Finding the best sliding door handle starts with measuring your door—not choosing a style. Mounting-hole spacing, door thickness, and lock type all affect fit. The options below cover common 3-15/16-inch mounting patterns as well as a narrower, thicker-door setup, with differences in finish and included hardware worth checking before you buy.
Table of Contents
Quick Comparison
| Product | Mounting-hole spacing | Door thickness | Mortise lock included? | Standout detail |
|---|---|---|---|---|
| HauSun Handle Set with Mortise Lock | 3-15/16 in | Not specified | Yes | Includes a 45° mortise lock |
| TPard Oak Wood Handle Set | 3-15/16 in | 1-3/8 to 1-3/4 in | No | Oak interior handle |
| HILLMASTER Reversible Handle Set | 3-15/16 in | 1-1/4 to 1-3/4 in | No | Four screw lengths included |
| SANKINS White Diecast Handle Set | 3-15/16 in | 1-1/2 to 1-3/4 in | No | Reversible handle with several screw lengths |
| Zinkitool Black Diecast Handle Set | 6-5/8 in | 1 to 1-1/8 in | Not specified | Black finish and keeper included |
Our Picks: Best Mm Sliding Door Handle reviews
HauSun Handle Set: Best Pick With a Mortise Lock Included
The HauSun kit is a practical choice if you need to replace both the handles and the mortise-style latch. It includes an interior handle, an exterior pull, a thumb latch, the mortise lock, and screws in three lengths. That makes it the most complete package here for a door that needs a new latch as well as new handles.
The handle is reversible for left- or right-handed doors, and the stated mounting-hole spacing is 3-15/16 inches. The included lock is described as a 45-degree mortise latch for wood, aluminum, and vinyl sliding patio doors. The exterior pull is non-keyed, though, and the listing says it cannot be converted to work with a key.
Measure your existing holes and compare your latch to the product details before ordering. The listed screw lengths offer some flexibility, but the supplied information does not give a supported door-thickness range. This is a stronger fit when you need the lock included than the TPard, HILLMASTER, or SANKINS sets, which do not include a mortise lock.
Pros:
- Includes a 45-degree mortise lock, thumb latch, and both handles
- Reversible for left- or right-hand doors
- Three screw lengths are included
- Designed for a common 3-15/16-inch mounting pattern
Cons:
- Exterior pull is non-keyed and not convertible to a keyed version
- Door-thickness range is not stated in the supplied product details
Verdict: Choose the HauSun if your door uses the listed hole spacing and you want a replacement mortise lock in the same kit.
TPard Oak Wood Handle Set: A Warm-Looking Replacement
The TPard set stands out for its light oak interior handle paired with a white-painted zinc diecast exterior pull. It offers a more wood-forward look than the all-diecast options, which may suit a door or room where a plain metal handle feels out of place.
It is made for a 3-15/16-inch mounting-hole spacing and door thicknesses from 1-3/8 to 1-3/4 inches. The non-handed design can be reversed for a left- or right-hand door. The package includes a thumb latch, instructions, and three pairs of screws in different lengths.
This set is intended for a mortise or hook-style door, but the mortise lock itself is not included. The exterior pull is also non-keyed. The listed compatibility names several door makers, but matching the hole spacing and checking your existing latch style are still important before purchase.
Pros:
- Oak interior handle offers a different look from metal-only sets
- Fits the stated 3-15/16-inch hole spacing
- Listed for door thicknesses from 1-3/8 to 1-3/4 inches
- Includes three pairs of screws and installation instructions
Cons:
- Mortise lock is not included
- Exterior pull is non-keyed
Verdict: Pick the TPard if you want an oak interior handle and your existing mortise lock is usable or will be replaced separately.
HILLMASTER Reversible Set: Best for a Broad Thickness Range
HILLMASTER offers a white die-cast handle set for mortise-style sliding doors. Its key fit details are a 3-15/16-inch hole spacing and a stated door-thickness range of 1-1/4 to 1-3/4 inches. That range starts thinner than the TPard and SANKINS options, so it may be worth considering if your door is near the lower end of those products’ fit limits.
