Product reviewHeating & Cooling

Best Inline Gas Water Heater: 5 Models Compared for Every Home

Updated 11 min read

Reader-supported: when you buy through links on our site, we may earn an affiliate commission at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases. Learn more.

A gas inline water heater, also called a tankless water heater, heats water as you need it instead of storing it in a tank. The right model can save space and supply several fixtures at once, but the best fit depends on your household’s hot-water demand, incoming water temperature, gas supply, and venting setup. The five picks below range from compact non-condensing units to high-capacity condensing models with built-in recirculation.

Quick Comparison

ModelListed maximum flowType and standout featureBest suited for
Rheem RTG Series 7.0 GPM7.0 GPM at a 35°F riseNon-condensing; LeakGuard leak detectionWhole-house use with several fixtures running
GASLAND Gasmart EUp to 7.6 GPMNatural gas; 199,000 BTU; UEF 0.8Households seeking a high-capacity indoor unit
Rheem RTGH Series 8.4 GPM8.4 GPM at a 35°F riseCondensing; UEF 0.93Large households with higher simultaneous demand
Rinnai RE140iNUp to 5.3 GPMNon-condensing; service reminders and error codesSmaller households with moderate hot-water demand
Rinnai RXP160iNUp to 9 GPMCondensing; built-in recirculation pumpLarge households that value capacity and faster hot-water delivery

Our Picks: Best Inline Gas Water Heater reviews

1. Rheem RTG Series: A Balanced Whole-House Non-Condensing Pick

The Rheem RTG Series is an indoor, natural-gas, non-condensing tankless heater rated at 160,000 BTU per hour. Its listed output is 7.0 GPM at a 35°F temperature rise, which makes it a possible whole-house option for homes that may run multiple showers or other hot-water fixtures at once. Actual flow will depend on how much the incoming water needs to be heated.

A digital control panel allows temperature adjustments in 1°F increments. The unit also lists built-in freeze and flame-failure protection, plus LeakGuard leak detection and prevention. These are useful safeguards, but they do not replace correct installation, maintenance, or a suitable location and venting arrangement.

This model may suit a household that wants a straightforward wall-mounted unit and does not need the higher listed efficiency of a condensing heater. The trade-off is its 0.82 UEF, below the 0.93 listed for the Rheem RTGH and the 0.97 listed for the Rinnai RXP160iN. Its 7.0 GPM rating is also tied to a 35°F rise, so colder incoming water can reduce the flow available at a useful hot-water temperature.

Pros:

  • Listed at 7.0 GPM with a 35°F temperature rise
  • Digital temperature control adjusts in 1°F increments
  • Includes LeakGuard leak detection and freeze protection
  • Wall-mounted design frees up floor space

Cons:

  • Its 0.82 UEF is lower than the condensing models in this guide
  • Requires an indoor direct-vent installation and suitable natural-gas service

Verdict: Choose the Rheem RTG if its 7.0 GPM rating fits your demand and you prefer a non-condensing unit with listed leak detection; compare the condensing options if efficiency is your main priority.

2. GASLAND Gasmart E: High Capacity for Busy Homes

The GASLAND Gasmart E is an indoor natural-gas tankless water heater with a listed maximum output of 199,000 BTU and flow of up to 7.6 GPM. It is intended for whole-house hot water, and its compact, wall-mounted form can be useful where floor space is limited. GASLAND lists a UEF of 0.8 and CSA certification.

Its capacity puts it in the running for households with several hot-water needs, but the 7.6 GPM figure does not include a temperature-rise condition in the supplied specifications. That makes it harder to compare directly with models that state flow at a specific rise. Ask an installer to check performance against your local incoming-water temperature and the number of fixtures you expect to use together.

The manufacturer lists overheat, flame-out, and freeze protection, along with U.S.-based customer support and a one-year replacement promise if the heater stops working within that period. Those terms should be checked against the product’s current warranty details before purchase. Compared with the Rheem RTGH and Rinnai RXP160iN, its listed UEF is lower, though it may still appeal if its capacity and installation requirements suit your home.

Pros:

  • Up to 7.6 GPM and 199,000 BTU listed
  • Compact wall-mounted design
  • CSA certified, with several listed safety protections
  • Manufacturer lists U.S.-based support

Cons:

  • Supplied flow rating does not specify a temperature rise
  • Its listed 0.8 UEF is below the condensing models in this guide

Verdict: Consider the GASLAND Gasmart E for a high-capacity natural-gas setup, but confirm its flow at your required temperature rise and verify warranty terms before buying.

