperature control
  • Compact wall-mounted design
  • ETL listing and multiple listed safety protections

Cons:

  • Requires three dedicated double-pole breakers and three wire sets
  • Home panel capacity must be checked before purchase

Verdict: Choose the ThermoMate only if an electrician confirms that your home can support its specified electrical load and its flow suits your household.

A. O. Smith ATI-310CX3: Indoor Natural Gas for Multiple Bathrooms

The A. O. Smith ATI-310CX3 is an indoor natural-gas tankless heater rated for up to 8.0 GPM and described for two- to three-bath homes. Its copper heat exchanger is paired with X3 scale-prevention technology, which the manufacturer says helps limit scale buildup and removes the need for annual descaling. Those claims may be especially relevant if mineral scale is a concern, though water conditions and installation still matter.

The unit includes integrated temperature controls and diagnostics, plus safety features such as exhaust and water-temperature controls, an overheat cutoff fuse, and an air-fuel ratio sensor. Its wall-mounted design saves floor space. The product information lists direct-vent installation with vertical or horizontal termination and an included kit to convert from natural gas to propane.

This is a strong match for households that want a higher stated flow rate and have a suitable indoor venting route. Professional installation is recommended. Compared with the outdoor Rheem, the A. O. Smith offers a higher listed maximum flow and a scale-prevention feature, but it has different venting and placement needs. Check whether the included conversion kit and vent arrangement match your project before ordering.

Pros:

  • Stated flow rate of up to 8.0 GPM
  • X3 scale-prevention technology is designed to limit scale buildup
  • Wall-mounted design and integrated diagnostics
  • Propane conversion kit is included

Cons:

  • Requires a suitable indoor venting setup
  • Professional installation is recommended

Verdict: The A. O. Smith is a compelling option for a multi-bath home with natural gas, provided its indoor venting requirements work for your installation.

How to Choose a Continuous-Flow Water Heater

Match the heater to your fuel and power supply

Start by checking what your home or RV can support. The gas models require a gas supply, while the electric models need suitable 240V service. The ThermoMate has especially specific electrical requirements, including three double-pole breakers and a stated minimum main-panel capacity. An electrician or licensed plumber can confirm whether your existing setup is suitable before you commit.

Estimate how much hot water you use at once

Think about the fixtures that may run together, such as a shower, dishwasher, and bathroom sink. Compare that demand with the heater’s stated flow rate, but do not use the maximum number as a guarantee. Flow can change with the temperature of the incoming water and the temperature rise the heater must provide. Colder incoming water may mean less hot water can be delivered at once.

Choose the right installation location

Some units are designed for outdoor installation, while others need indoor venting. The Rheem RTG is an outdoor natural-gas model, and the A. O. Smith is an indoor direct-vent unit. Check the manufacturer’s installation instructions, local requirements, and available space. Placement, venting, and safe gas or electrical connections are key parts of the decision—not details to leave until after purchase.

Separate RV systems from whole-home systems

An RV heater is designed around a camper’s power, fuel, opening, and plumbing setup. The ORBEK uses propane and 12V DC and lists specific RV cutout sizes for optional door panels. It should not be compared as if it were a whole-home unit. Before buying an RV replacement, measure the opening and confirm the connections match your current system.

Consider maintenance and water conditions

Scale can affect tankless heaters, especially where water has a high mineral content. The A. O. Smith includes X3 scale-prevention technology, while the Rheem electric model has field-serviceable heating elements. Check the maintenance instructions for the exact model and consider your local water conditions. A feature intended to reduce maintenance does not remove the need to follow the manufacturer’s guidance.

Compare warranties and installation costs

A heater’s purchase price is only one part of the project. Gas line changes, venting, electrical upgrades, and labor can affect the total cost. Compare warranty terms as well: the Rheem RTG lists separate heat exchanger and parts warranties, and the A. O. Smith lists a limited heat exchanger warranty for residential applications. Read the full warranty terms and confirm any installation conditions that apply.

Frequently Asked Questions

What does continuous-flow water heating mean?

A continuous-flow or tankless heater warms water as it passes through the unit when you call for hot water. It does not keep a tankful of hot water stored for later use. The supply can continue while the unit has adequate fuel or power and the demand stays within its capacity.

Does a tankless heater provide unlimited hot water?

It can keep heating water on demand, but that does not mean it can serve every fixture at any flow rate. The heater has a maximum capacity, and the amount of hot water it can deliver depends in part on incoming water temperature and simultaneous household use.

Is a gas or electric model better?

Neither is best for every home. Gas models require a compatible gas supply and, for indoor units, proper venting. Electric models avoid gas but can require significant electrical capacity. Compare installation requirements and have a qualified professional check your home’s service before choosing.

Can I install one of these heaters myself?

Installation needs vary by model, but whole-home gas and high-power electric units can involve gas, venting, plumbing, or electrical work. The Rheem RTG calls for professional installation, and A. O. Smith recommends it. The ThermoMate’s electrical requirements also make a professional assessment important. Follow the product instructions and local rules.

Will the stated maximum GPM be available in cold weather?

Not necessarily. The Rheem RTG specifies its 7.0 GPM output at a 35°F temperature rise, and other models’ output can also depend on incoming water temperature. If your incoming water is cold, the heater may deliver less flow while raising the water to your desired temperature.

Can I use the ORBEK RV model in my house?

The ORBEK is presented as an RV and camper heater, with 12V DC power, propane operation, and RV opening dimensions. It is not the whole-home choice in this group. Use a residential model designed for your home’s fuel, flow needs, and installation location.

Which model is the best starting point for a multi-bath home?

For a natural-gas home, compare the A. O. Smith’s stated 8.0 GPM indoor capacity with the Rheem RTG’s 7.0 GPM outdoor design. The right fit depends on your venting options, installation location, expected simultaneous use, and incoming water temperature.

Conclusion

For a whole-home natural-gas setup, the A. O. Smith ATI-310CX3 stands out for its stated 8.0 GPM flow and scale-prevention feature, while the Rheem RTG is worth considering if outdoor installation is the better fit. The ThermoMate offers a higher stated flow than the 18kW Rheem electric model, but its electrical demands need careful review. For RV use, choose the ORBEK only after confirming its fit and connections. Before ordering any model, match its capacity to your likely simultaneous demand and have a qualified professional verify installation requirements.

Rate this post
Spread the love

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top