The set includes an interior handle, an exterior pull, a thumb latch lever, and eight screws in four lengths. Its non-handed design can be used on either left- or right-hand doors. The exterior pull is non-keyed, and a mortise lock is not listed among the included pieces.
Check that your door uses a mortise hook-style lock and that the existing mounting holes are on the stated centers. Although the screws come in several lengths, choose one that suits your door rather than forcing a screw that is too long or too short. Compared with the HauSun, this is a handle-focused kit rather than a package that also supplies the lock.
Pros:
- Fits the stated 1-1/4 to 1-3/4-inch door-thickness range
- Reversible for left- or right-hand doors
- Eight screws in four lengths are included
- White die-cast finish offers a simple, neutral appearance
Cons:
- Mortise lock is not included
- Exterior pull is non-keyed
Verdict: The HILLMASTER is a sensible handle-only replacement when your door matches the 3-15/16-inch pattern and falls within its stated thickness range.
SANKINS White Diecast Set: A Straightforward Handle-Only Option
This SANKINS set is a white die-cast replacement for mortise-style patio door handles. It includes an interior handle, a non-keyed exterior pull, a thumb latch lever, and screws in three lengths. The package does not include the mortise lock, so it is best suited to a door whose existing lock is still in place or will be sourced separately.
The stated fit is for mounting holes 3-15/16 inches apart and doors from 1-1/2 to 1-3/4 inches thick. Its reversible design works on left- or right-hand doors. The brand also lists a matching 45-degree mortise lock separately, which may be useful if you need to replace that part too.
Compared with HILLMASTER, the SANKINS range begins at a thicker door size. That makes measuring thickness especially important: a small mismatch can affect how the handles sit or how the screws engage. The package description is clear that this particular set is supplied without a mortise lock.
Pros:
- Reversible for left- or right-hand doors
- Includes three pairs of screws in different lengths
- Fits the stated 3-15/16-inch hole spacing
- White die-cast finish pairs with many patio door frames
Cons:
- Mortise lock is sold separately
- Specified door-thickness range starts at 1-1/2 inches
Verdict: Choose SANKINS if your door matches its measurements and you need a simple replacement handle set rather than a complete lock kit.
Zinkitool Black Handle Set: For a Different Hole Pattern
The Zinkitool set differs from the other options in both finish and fit. It has a black die-cast design and is listed for doors 1 to 1-1/8 inches thick with mounting holes 6-5/8 inches apart. That spacing is much wider than the 3-15/16-inch pattern found on the other four products, so this is not a general substitute for those handles.
The kit is described as including interior and exterior handles, mounting screws, trim plates, and a keeper. Its reversible design is intended to work with left- or right-hand doors. The product description also mentions flush-mount cutouts and standard mortise locks, but does not clearly list a mortise lock as an included component.
This may suit a thinner door where a black finish is desired, provided the hole spacing and lock arrangement match. If your door is thicker than 1-1/8 inches or has holes 3-15/16 inches apart, one of the other products is a closer match based on the supplied measurements.
Pros:
- Black finish offers an alternative to white hardware
- Listed for 1- to 1-1/8-inch-thick doors
- Reversible for left- or right-hand doors
- Includes trim plates and a keeper
Cons:
- Uses 6-5/8-inch hole spacing, unlike the other picks
- Mortise lock inclusion is not specified
Verdict: Consider Zinkitool only if your door is thin enough and its existing holes are 6-5/8 inches apart.
How to Choose a Sliding Door Handle
Measure the Mounting-Hole Spacing
Measure from the center of one mounting hole to the center of the other. This center-to-center distance is often called the hole spacing. Four options here use 3-15/16-inch spacing, which is about 100 mm. The Zinkitool uses 6-5/8-inch spacing, or about 168 mm. These patterns are not interchangeable, so confirm your measurement before choosing a style.
