The best bathroom stall door lock is the one that fits your partition, mounting pattern, and accessibility needs. Commercial stall hardware is not always interchangeable: surface-mounted slide latches, concealed assemblies, and indicator locks use different designs. The options below cover common replacement needs, from stainless steel surface latches to a concealed latch for a specific metal partition style.
Table of Contents
Quick Comparison
| Product | Lock Type | Notable Fit or Feature | Best For |
|---|---|---|---|
| