Corrugated metal roofing can be a practical way to cover a shed, patio, coop, or other small structure, but panel size, thickness, and overlap all affect how much material you need. The four options below differ most in panel length and package details. Compare their listed dimensions with your roof measurements, and remember that overlap reduces the usable coverage of each sheet.
Table of Contents
Quick Comparison
| Product | Panel size | Pack details | Best for |
|---|---|---|---|
| BOBIBAN 20-Pack Grey Roofing Panels | 73.23 × 17.72 in; 0.01 in thick | 20 panels, 100 screws, gloves | Longer runs on sheds and similar structures |
| BOBIBAN 20-Piece Grey Roof Panels | 73.23 × 16.73 in; 0.01 in thick | 20 panels, 100 screws, gloves | DIY projects needing long panels |
| NeatiEase Corrugated Roofing Panels | 5.1 ft in the product title; other lengths listed | 20 panels; screws and gloves included | Projects where length and color options matter |
| YorFix 20-Pack Galvanized Panels | 42.52 × 18 in; 0.01 in thick | 20 panels, 200 screws, gloves | Smaller roofs and shorter panel runs |
Our Picks: Best 20 Corrugated Metal Roofing reviews
1. BOBIBAN 20-Pack: Long, Wide Panels for Fewer Seams
This BOBIBAN set includes 20 grey galvanized steel panels measuring 73.23 by 17.72 inches. The listing specifies a thickness of 0.01 inch and includes 100 screws and a pair of gloves. Its longer format can mean fewer end-to-end joins than shorter sheets on a roof with a suitable run length.
The corrugated profile is intended to help with drainage and add rigidity, while the overlapping edges are designed to join neighboring panels. The sheets are also described for use on gazebos, carports, patios, barns, and wall coverings. Measure your roof carefully and plan for overlap before estimating coverage; the panel’s full width is not the same as its installed coverage.
One trade-off is the listed 0.01-inch thickness, which is a detail worth checking against your project’s span, support spacing, and local requirements. The product information also does not specify a tested load capacity or an installed coverage figure. Treat the included screws as a convenience, and confirm they suit your roof framing and installation plan.
Pros:
- Long panels can reduce the number of end joints on a compatible roof.
- Twenty sheets, 100 screws, and gloves are included.
- Galvanized steel and corrugations are designed for outdoor roofing use.
- Suitable for several small-building and covering projects.
Cons:
- The stated 0.01-inch thickness may not suit every span or structural need.
- Effective coverage will be less than the panels’ full dimensions because of overlap.
Verdict: Choose this set if you want long, relatively wide sheets and have confirmed that its listed thickness and dimensions suit your structure.
2. BOBIBAN 20-Piece Set: Long Panels with a Narrower Profile
This grey BOBIBAN package contains 20 galvanized steel panels, each listed as 73.23 inches long by 16.73 inches wide and 0.01 inch thick. It also comes with 100 screws and a pair of gloves. Compared with the other long BOBIBAN option in this guide, these sheets are one inch narrower, so check the layout and overlap needed for your roof.
The product description says the panels can be cut to size and joined with overlapping edges. It lists uses such as sheds, pavilions, patios, barns, and mobile homes. The corrugated shape is intended to support drainage and panel strength, but the listing does not provide a specific load rating or a usable-coverage measurement after overlap.
The package title states 170.2 square feet. Treat that as a listed package figure rather than guaranteed installed coverage: the overlap between sheets can reduce the area covered. Check the dimensions and coverage with the seller before ordering, especially if you are buying for a roof with little room for extra material.
Pros:
- Long panels may work well for roofs with matching dimensions.
- Twenty sheets, 100 screws, and gloves are included.
- The product description allows cutting panels to size.
- Listed for roof and wall-covering applications.
Cons:
- At 16.73 inches wide, each sheet is narrower than the other long BOBIBAN option here.
- The stated package area does not account clearly for installed overlap.
Verdict: This is a reasonable option if its long length and narrower width fit your layout, but verify the usable coverage before deciding how many packs to buy.
3. NeatiEase 20-Piece Panels: More Listed Length Choices
NeatiEase describes these as galvanized corrugated steel panels with a listed thickness of 0.012 inch. The product title identifies a 5.1-foot option, while the description also lists 5-, 6-, and 8-foot lengths, along with black or grey colors. The exact choice and package details may depend on the selected listing option, so confirm them before placing an order.
The description says the package contains 20 panels and includes installation screws and gloves. It presents the overlapping-edge design as a way to join sheets and lists uses ranging from pergolas and garages to sheds, patios, and wall cladding. The length options may make it easier to match different projects, but you still need to account for overlap and cuts when planning coverage.
At 0.012 inch, the stated thickness is greater than the 0.01-inch figure listed for the other three products here. That alone does not establish whether a panel is right for a particular roof: support spacing, fastening, loads, and local requirements still matter. The product information does not give an exact panel width or a load rating, so check the listing details for your chosen configuration.
Pros:
- Several lengths and two colors are described.
- Listed thickness is 0.012 inch.
- Twenty panels and installation accessories are included, according to the description.
- Listed for a broad range of roof and cladding projects.
Cons:
- The exact selected length, color, and package configuration need to be confirmed.
- The supplied product details do not state panel width or load capacity.