Check Your Door Thickness
Use a ruler or tape measure to check the thickness of the door where the handles attach. The TPard is listed for 1-3/8 to 1-3/4-inch doors, HILLMASTER for 1-1/4 to 1-3/4 inches, SANKINS for 1-1/2 to 1-3/4 inches, and Zinkitool for 1 to 1-1/8 inches. The HauSun listing does not provide a door-thickness range, so confirm fit details with the seller if that option is your preferred choice.
Identify the Lock Style and What Is Included
Look at the edge of your sliding door to identify the existing latch or mortise lock. A replacement handle may fit the mounting holes but still not work with a different lock style. Of these picks, HauSun explicitly includes a 45-degree mortise lock. TPard, HILLMASTER, and SANKINS are handle sets without a mortise lock. For Zinkitool, the supplied description does not clearly state whether a lock is included, so check the package details before ordering.
Decide Whether You Need a Keyed Exterior
The HauSun, TPard, HILLMASTER, and SANKINS listings describe their exterior pulls as non-keyed. The HauSun listing specifically says its handle cannot currently be converted to a keyed version. If you need a keyed exterior lock, make sure the product you select offers that feature; do not assume a non-keyed pull can be changed later.
Match the Handle to Your Door Handing
A reversible or non-handed handle can be mounted on either a left- or right-hand sliding door, but follow the installation instructions to orient the latch and handle correctly. All five options are described as reversible or non-handed. Still, compare the new handle with your current setup before removing the old hardware, especially if the latch has a particular direction.
Choose the Right Screw Length and Finish
Several sets include screws in multiple lengths to suit different door thicknesses. Select a length appropriate for your door and the handle assembly, and avoid forcing screws that do not line up or engage properly. Finish is another practical choice: HauSun, HILLMASTER, and SANKINS are described with white hardware, TPard combines oak and white, and Zinkitool has a black finish.
FAQs
How do I measure sliding door handle hole spacing?
Measure from the center of one mounting hole to the center of the other. Do not measure from the outside edges of the holes. Compare your result with the product’s stated spacing before ordering.
Are 3-15/16-inch and 6-5/8-inch handle patterns interchangeable?
No. They are different mounting patterns. The Zinkitool is listed for 6-5/8-inch spacing, while the other four products are listed for 3-15/16-inch spacing.
Do these handle sets include a mortise lock?
The HauSun kit explicitly includes a 45-degree mortise lock. The TPard, HILLMASTER, and SANKINS descriptions say the lock is not included. The Zinkitool description mentions standard mortise locks but does not clearly state that one comes in the package.
Can these handles fit a left-hand or right-hand sliding door?
All five are described as reversible or non-handed for use on left- or right-hand doors. Confirm the orientation of your latch and follow the product instructions during installation.
Are these replacement handles keyed?
The HauSun, TPard, HILLMASTER, and SANKINS descriptions identify their exterior pulls as non-keyed. The Zinkitool description calls the set non-keyed in its product title. If keyed access matters, verify that feature directly in the product listing before purchase.
Can I replace only the handle and keep my existing lock?
Often, a handle-only set is a practical option if your existing mortise lock is compatible and still works. Check the lock style and how the handle operates it. A matching hole pattern by itself does not guarantee that the handle and latch will work together.
Which option is best if I need a complete handle-and-lock kit?
Based on the supplied product details, HauSun is the clearest choice because its package includes the interior handle, exterior pull, thumb latch, and mortise lock. Confirm the door’s mounting-hole spacing and latch style before buying.
Final Recommendation
For a common 3-15/16-inch mounting pattern, the HauSun is the most complete option if you need a mortise lock as well as new handles. If your existing lock is sound, compare the TPard, HILLMASTER, and SANKINS by finish and door-thickness range. Choose the Zinkitool only when your door matches its thinner profile and wider 6-5/8-inch hole spacing. Measure first, then confirm the lock and package contents to avoid ordering a handle that does not fit your door.