How-to guideCleaning & Laundry

How To Clean A Washing Machine Step By Step

Updated 8 min read

Reader-supported: when you buy through links on our site, we may earn an affiliate commission at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases. Learn more.

Your washing machine cleans your clothes, but it doesn’t clean itself. Detergent residue, lint, body oils, and trapped moisture can build up inside the drum and seals, leaving clothes musty and the machine smelling unpleasant. The good news is that cleaning a washing machine usually takes less than an hour, and a few simple habits can help keep odors and grime from coming back.

Why You Should Clean Your Washing Machine

Every wash leaves a little behind. Detergent and fabric softener can cling to the drum, dispenser, and hoses, while lint and dirt collect in places you can’t easily see. In a front-loading machine, moisture can also linger in the rubber door gasket. These damp, soapy areas may develop mildew and unpleasant smells.

A dirty washer can transfer odors or residue to clean laundry. Cleaning it won’t fix every problem—persistent smells can also point to a clogged drain or plumbing issue—but it’s a sensible first step. Regular care can also help your washer drain and rinse as intended.

What You’ll Need

Gather a few supplies before you start. Your machine’s owner’s manual is especially useful because washer designs and cleaning instructions vary.

  • A washer cleaner approved for your machine, or the cleaning product specified in the manual
  • A soft cloth or sponge
  • A soft toothbrush or small cleaning brush
  • Warm water and a small amount of mild dish soap for removable parts
  • Towels, especially if you’re checking a drain filter

Don’t mix cleaning products. In particular, never combine chlorine bleach with vinegar, ammonia, or another cleaner, because the mixture can create dangerous fumes. If you use a product, follow its label and your washer manufacturer’s instructions.

How to Clean a Washing Machine Step by Step

1. Check the Manual and Empty the Washer

Take out any clothes, then check the manual for a washer-cleaning cycle and specific product recommendations. Some machines have a cycle called “Clean Washer,” “Tub Clean,” or something similar. The name and instructions differ by model, so follow the directions for yours rather than guessing.

If your machine has a dedicated cleaning cycle, use it as directed. If it doesn’t, the manual may recommend a hot, empty cycle. Don’t add detergent unless the instructions call for it; regular laundry detergent can create excess suds during a cleaning cycle.

2. Clean the Detergent Dispenser

Pull out the detergent drawer if it’s designed to be removed. Check the manual if you’re unsure how; forcing it can break a catch or clip. Rinse removable sections with warm water and use a soft brush to loosen sticky detergent and softener residue.

For stubborn buildup, let the drawer parts soak in warm, soapy water for a few minutes. Wipe the space the drawer slides into, too. Residue often collects on the top and sides of that cavity, where water from a quick rinse may not reach.

Rinse the parts well, dry them, and put them back. Leaving them wet or coated in soap can allow residue to build up again.

3. Clean the Drum

Run the washer’s cleaning cycle with the washer cleaner recommended in your manual. Use the product amount and placement stated on its label. Some cleaners go directly into the drum; others belong in the dispenser. The right method depends on the product and machine.

If your manual doesn’t call for a dedicated cleaner, follow its instructions for an empty cleaning cycle. Avoid adding vinegar, bleach, or other household products unless the manufacturer specifically allows them. Repeated or incorrect use can damage some washer parts, and bleach must never be mixed with vinegar or other cleaners.

When the cycle ends, wipe the inside of the drum with a clean cloth. If you still see visible residue, wipe it away rather than scraping the drum with anything abrasive.

4. Clean the Rubber Gasket on a Front-Load Washer

Front-load washers have a flexible rubber seal around the door. Gently pull back the folds and look for lint, hair, coins, or other debris. Remove loose items by hand, then wipe the gasket with a damp cloth and a little mild soapy water.

Pay attention to the bottom of the seal, where water and small items can collect. Use a soft brush for grime, but don’t scrub hard or stretch the rubber. Rinse away soap with a clean damp cloth, then dry the folds thoroughly. If you spot a tear or the gasket has a persistent strong odor, check your manual or contact the manufacturer for advice.

5. Wipe the Door and Exterior

Clean both sides of the door and the area around the opening with a damp cloth. For glass, use a suitable household glass cleaner on the cloth rather than spraying it into the machine. Wipe the control panel and exterior with a soft, barely damp cloth, and avoid soaking buttons, seams, or electrical areas.

This quick wipe removes detergent splashes and fingerprints before they become sticky. It also gives you a chance to notice leaks, cracks, or residue around the door.

6. Check the Drain Pump Filter If Your Washer Has One

Some front-load washers have a small drain-pump filter behind a lower access panel. It can catch coins, buttons, and lint, but not every washer has a filter that owners can clean. Check the manual before opening anything.

