A propane, or LP, tankless water heater heats water as you need it instead of storing a full tank. The right model depends on how many fixtures you use at once, how cold your incoming water is, and whether your home can support the unit’s venting and gas requirements. Below, we compare five indoor propane models, including their stated flow rates, controls, safety features, and practical trade-offs.
Specifications and performance figures below come from the supplied product information. Actual hot-water flow depends on conditions such as incoming water temperature and the temperature you set.
Table of Contents
Quick Comparison
| Product | Stated flow | Notable features | Best for |
|---|---|---|---|
| APUS 95,000 BTU Propane Tankless Water Heater | 4.42 GPM | Low-flow start, LED touchscreen, freeze protection | Homes seeking steady output for several fixtures |
| CAMPLUX CA360W Indoor Propane Water Heater | 3.6 GPM; up to 4 GPM | Preset temperature modes, CSA certification, altitude compensation | Households wanting family-oriented temperature presets |
| Forimo 4.74 GPM Indoor Propane Water Heater | 4.74 GPM | 123,000 BTU, digital display, multiple safety protections | Buyers prioritizing a high stated flow rate |
| CAMPLUX CA318 Indoor Propane Water Heater | 3.18 GPM | Temperature control within ±2°F, compact design | Smaller homes and modest hot-water demand |
| CAMPLUX CX360 Propane Tankless Water Heater | 3.6 GPM | Temperature control within ±1°F, freeze and flame-out protection | Compact installations with several safety features |
Our Picks: Best Lp Tankless Water Heater reviews
1. APUS 95,000 BTU: Best for Low-Flow Starts and Multiple Fixtures
The APUS is an indoor propane tankless heater with a stated 95,000 BTU output and 4.42 GPM maximum flow. Its 0.66 GPM low-flow start is a useful detail for households where a faucet or shower may run at a lower flow. The product information says it is designed to serve two showers and a sink at the same time, though actual performance will depend on inlet-water temperature and demand.
The heater has an LED touchscreen and a listed temperature range of 95°F to 140°F. APUS also claims temperature control within ±1°F, up to 98% thermal efficiency, and a 0.81 UEF. Treat these as manufacturer-stated figures rather than guaranteed results in every installation. Its compact listed dimensions—20.55 inches high, 13.27 inches wide, and 5.91 inches deep—may help when wall space is limited.
This model includes multiple safety protections and automatic freeze protection, but the product details still advise draining the unit when it will sit unused in freezing conditions. That is an important limitation for cabins or seasonal homes: built-in protection should not be treated as a substitute for proper winterizing. The unit also requires a standard 120V AC connection.
Pros:
- High stated flow rate for a compact indoor unit
- Low-flow start may suit faucets and lower-flow fixtures
- Adjustable temperature range and touchscreen controls
- Built-in freeze protection and multiple safety features
Cons:
- Freeze protection does not remove the need to drain the unit when appropriate
- Efficiency and multi-fixture performance claims depend on installation and operating conditions
Verdict: Choose the APUS if its low-flow start, compact dimensions, and stated multi-fixture capacity match your needs, but plan for correct venting, power, and freeze protection.
2. CAMPLUX CA360W: Best for Temperature Presets and Family Use
The CAMPLUX CA360W is an indoor model rated at 3.6 GPM and 85,300 BTU, with a stated maximum of 4 GPM and 98,500 BTU. Its product details qualify the maximum-flow figure with a specific example: 105°F water at 2 GPM per outlet with 65°F incoming water. This makes it especially important to compare expected flow with your home’s incoming water temperature rather than relying on the top-line number alone.
A standout feature is its set of one-touch temperature modes for uses such as bathing and dishwashing. The unit also has a digital display, propane flow monitoring, and claimed temperature accuracy within ±1°F. It is listed as CSA-certified and includes freeze, flame-failure, and overheating safeguards. Built-in altitude compensation is specified as optimal below 2,000 feet.
The CA360W measures 23.86 inches high, 13.78 inches wide, and 6.69 inches deep. It uses 3/4-inch NPT water connections and a 1/2-inch gas connection, and the product information lists a UL-listed plug. The maker describes installation as straightforward, but indoor gas-heater installation still needs proper venting and must meet local requirements. Its stated 0.93 UEF and savings figures are manufacturer claims, not a promise of household savings.
