Product reviewHeating & Cooling

Best Hot Water Heater Gas: 5 Tankless and Tank Models Compared

Updated 11 min read

Reader-supported: when you buy through links on our site, we may earn an affiliate commission at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases. Learn more.

Choosing the best gas water heater depends on how much hot water your household uses, how your home is set up for venting, and whether you want a storage tank or on-demand heating. These five options include a 40-gallon tank heater and several tankless models, from compact residential units to a higher-capacity commercial model. Compare their stated capacity and installation needs before choosing; a licensed installer can help confirm the right size and setup for your home.

Quick Comparison

ProductTypeStated CapacityNotable Detail
Rheem RTG Series 7.0 GPMNatural gas tankless7.0 GPM; 160,000 BTUIndoor, non-condensing design
Rheem Professional Classic 40-GallonNatural gas tank40 gallons; 38,000 BTUTall atmospheric model
Rinnai RX199iNCondensing tanklessUp to 11.1 GPM; 199,000 BTUIndoor or outdoor installation options
GASLAND Gasmart ENatural gas tanklessUp to 7.6 GPM; 199,000 BTUIndoor, CSA certified
Rinnai CX199iN SENSEI CXCommercial tankless199,000 BTU; listing states up to 11.1 GPMCommercial warranty terms

Our Picks: Best Hot Water Heater Gas reviews

Rheem RTG Series: A Residential Tankless Pick for Multiple Fixtures

The Rheem RTG Series is an indoor, non-condensing tankless water heater designed for whole-home use. Its listed output is 160,000 BTU per hour, and it provides up to 7.0 GPM at a 35°F temperature rise. Rheem positions it for homes that may run two or three showers at once, though actual flow depends on incoming water temperature and how many fixtures are operating.

The wall-mounted format can free up floor space compared with a storage tank. This model also includes a digital temperature control panel, built-in freeze and flame-failure protection, and LeakGuard leak detection and prevention. Its stated UEF is 0.82. The unit is designed for indoor installation with a direct-vent system, so it is important to confirm that your home can support the required venting and gas supply.

This is a practical choice for households moving from a traditional tank to on-demand heating who want a residential-size unit with clear capacity information. Its 7.0 GPM rating is lower than the Rinnai models’ stated maximum, and the product is non-condensing rather than the higher-efficiency condensing design used by those Rinnai units. Have an installer confirm that its capacity matches your local groundwater temperature and peak hot-water needs.

Pros:

  • Stated 7.0 GPM output at a 35°F temperature rise
  • Space-saving wall-mounted design
  • Digital temperature control and built-in safety features
  • Leak detection and prevention system is included

Cons:

  • Indoor installation requires a suitable direct-vent setup
  • Lower stated maximum flow than the Rinnai tankless options

Verdict: Choose the Rheem RTG if you want an indoor natural gas tankless heater with useful safety features and a stated capacity suited to many, but not all, multi-fixture homes.

Rheem Professional Classic: A Straightforward 40-Gallon Tank Heater

Unlike the other Rheem in this guide, the Professional Classic is a storage-tank water heater. It holds 40 gallons and has a listed input of 38,000 BTU per hour. Its tall, atmospheric design follows a familiar approach: heat water in the tank and keep a supply ready for household use.

A storage tank can suit homeowners who prefer a conventional setup or are replacing a similar unit. Its capacity is straightforward to compare with an existing heater, but a 40-gallon tank does not provide the same continuous on-demand heating approach as a tankless model. Once its stored hot water is used, the tank needs time to recover.

The product information supplied for this model is limited, so check the manufacturer’s documentation and product listing for installation dimensions, venting requirements, and other details before buying. As a tall atmospheric unit, it also needs a suitable location and compatible vent arrangement. Compared with the tankless picks here, it is less compact but may be a more familiar replacement for a home already set up for a tank heater.

Pros:

  • Conventional 40-gallon storage-tank format
  • Natural gas model with a stated 38,000 BTU input
  • May be a familiar replacement style for an existing tank system

Cons:

  • Stored hot water is limited by the tank’s capacity and recovery
  • Product details supplied here do not include efficiency or warranty information

Verdict: Consider this Rheem if you want a conventional 40-gallon natural gas tank heater and your home is already set up for a compatible atmospheric model.

