If you’re searching for a sliding door handle with 5 1/2-inch hole spacing, measure from the center of one mounting hole to the center of the other before you buy. Of these five options, the KVTTOZA set is the closest match at 5.43 inches, but it is not an exact 5 1/2-inch fit. The other picks have different or unspecified spacing, so check your door and the product details carefully to avoid ordering a handle that won’t line up.
Table of Contents
Quick Comparison
| Product | Listed hole spacing | Key detail |
|---|---|---|
| KVTTOZA White No-Lock Handle Set | 5.43 inches | Closest listed spacing to 5 1/2 inches; fits specified door thickness of 30–40 mm |
| Probrico Reversible Sliding Door Handle | 3.94 inches | Fits doors 1–2 inches thick; no key or mortise lock included |
| PRIME-LINE White Outside Pull with Latch | 4.88 inches | Outside pull with thumb lever for compatible mortise locks |
| Prime-Line C 1224 Black Handle Set | 3-15/16 inches in description | Non-keyed set for mortise hook-style handles; spacing details vary in listing |
| Knobonly White Keyless Handle Set | Not specified | Includes different screw lengths for doors of varying thicknesses |
Our Picks: Best Sliding Door Handle 5 1 2 Inch Hole Spacing reviews
1. KVTTOZA White Handle Set: Closest Match to 5 1/2-Inch Spacing
This KVTTOZA set is the closest option here to a 5 1/2-inch hole pattern. Its listed center-to-center spacing is 5.43 inches, or about 5 3/7 inches. That difference is small, but don’t assume the holes will line up: compare the measurement with your existing handle and door before ordering.
The handles are made from die-cast aluminum alloy and have a white powder-coated finish. The set is reversible for left- or right-opening doors and is designed for aluminum-framed sliding doors. It is a no-lock style, so it’s best for replacing a pull handle when you don’t need a locking mechanism as part of the handle.
Pay close attention to the door thickness requirement. The product information specifies 30–40 mm, roughly 1 3/16 to 1 9/16 inches, and notes that the screws may not work on thicker doors. Some owners have also needed to shorten the included screws for thinner doors. This is the strongest spacing match in the group, but it still requires a careful fit check.
Pros:
- Closest listed hole spacing to 5 1/2 inches at 5.43 inches
- Reversible for either door orientation
- Die-cast aluminum construction with a powder-coated finish
- Includes two handles, screws, and screw-hole covers
Cons:
- Not an exact 5 1/2-inch spacing match
- Specified door thickness range is narrower than some alternatives
Verdict: Choose this set if your measured hole spacing is close to 5.43 inches and your door thickness falls within its stated range; skip it if you need an exact 5 1/2-inch fit or a locking handle.
2. Probrico Reversible Handle for Common 3-15/16-Inch Spacing
The Probrico handle is made for a different mounting pattern than the target size: its listed center-to-center spacing is 3.94 inches, or about 3-15/16 inches. It is not a substitute for a 5 1/2-inch-spaced handle unless your door has compatible holes or you are prepared to make other changes.
The listing describes an aluminum, zinc-alloy, and stainless-steel construction with a powder-coated finish. The handle is reversible, and the included screw options are intended for doors between 1 and 2 inches thick. The product is described as having no key, mortise lock, or keeper, so treat it as a handle replacement rather than a complete locking solution.
Some owners find the set useful as a replacement for an older patio door handle. Others have had to source different screws for doors with a pocketed or thicker construction. If projection from the door matters—for example, because of nearby blinds—check the dimensions closely, since the actual handle may stick out more than you expect.
Pros:
- Reversible design for left- or right-hand use
- Includes screw options for a range of door thicknesses
- Powder-coated finish and mixed metal construction
- Useful as a replacement when your door uses 3-15/16-inch spacing
Cons:
- Hole spacing is far smaller than 5 1/2 inches
- Does not include a key, mortise lock, or keeper
Verdict: Consider Probrico for a 3-15/16-inch pattern and a door within its thickness range, but not as a direct match for 5 1/2-inch spacing.
3. PRIME-LINE White Outside Pull with a Latch Lever
This PRIME-LINE product is an outside patio door pull with an integrated thumb lever, rather than a full inside-and-outside handle set. Its listed mounting-hole spacing is 4.88 inches, which is closer to the target than the 3-15/16-inch options but still falls short of 5 1/2 inches.
The pull has a die-cast metal body and a white powder-coated finish. Its non-handed design can work on either left- or right-sliding doors. The thumb lever is intended to operate a compatible mortise lock, so the existing lock style and door setup matter. Confirm that the lock and mounting pattern match before purchasing.
This can suit someone who needs to replace an outside pull while keeping a compatible mortise-lock arrangement. It is less suitable if you need both interior and exterior handles in one package or are looking for an exact 5 1/2-inch hole pattern. The listing also emphasizes checking the door configuration and lock style, which is especially important for this more specific replacement part.
Pros:
- Outside pull includes a thumb lever for a compatible mortise lock
- White powder-coated die-cast construction
- Non-handed design fits either door orientation
- Listed spacing is 4.88 inches
Cons:
- Not a full handle set
- Spacing does not match 5 1/2 inches
Verdict: Pick this only if you need an outside pull with a compatible mortise-lock setup and your measured holes match its 4.88-inch spacing.
4. Prime-Line C 1224: Black Non-Keyed Mortise-Style Handle Set
The Prime-Line C 1224 is a black inside-and-outside handle set designed for sliding patio doors with a mortise hook-style lock. It is non-keyed and reversible, but it is intended for a much smaller hole pattern than the target. The product description states 3-15/16-inch spacing, while another measurement in the listing differs, so verify the current product measurements and your door before buying.