Pros:
- Preset temperature modes simplify common household uses
- CSA certification is stated in the product information
- Includes several safety protections and altitude compensation
- Provides clearly listed water and gas connection sizes
Cons:
- The maximum flow figure is tied to stated water-temperature conditions
- Its larger listed dimensions may not suit every tight installation space
Verdict: The CA360W is a good fit if you value preset temperatures and clearly specified safety features, provided its flow and installation requirements suit your home.
3. Forimo 4.74 GPM: Best for a High Stated Flow Rate
This Forimo indoor heater is listed at 4.74 GPM and up to 123,000 BTU per hour, making it the highest-flow option in this comparison by its stated maximum. The supplied information says it is intended to provide hot water to two or three points at once. As with any tankless unit, the maximum flow alone does not tell you how much hot water it can deliver at your required temperature rise.
The design includes a stainless-steel exterior, an oxygen-free copper water component, and an LED digital display for temperature adjustment. It requires a minimum water pressure of 0.2 MPa, with a stated operating range of 0.2 to 0.8 MPa. Connections are listed as 1/2-inch NPT for water and gas, and the product information specifies a 2.3-inch exhaust vent.
The heater is described as LPG-only, so do not assume it can run on natural gas or be converted without explicit manufacturer approval. Flame-failure, anti-freezing, and overheating protection are listed. The instructions also call for proper ventilation and a dedicated exhaust pipe to carry combustion gases outdoors. For a home installation, confirm venting, gas supply, and local code requirements with a qualified professional.
Pros:
- Highest stated maximum flow in this group
- Lists water-pressure requirements and connection sizes
- Digital temperature adjustment and several safety protections
- Product information identifies the fuel as propane only
Cons:
- Does not list a temperature-accuracy figure or efficiency rating in the supplied details
- Requires careful planning for its dedicated exhaust vent and minimum water pressure
Verdict: Consider the Forimo if you need a high stated flow rate and can verify its pressure, venting, and LPG requirements before purchase.
4. CAMPLUX CA318: Best for Smaller Hot-Water Needs
The CAMPLUX CA318 is a compact indoor propane heater with a stated 3.18 GPM flow rate. The manufacturer says it can supply two or three points at once, but its lower listed flow compared with the other models makes it a better match for modest demand than for several high-flow fixtures running together.
Its product details describe temperature control within ±2°F, an oxygen-free copper heat exchanger, and a stainless-steel burner. The stated water connections are G 1/2 inch, and the heater comes with a 2.3-inch horizontal vent pipe. CAMPLUX notes that a gas regulator and a particular connector may be needed when connecting to propane tanks, so confirm the exact connection parts for your setup before installation.
The compact format may appeal to a small home, cabin, or apartment with limited wall space. Still, the supplied information does not provide dimensions, an efficiency rating, or a list of freeze protections for this model. Do not assume it has features that are not specified; check the installation manual and confirm winterization needs for your location.
Pros:
- Lower stated flow may suit smaller households and limited demand
- Temperature control is specified within ±2°F
- Includes a horizontal vent pipe
- Uses an oxygen-free copper heat exchanger and stainless-steel burner
Cons:
- Lower stated flow than the other models in this comparison
- Supplied details do not list dimensions, efficiency, or freeze protection
Verdict: Choose the CA318 only if its 3.18 GPM rating fits your expected demand and you have confirmed the required gas fittings and winter protection.
5. CAMPLUX CX360: Best for Compact Design and Listed Safety Features
The CAMPLUX CX360 is rated at 3.6 GPM and 82,000 BTU. The product information describes it as suitable for two or three fixtures at once. At 21.3 inches high, 13.7 inches wide, and 6.8 inches deep, it has a compact wall-mounted format for a smaller home or installation area.
The maker states that the unit controls temperature within ±1°F and uses an oxygen-free copper heat exchanger. Listed protections include freeze, flame-out, overheating, over-temperature, pipe-blockage, high-temperature lock, and power-off memory features. The product details say freeze protection activates below 39°F; for a seasonal or exposed installation, confirm the manual’s winterizing instructions rather than relying on that feature alone.
Connection specifications include 3/4-inch NPT water fittings, a 1/2-inch NPT gas inlet, a 3-inch vent outlet, and a UL-approved 120V plug. CAMPLUX lists a compatible vent kit and an optional wall thimble. The stated efficiency is 96.9%, but installation conditions and use affect real-world performance. Check accessory compatibility and local venting rules before choosing this unit.