Rinnai RX199iN: High-Capacity Condensing Tankless Heating

The Rinnai RX199iN is a condensing tankless water heater listed at 199,000 BTU and up to 11.1 GPM. It supports natural gas or propane through its Smart Sense gas control system. Its stated UEF is 0.98, and its compact, suitcase-sized form is designed to take up less space than a standard storage tank.

The unit can be installed indoors or outdoors, but outdoor installation requires the RX-OVC vent cap. It also includes an easy-to-use interface and a Quick Flush feature intended to simplify flushing. Wi-Fi control requires a separate Controlr module, so it is not built into the listed package as described.

This model’s high stated flow and condensing design make it a strong option to consider for a large household with several hot-water demands. However, the maximum flow figure does not guarantee that every home can run seven fixtures at once; incoming water temperature and the required temperature rise affect delivered flow. Rinnai recommends professional installation. Its listed residential warranty includes a limited 15-year heat-exchanger term, five years on parts, and five years on labor when registered within 90 days of installation; otherwise, the labor term defaults to one year.

Pros:

  • Stated flow of up to 11.1 GPM and input of 199,000 BTU
  • Condensing design with a stated 0.98 UEF
  • Supports natural gas or propane
  • Indoor or outdoor installation options, with the required outdoor vent cap

Cons:

  • Professional installation is recommended
  • Wi-Fi control requires a separate module

Verdict: The RX199iN is the strongest fit here for shoppers seeking a high-capacity residential tankless unit, provided its fuel, venting, and installation needs suit the home.

GASLAND Gasmart E: An Indoor Tankless Option with a Compact Footprint

The GASLAND Gasmart E is an indoor natural gas tankless water heater rated at 199,000 BTU, with a stated maximum flow of up to 7.6 GPM. Its wall-mounted, compact format is intended to save floor space, while its on-demand design heats water as needed instead of storing a full tank.

The product information lists a UEF of 0.8 and says the unit is CSA certified. It also describes overheat, flame-out, and freeze protection. GASLAND states that the product includes a one-year replacement promise if the heater stops working within that period; check the listing and warranty terms for the exact conditions.

Its stated flow is below the Rinnai models’ listed maximum, so it may be a better match for households with moderate simultaneous hot-water use than for homes with many fixtures running at once. As with any tankless heater, actual performance depends on the incoming water temperature and the temperature rise needed. Confirm venting, gas supply, and installation requirements with a qualified professional before purchase.

Pros:

  • Compact wall-mounted indoor design
  • Stated capacity of 199,000 BTU and up to 7.6 GPM
  • CSA certification and listed safety protections
  • Product information includes a one-year replacement promise, subject to its terms

Cons:

  • Stated maximum flow is lower than the Rinnai tankless options
  • Warranty and installation details should be confirmed before buying

Verdict: Consider the Gasmart E if you want a compact indoor natural gas tankless heater and its stated flow is enough for your household’s peak demand.

Rinnai CX199iN SENSEI CX: A Commercial-Grade Tankless Choice

The Rinnai CX199iN SENSEI CX is identified as a commercial tankless water heater. Its listing states an input of 199,000 BTU and describes a condensing design with a stated UEF of 0.98. The product details also list up to 11.1 GPM, indoor or outdoor installation options, and support for natural gas or propane through Smart Sense gas control.

Like the residential RX199iN, this model includes an easy-to-use interface and Quick Flush feature. Outdoor installation requires the RX-OVC vent cap, and Wi-Fi control requires a separate Controlr module. The commercial warranty terms differ from the residential RX model: the listing describes limited heat-exchanger coverage for eight years or 12,000 hours, five years on parts, and one year on labor.

Because this is a commercial model, it may be more than a typical household needs. The supplied product details largely overlap with those for the RX199iN, so check the exact model documentation and installation requirements before treating their specifications as interchangeable. Professional installation is recommended, and the appropriate choice depends on whether the commercial model’s intended application fits your project.

Pros:

  • Commercial model with a stated 199,000 BTU input
  • Listing describes up to 11.1 GPM and a 0.98 UEF
  • Supports natural gas or propane
  • Indoor or outdoor installation options are listed

Cons:

  • Commercial design may be unnecessary for many homes
  • Outdoor venting and Wi-Fi control require separate items

Verdict: Choose the CX199iN only if a commercial model suits your application; for a typical residence, compare the residential RX199iN first.