3. Rheem RTGH Series: Efficient Output for Larger Households

The Rheem RTGH Series is an indoor, natural-gas condensing tankless heater rated at 157,000 BTU per hour. Its listed flow is 8.4 GPM at a 35°F rise, giving it a higher stated flow than the Rheem RTG at the same temperature rise. Rheem positions it for larger households and multiple bathrooms.

Condensing technology helps this model reach a listed 0.93 UEF. It also includes a digital LED control with 1°F adjustments, freeze protection, and a multi-point safety system. The product details list CSA certification, low-NOx compliance, and a 15-year heat-exchanger warranty with a five-year parts warranty. Review the full warranty conditions and installation requirements before choosing it.

The higher flow and efficiency make this a stronger fit than the non-condensing Rheem for homes with greater demand, provided the gas supply and installation setup are suitable. Its 8.4 GPM figure is still based on a 35°F rise; a larger temperature rise can reduce available flow. Professional installation is recommended, and condensing units may require different venting and condensate arrangements than non-condensing models.

Pros:

  • Listed at 8.4 GPM at a 35°F rise
  • Condensing design with a listed 0.93 UEF
  • Temperature control adjusts in 1°F increments
  • Includes a listed 15-year heat-exchanger warranty and five-year parts warranty

Cons:

  • Professional installation is recommended
  • Venting and condensate needs should be assessed before purchase

Verdict: The Rheem RTGH is a compelling choice for a larger household seeking higher listed flow and better efficiency than the non-condensing Rheem RTG.

4. Rinnai RE140iN: A Compact Option for Moderate Demand

The Rinnai RE140iN is a non-condensing natural-gas tankless heater rated at 140,000 BTU, with a listed maximum flow of 5.3 GPM. Its compact, suitcase-sized design can suit a home where space is tight and hot-water demand is moderate. The lower flow rating makes it a less natural fit for households that regularly need several showers and appliances running at the same time.

Its LED screen displays service reminders and error codes, which can make routine upkeep and troubleshooting easier to follow. The product details also describe a cleaner internal layout intended to support serviceability. Rinnai recommends professional installation and provides guidance for matching a model to local groundwater temperatures.

There is an important detail to verify before ordering: the supplied product description calls this model an outdoor heater, while the model title does not specify installation location. Confirm the exact model’s indoor or outdoor rating, venting requirements, and installation instructions with Rinnai or a qualified installer. The listed warranty terms include a 15-year heat-exchanger warranty, five years for parts, and five years for labor, subject to registration requirements described by the manufacturer.

Pros:

  • Compact design for homes with limited installation space
  • Listed flow of up to 5.3 GPM
  • LED screen provides service reminders and error codes
  • Manufacturer lists heat-exchanger, parts, and labor warranty coverage

Cons:

  • Lower listed flow than the other whole-house models here
  • Installation-location details should be confirmed because the supplied description is unclear

Verdict: Choose the RE140iN only if its 5.3 GPM capacity suits your household and you have confirmed the exact installation location and venting requirements.

5. Rinnai RXP160iN: High Flow with Built-In Recirculation

The Rinnai RXP160iN is a 160,000 BTU condensing tankless heater with a listed maximum flow of 9 GPM. Its Smart Sense system is described as compatible with natural gas or propane, and the unit can be installed indoors or outdoors when configured with the required vent parts. Confirm the fuel and installation setup for your specific home before ordering.

Its standout feature is an internal recirculation pump with Smart-Circ technology. The system is designed to learn water-use patterns and schedule recirculation, which may help reduce the wait for hot water at fixtures. The model also lists a UEF of 0.97, a Quick Flush feature, and a user interface. Wi-Fi control requires a separate Controlr module, according to the supplied product details.

The RXP160iN has the highest listed flow and UEF among these picks, making it a strong candidate for a large household that wants both high capacity and built-in recirculation. Its more advanced features may be unnecessary for a smaller home, and recirculation performance depends on the home’s plumbing and setup. Professional installation is recommended. The listed warranty includes 15 years for the heat exchanger and five years for parts and labor, subject to the manufacturer’s registration terms.

Pros:

  • Highest listed flow in this group at up to 9 GPM
  • Built-in pump and Smart-Circ recirculation scheduling
  • Listed UEF of 0.97
  • Supports natural gas or propane and indoor or outdoor installation with the required setup

Cons:

  • Wi-Fi control requires a separate module
  • Professional installation and proper vent configuration are important

Verdict: The Rinnai RXP160iN is the most feature-rich choice here for a high-demand home that can benefit from recirculation and its higher listed efficiency.

How to Choose an Inline Gas Water Heater

Match Flow Rate to Your Household’s Peak Demand

Start by estimating which hot-water fixtures might run at the same time, such as showers, a dishwasher, or a washing machine. Add their approximate flow needs, then compare that demand with a heater’s capacity. A listed maximum GPM is not a guarantee that the unit will deliver that flow under every condition, so use the manufacturer’s performance chart and ask an installer to confirm the match.