Pros:
- Compact dimensions for installations with limited space
- Temperature control is specified within ±1°F
- Detailed list of safety protections
- Connection sizes and electrical requirements are stated
Cons:
- Its 3.6 GPM rating is lower than the top-flow models here
- May require compatible venting accessories for your installation
Verdict: The CX360 is a sensible option if you want a compact unit with a detailed list of safeguards and its 3.6 GPM output meets your household’s needs.
How to Choose the Best LP Tankless Water Heater
Size the heater for your actual flow needs
Start by listing the fixtures you may use at the same time, such as a shower, sink, or dishwasher. Add their expected flow rates to estimate your household’s peak demand. Then compare that estimate with the heater’s rated flow. A product’s maximum GPM is not a guarantee of that flow at every temperature, so check the conditions behind the rating.
Account for incoming water temperature
A tankless heater must raise incoming water to your selected temperature. Colder source water requires a larger temperature rise, which can reduce the flow the unit can deliver at a comfortable temperature. If your water is cold during part of the year, choose based on that colder condition instead of relying only on a best-case rating.
Confirm that the unit is made for your fuel
These models are listed for propane or LPG. Check the product label and installation instructions to confirm the fuel type and required gas pressure, regulator, and fittings. Do not connect a propane-only heater to natural gas or assume a conversion is allowed unless the manufacturer specifically approves it.
Plan for indoor venting and safe installation
An indoor gas water heater needs a suitable exhaust path to carry combustion gases outdoors. Vent size, vent materials, clearances, and location matter. Follow the manufacturer’s installation instructions and local building and fuel-gas codes, and use a qualified installer when required. Never treat a simple connection description as proof that a unit is suitable for a particular space.
Check water, gas, and electrical connections
Compare the heater’s water and gas connection sizes with your existing plumbing and supply. Some models also require a 120V electrical connection for controls or operation. Check the supplied details and manual for the exact requirements, and account for any required regulator, vent kit, valves, or approved connectors before you buy.
Consider freeze protection and seasonal use
Built-in freeze protection can help, but it does not remove the need to follow the manufacturer’s instructions in freezing weather. Power loss, exposure, or long periods without use may affect protection. If the heater is in a cabin, garage, or other space that may get cold, confirm whether it must be drained and how to winterize it.
Compare temperature controls and safety features
Look for a clear temperature display, an adjustment range that meets your needs, and protections such as flame-failure or overheating shutoff. Preset modes may make common tasks easier, while stated temperature accuracy can help you compare models. These features do not replace correct setup or careful temperature selection.
Check dimensions and accessory compatibility
Measure the wall area and allow for the clearances and vent routing required by the manual. A compact unit still needs enough room for safe installation and future service. Check whether the vent kit, wall thimble, or connection accessories are included or sold separately, and verify that any accessory is approved for the exact model.
Frequently Asked Questions
What does LP mean on a tankless water heater?
LP means liquefied petroleum gas, commonly called propane. Confirm that the heater is designed for your fuel and that its gas supply, regulator, and fittings meet the installation instructions.
How many fixtures can an LP tankless water heater run at once?
It depends on the heater’s usable flow at your required temperature rise and the combined flow of the fixtures. Product descriptions may state that a model can serve two or three points, but colder incoming water or higher-flow fixtures can change what is practical.
Is a higher GPM rating always the better choice?
No. A higher stated flow can be helpful, but it should match your real demand and the temperature rise needed at your home. Also check gas supply, water pressure, venting, and the conditions used for the advertised rating.
Can I install an indoor propane tankless water heater myself?
Indoor gas-heater installation involves fuel connections and venting combustion gases outdoors. Requirements vary by location, so follow the manufacturer’s instructions and local code. Use a qualified professional when required or when you are unsure about the work.
Does freeze protection mean I do not need to drain the heater?
Not necessarily. Freeze-protection features can reduce risk, but some product instructions still call for draining the unit when it will be unused in cold conditions. Follow the exact model’s winterizing guidance.
Do all propane tankless water heaters need electricity?
No single answer applies to every model. Some products list a 120V plug, while the supplied details for others do not specify their electrical needs. Check the installation manual for the exact unit before planning the installation.
Final Recommendation
For a balance of stated flow, low-flow starting, compact dimensions, and adjustable controls, the APUS is the strongest all-around option in this group based on the supplied specifications. The CAMPLUX CA360W stands out for preset temperature modes and stated certification, while the Forimo has the highest listed maximum flow. Before choosing any model, confirm its output under your incoming-water conditions and verify fuel, venting, electrical, and freeze-protection requirements for your home.