Verdict: Consider NeatiEase if its available length and color options match your project, and verify the exact configuration and fit before ordering.
4. YorFix 20-Pack: Shorter Sheets with 200 Included Screws
This YorFix set includes 20 galvanized steel panels measuring 42.52 by 18 inches, with a listed thickness of 0.01 inch. It comes with 200 fastening screws and a pair of gloves. The shorter format may be easier to plan around compact roofs, though a longer roof run may require more end-to-end joins than with the longer panels in this comparison.
The description highlights corrugations for overlap and drainage and lists uses such as sheds, coops, patios, workshops, and pergolas. It also says the panels are lightweight and can be cut. A protective surface film needs to be removed before installation; the listing recommends peeling it in a shaded area before the sheets heat up in direct sunlight.
As with the other 0.01-inch options, confirm that the panel thickness and your planned support spacing are suitable for the structure. The listed dimensions do not tell you the final coverage once sheets overlap, so make a layout plan before estimating the number of packs. Wear suitable hand protection when handling metal edges.
Pros:
- Shorter sheets can suit compact structures and smaller roofing sections.
- Includes 200 screws and a pair of gloves.
- Panel dimensions and thickness are clearly stated.
- The listing gives a specific instruction for removing the protective film.
Cons:
- Shorter panels can mean more end joints on a long roof run.
- The stated 0.01-inch thickness may not fit every structural application.
Verdict: Pick YorFix if shorter panels suit your project and the extra included screws are useful; check the required support and overlap before installation.
How to Choose Corrugated Metal Roofing Panels
Measure the roof and plan for overlap
Measure each roof section and note its slope and length before choosing a panel size. Corrugated sheets need to overlap, so the listed panel width is not the same as the width it will cover once installed. Ask for the recommended side and end overlap if it is not clear in the product details, then use that figure when estimating how many panels you need.
Match panel length to the roof run
Longer sheets can reduce the number of end-to-end joins when their length suits the roof. Shorter sheets may be easier to handle or fit smaller sections, but can require more joins along a longer run. Compare the panel length with your roof measurements, and account for cuts and any roof-edge overhang in your plan.
Check thickness and structural requirements
The supplied listings give thicknesses of 0.01 inch for three options and 0.012 inch for NeatiEase. Thickness alone does not tell you the load a roof can carry. Confirm the required support spacing, fastening method, and local building rules for your structure. For a permanent or load-bearing roof, consult a qualified roofing professional if you are unsure.
Confirm what comes in the package
Included hardware differs: the BOBIBAN options list 100 screws and gloves, YorFix lists 200 screws and gloves, and NeatiEase says screws and gloves are included without giving a screw count in the supplied details. Check that the fasteners work with your roof supports and installation plan. Do not assume that a listed accessory replaces any hardware your project specifically requires.
Consider the finish, color, and surface film
Color options vary by product listing, and NeatiEase describes black and grey choices. If appearance matters, confirm the selected color and finish before ordering. YorFix specifically notes a protective film that should be removed before installation; follow the product’s instructions for your chosen panels.
Plan for safe handling and cutting
Metal panels can have sharp edges, especially after cutting. Use the included gloves where provided and follow safe handling practices and the manufacturer’s instructions. Check that you have an appropriate way to cut and fasten the sheets before starting, and keep the panel layout clear so you can avoid unnecessary cuts and waste.
Frequently Asked Questions
How many panels do I need for my roof?
That depends on the roof’s dimensions and the amount of overlap between sheets. Calculate the coverage using the installed width and length—not just the full panel dimensions—and allow for cuts and waste. If the listing does not provide usable coverage, ask the seller for its recommended overlap.
Are the listed panel dimensions the actual coverage?
No. The listed dimensions describe the sheets themselves. Because adjacent panels overlap, the installed coverage is lower than the combined full dimensions. Confirm the overlap amount before estimating the number of panels or packs.
Which option has the thickest panels?
NeatiEase lists a thickness of 0.012 inch. The other three products list 0.01 inch. Thickness is only one factor in choosing roofing; also check the structure, support spacing, fastening requirements, and local rules.
Are screws included with these roofing panels?
The two BOBIBAN products list 100 screws each, and YorFix lists 200 screws. NeatiEase says screws are included but does not state a count in the supplied product details. Confirm the hardware included with your chosen product and make sure it suits your installation.
Can these panels be used on walls or outdoor structures?
The product descriptions list uses beyond roofs, including sheds, patios, barns, pergolas, carports, and wall cladding. Check that the chosen panel dimensions and installation method suit the specific structure. These listings do not establish suitability for every building or structural use.
What should I check before installing?
Confirm the selected dimensions, color, package contents, overlap, support spacing, and fastening method. Follow the product instructions, local requirements, and safe handling practices. For YorFix panels, remove the protective film before installation as directed in the listing.
Final Recommendation
For long roof runs, the two BOBIBAN sets offer long panels, with the 73.23-by-17.72-inch option providing a little more listed width than its 16.73-inch counterpart. NeatiEase stands out for its stated 0.012-inch thickness and several listed length choices, though you should confirm the exact configuration and panel width. YorFix may be a better fit for smaller sections where its shorter sheets and larger stated screw count make sense. Before choosing any set, verify installed coverage, structural fit, and local requirements rather than relying on panel dimensions alone.