Account for Incoming Water Temperature

A heater must raise incoming water to your chosen temperature. The colder the incoming water, the greater the temperature rise required and the less hot-water flow a unit may provide. This is why the Rheem models’ listed GPM figures include a 35°F rise, while some other listings do not provide a temperature-rise condition. Check the groundwater temperature for your area and size the heater for the coldest conditions you expect.

Choose Between Condensing and Non-Condensing Designs

Condensing models, such as the Rheem RTGH and Rinnai RXP160iN, have higher listed UEF values than the non-condensing picks in this guide. They may need specific venting and condensate handling, so installation details matter. Non-condensing models can be a suitable alternative, but compare their efficiency, venting instructions, and total installation needs rather than choosing on the unit’s size alone.

Confirm Fuel Type and Gas Supply

Check whether the model is designed for natural gas, propane, or both. Do not assume a unit can use a different fuel without the required configuration. The gas line and supply must also support the heater’s demand. A qualified installer can assess the existing line, connection, and any changes needed before you buy.

Check Installation Location and Venting

Tankless heaters need a location and vent setup that meet the model’s instructions and local code. Indoor units require appropriate venting, while outdoor-rated models have different placement requirements. Product listings can be unclear, so confirm the exact model number, approved location, clearances, and vent parts with the manufacturer or installer before ordering.

Consider Recirculation and Hot-Water Wait Time

A recirculation system can help reduce the wait for hot water, especially in homes where fixtures are far from the heater. The Rinnai RXP160iN includes an internal pump and Smart-Circ scheduling. Results depend on the plumbing layout and installation, and recirculation is not essential for every household. Consider whether convenience at distant fixtures is worth the added system complexity.

Review Efficiency, Warranty, and Service Needs

Compare the listed UEF figures, but consider them alongside the expected hot-water demand and installation requirements. Read the full warranty terms, including registration rules and coverage for parts, labor, and the heat exchanger. Ask how often the unit needs maintenance and whether qualified service is available in your area. A tankless heater still needs appropriate care to support reliable operation.

Plan for Professional Installation

Gas, venting, electrical connections, condensate drainage, and local code requirements make installation more involved than simply mounting a unit. Several products in this guide recommend professional installation. Get an assessment from a qualified installer before purchase so you can confirm compatibility and avoid choosing a model that needs costly changes to your home.

Frequently Asked Questions

What is an inline gas water heater?

An inline gas water heater, commonly called a tankless water heater, heats water as it passes through the unit. It does not store a full tank of hot water, so its ability to supply several fixtures at once depends on its capacity and the temperature rise required.

How many gallons per minute do I need?

That depends on the fixtures you expect to use at the same time and the incoming water temperature. Estimate peak simultaneous demand, then compare it with the manufacturer’s flow data at the temperature rise your home needs. A qualified installer can help confirm the right size.

Does a higher GPM rating always mean better performance?

No. Flow ratings can be measured at different temperature rises, which makes direct comparisons difficult. A heater may deliver less flow when it has to raise colder water by more degrees. Look for the temperature-rise condition behind the rating, not just the largest GPM number.

Are condensing tankless heaters more efficient?

The condensing models in this guide have higher listed UEF values than the non-condensing models. However, the installation requirements differ, and the best choice also depends on your household’s demand, venting options, fuel supply, and installation costs.

Can I install a gas tankless water heater myself?

Professional installation is recommended for several models listed here. Gas connections, venting, condensate handling, and local codes must all be addressed. Have a qualified installer confirm that the heater and home setup are compatible.

Will a tankless heater provide endless hot water?

It can continue heating water while it has an adequate gas supply and the demand stays within its capacity. If too many fixtures run at once, the unit may not provide the flow or temperature you want. “Endless” does not mean unlimited flow.

What should I verify before buying a specific model?

Confirm the fuel type, indoor or outdoor rating, venting parts, maximum flow at your required temperature rise, warranty terms, and local installation requirements. For the Rinnai RE140iN in this guide, the supplied product details are unclear about installation location, so verify that point with the manufacturer or an installer.

Final Recommendation

For a high-demand home that wants strong listed flow, high efficiency, and built-in recirculation, the Rinnai RXP160iN is the most feature-rich option in this group. The Rheem RTGH is a strong alternative if you want a condensing unit with a clearly stated 8.4 GPM rating at a 35°F rise. For a simpler non-condensing setup, consider the Rheem RTG, while checking that its capacity matches your peak demand. In every case, have a qualified installer verify sizing, fuel, venting, and local code requirements before you buy.

Rate this post
Spread the love

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top