If yours does have an owner-accessible filter, unplug the washer first and follow the manual’s steps. Put towels and a shallow container beneath the access point because water may spill out. Open it slowly, remove trapped debris, and reinstall the filter firmly. If you’re unsure how to do this, skip the step and ask the manufacturer or a qualified repair professional.

7. Run an Extra Rinse If Needed, Then Dry the Washer

If your manual or cleaner’s instructions recommend a rinse cycle, run one to clear any remaining product. When the machine is finished, wipe away leftover water around the drum, door, and gasket.

Leave the door open or slightly ajar and pull the dispenser drawer open enough to let air circulate, as long as that’s safe in your home. Drying the interior matters because trapped moisture is one of the main reasons odors return.

Cleaning a Front-Load vs. Top-Load Washer

The basic process is similar, but the design affects where grime tends to collect. Use this as a guide, then check your manual for model-specific directions.

Washer typeAreas to checkHelpful cleaning habit
Front-loadRubber door gasket, door glass, detergent drawer, and possibly a drain-pump filterWipe the gasket dry and leave the door ajar after use when practical
Top-loadDrum, dispenser, lid, and the area beneath or around removable dispensersWipe splashes from the lid and dispenser, and leave the lid open to dry when safe

How Often Should You Clean a Washing Machine?

For many households, cleaning the washer about once a month is a useful starting point. Your manual may suggest a different schedule, and you may need to clean more often if you wash heavily soiled clothes, use a lot of fabric softener, or notice odors. If you do laundry infrequently, don’t assume the machine stays clean; water and residue can still remain in the seals and dispenser.

Small habits between deep cleans make a real difference:

  • Use the detergent type and amount recommended for your washer. Too much detergent can leave residue, especially in a high-efficiency machine.
  • Remove wet laundry promptly so moisture doesn’t sit in the drum.
  • Wipe the door seal and leave the door or lid ajar when practical.
  • Clean spills from the dispenser before they harden.
  • Use the washer’s cleaning reminder or cycle if your model has one.

Common Mistakes to Avoid

Using Too Much Detergent

More detergent doesn’t necessarily mean cleaner clothes. Excess soap can leave a film inside the washer and create extra suds, especially in high-efficiency machines. Measure detergent according to its label and your washer’s instructions, and consider whether your load size actually needs a full dose.

Mixing Cleaning Products

Don’t combine bleach with vinegar, ammonia, or other cleaners. The reaction can release harmful fumes. Use one approved product at a time, follow its label, and never add extra chemicals to a cycle that already contains a cleaner.

Scrubbing Seals with Abrasive Tools

Steel wool, scouring pads, and sharp tools can scratch surfaces or damage a rubber gasket. A soft cloth and brush are usually enough. If a stain won’t come off with gentle cleaning, check the manual rather than escalating to a harsher product.

Closing the Door While the Washer Is Still Damp

A closed, wet washer gives moisture nowhere to go. Letting the interior air out after use helps slow the return of musty smells. If you have children or pets, leave the door open only when it’s safe and follow any safety guidance supplied with your machine.

What to Do If the Washer Still Smells

If the smell remains after cleaning, check whether the gasket folds, dispenser cavity, or accessible filter still contains debris. Make sure the washer drains fully and that you’re not leaving wet laundry inside for long periods.

A recurring sewer-like smell, standing water, leaks, or a washer that won’t drain may signal a plumbing or mechanical problem rather than ordinary residue. Don’t dismantle the machine to investigate. Check the manual’s troubleshooting section or contact a qualified technician.

Read more related posts:

Frequently Asked Questions

Can I use vinegar to clean my washing machine?

Check your washer manual first. Some manufacturers advise against vinegar because it may affect certain materials over time. Never combine vinegar with bleach or another cleaner.

Can I use bleach to clean a washer?

Only if your washer manual allows it, and only as directed. Use the specified amount and dispenser, if applicable. Never mix bleach with vinegar, ammonia, or other cleaning products.

Why does my washing machine smell even after I clean it?

Odors can return if moisture remains in the gasket or drum, detergent residue is still present, or a filter or drain has trapped debris. A persistent sewer-like smell or standing water may need professional attention.

Should I leave the washer door open after every wash?

Leaving it slightly ajar helps the interior dry, particularly on a front-loader. Do this when it’s safe in your home, and follow any child-safety guidance for your machine.

Conclusion

To clean a washing machine, empty it, clean the dispenser and any accessible seals, run the manufacturer-approved cleaning cycle, and dry the areas where moisture collects. Use the manual as your guide, avoid mixing products, and clean the washer regularly. A few minutes of care after laundry day can help keep the machine fresher and your clothes smelling clean.

Rate this post
Spread the love

Sponsored

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top