How to Choose a Gas Water Heater

Decide Between a Tank and Tankless Design

A storage-tank heater keeps a supply of hot water ready, but that supply is limited by the tank’s capacity and recovery rate. A tankless model heats water on demand and can save floor space, but its output is limited by its flow capacity and the temperature rise required. Think about your household’s routines and whether you prefer stored hot water or continuous heating within the unit’s capacity.

Size for Peak Demand and Incoming Water Temperature

Do not choose a heater by BTU rating or maximum GPM alone. Estimate how many showers, faucets, and appliances may need hot water at the same time, then account for the temperature difference between incoming water and your desired hot-water temperature. Colder incoming water requires a larger temperature rise and can reduce a tankless heater’s available flow. Have an installer size the unit for your home and region.

Confirm Fuel Compatibility

Check whether the model is designed for natural gas, propane, or both. A heater that supports both fuels may still need the correct setup for the fuel supplied at your home. Do not assume that a conversion is simple or included; confirm compatibility and any requirements with the manufacturer and a qualified installer.

Check Venting and Installation Location

Venting requirements vary by model and installation type. The Rheem RTG is described as an indoor unit with a direct-vent system, while the Rinnai models list indoor and outdoor options with a specified vent cap required for outdoor installation. Confirm available space, vent routing, clearances, and local code requirements before ordering. Installation complexity can affect the overall project, even when the heater itself is compact.

Compare Efficiency and Condensing Design

UEF is one way to compare a water heater’s rated energy performance; a higher number indicates greater efficiency under the test method. The supplied data lists UEF values of 0.82 for the Rheem RTG, 0.98 for the Rinnai models, and 0.8 for the GASLAND. Compare the numbers alongside installation needs, expected use, and the product’s current energy documentation rather than treating efficiency as the only factor.

Review Warranty, Service, and Maintenance Needs

Read the warranty terms closely, including registration deadlines, labor coverage, and any conditions that apply. The listed Rinnai residential and commercial warranties differ, and the GASLAND listing describes a one-year replacement promise subject to its terms. Ask a qualified installer about routine service and maintenance for the model you are considering, and confirm that support is available for your location.

Check Local Rules and Professional Installation Requirements

Gas appliances need the right fuel connection, venting, and safety clearances. Local codes may set additional requirements, and some manufacturers recommend professional installation. Ask your installer to confirm that the model is permitted for your home and that the gas line and vent system can support it before you buy.

Frequently Asked Questions

Is a tankless gas water heater always better than a tank model?

No. Tankless units save space and heat water on demand, but they must be sized for the flow and temperature rise your home needs. A storage tank may be a better fit if you want a conventional replacement or your home is already set up for that type of heater.

How many showers can a 7 GPM tankless heater support?

It depends on the flow used by each shower and the temperature rise required. The Rheem RTG is listed at 7.0 GPM at a 35°F rise, but that figure does not guarantee a specific number of showers in every home. Ask an installer to calculate expected demand using your incoming water temperature.

Can I install an indoor water heater outside?

Only if the manufacturer supports that installation and the required parts and conditions are met. The Rinnai listings describe indoor or outdoor options and specify an RX-OVC vent cap for outdoor installation. Check the exact model instructions before choosing a location.

Does a higher BTU rating mean a better water heater?

Not by itself. BTU input is one part of capacity, but the right choice also depends on flow, incoming water temperature, efficiency, fuel supply, and installation requirements. A heater that is too large or too small for your needs may not be the best fit.

What is the difference between condensing and non-condensing tankless models?

These are different tankless designs, and the models in this selection list different efficiency figures and venting details. The Rheem RTG is described as non-condensing, while the Rinnai models are described as condensing. Compare each model’s installation instructions and energy information with your home’s setup.

Is the Rinnai CX199iN suitable for a typical home?

It is listed as a commercial model, so it may be more than a typical household needs. Compare it with the residential RX199iN and confirm the intended application, warranty, and installation requirements with Rinnai or a qualified installer.

Final Recommendation

For a high-capacity residential tankless option, the Rinnai RX199iN stands out on the supplied specifications, with a stated maximum flow of 11.1 GPM, 199,000 BTU input, and a 0.98 UEF. The Rheem RTG is a more moderate-flow indoor option with a useful leak-protection feature, while the Rheem Professional Classic is the conventional 40-gallon tank choice. Match the heater to your peak demand, fuel, venting, and installation conditions, and have a qualified professional confirm the fit before buying.

Rate this post
Spread the love

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top