The set is made from painted die-cast material and includes the interior and exterior handles. Its non-keyed design may suit a door where you want a handle replacement but do not need a keyed exterior. The key compatibility question is the mortise lock: the set is specifically described for mortise hook-style handles, so it may not work with a different lock type.
Some owners find this type of replacement substantial and straightforward to install when the door is compatible. However, this is not a universal fit. The black finish may also be a poor visual match for a white or aluminum door, and the spacing makes it a clear mismatch for the requested 5 1/2-inch pattern.
Pros:
- Includes interior and exterior handles
- Reversible for either door orientation
- Designed for mortise hook-style door handles
- Black finish can suit doors with dark hardware
Cons:
- Not designed for 5 1/2-inch hole spacing
- Listing measurements are not fully consistent, so confirm the fit
Verdict: This is a possible replacement for a compatible mortise hook-style door with matching holes, but it is not the right choice for a 5 1/2-inch pattern.
5. Knobonly White Keyless Set with Multiple Screw Lengths
Knobonly’s white set includes an interior handle, an exterior pull without a keyed cylinder, screws in two lengths, a thumb turn, and connecting columns. The product information says it is intended for doors from 1 to 2 inches thick. It does not provide a center-to-center hole measurement, so you’ll need to confirm that detail with the seller or product listing before treating it as a possible fit for your door.
The aluminum-alloy handles have a smooth finish and a simple shape that can suit sliding doors, balcony doors, and patio doors. The different screw lengths may help with doors of varying thicknesses, but they do not guarantee that the mounting holes will align. Also verify that the supplied lock-related parts are compatible with the existing door mechanism before installation.
This set may appeal if you want white hardware and need more than one screw length. Its lack of a stated hole spacing is a key drawback for a replacement job, especially when your current holes are already drilled. Do not rely on the general door-thickness range as proof that the handle will fit.
Pros:
- Includes interior and exterior handle pieces
- Comes with two screw lengths for different door thicknesses
- White aluminum-alloy construction
- Designed for doors between 1 and 2 inches thick
Cons:
- Center-to-center hole spacing is not specified in the supplied details
- Compatibility with the existing lock mechanism should be checked
Verdict: Consider Knobonly only after confirming its hole pattern and lock compatibility; the missing spacing measurement makes it a risky choice for a direct replacement.
How to Choose a Sliding Door Handle with 5 1/2-Inch Hole Spacing
Measure from the center of each mounting hole
Use a ruler or tape measure to find the distance between the centers of the two screw holes, not from the outside edges of the holes or the handle plate. If you still have the old handle, measure its mounting holes directly. A small difference can prevent the screws from lining up, so compare your measurement with the product’s stated center-to-center spacing before placing an order.
Know whether your door needs an exact match
Replacing a handle over existing holes usually calls for a close match. In this selection, the closest stated measurement is 5.43 inches, which is near 5 1/2 inches but not identical. If the holes do not align, you may need another handle with the exact pattern or a suitable repair solution. Don’t assume that a product labeled universal will fit every hole layout.
Check door thickness and screw length
Measure the door where the handle fastens, including any overlapping or pocketed section if the screws pass through more than one part. Confirm both the allowed door thickness and the length of the included screws. A handle can have the right hole spacing but still be unsuitable if its screws are too short or extend too far.
Match the handle to the lock system
Some products are simple pulls with no lock, while others are designed to operate a compatible mortise lock. Check whether your door uses a mortise-style mechanism and whether the replacement includes the parts you need. A non-keyed handle is not the same as a complete lock, and an outside pull with a latch lever may not replace an interior-and-exterior handle set.
Confirm orientation, finish, and handle projection
A reversible or non-handed handle can work on either left- or right-sliding doors, but check the listing to make sure. Choose a finish that suits your existing door hardware, and look at how far the handle projects from the door if it sits near blinds, curtains, or a screen door. Product dimensions can help you judge whether the replacement will clear nearby features.
Read the package contents and fit details
Check whether the box contains one pull or a full inside-and-outside set, along with the screws, covers, and lock components you need. If the hole spacing is missing or the measurements conflict, confirm the details before ordering. Product names alone may not tell you whether the handle matches your door.
Frequently Asked Questions
Is 5.43 inches the same as 5 1/2 inches?
No. The KVTTOZA set’s listed spacing is 5.43 inches, which is close to 5 1/2 inches but not an exact match. Measure your door and check whether that difference will allow the mounting holes to line up.
Which option is closest to 5 1/2-inch hole spacing?
The KVTTOZA white no-lock set is closest among these choices, with listed center-to-center spacing of 5.43 inches. It still should not be treated as an exact 5 1/2-inch replacement.
How do I measure sliding door handle hole spacing?
Measure from the center of one mounting hole to the center of the other. If you cannot access the holes directly, remove the old handle if it is safe to do so, then measure the door’s mounting points.
Can I install a handle with different hole spacing?
Not necessarily. If the screws do not line up with the existing holes, the handle may not attach securely without additional work. For a simple replacement, choose a handle with matching spacing and compatible door thickness.
Does a no-key handle set include a complete lock?
Not always. Some no-key sets are only handles, while others include a thumb turn or parts intended to work with a compatible mechanism. Check the package contents and confirm that the parts match your door’s existing lock.
Why should I check door thickness as well as hole spacing?
Hole spacing determines whether the handle’s mounting points line up. Door thickness affects whether the supplied screws can pass through and fasten the handle correctly. Both measurements matter for a secure fit.
Final Recommendation
For a door with holes near 5 1/2 inches apart, the KVTTOZA set is the closest match in this group at 5.43 inches, provided your door thickness also falls within its stated range. Because it is not an exact match, confirm the measurement before ordering. The other options have substantially different spacing or do not list it, so they are better suited to doors with verified compatible patterns rather than a 5 1/2-inch replacement.
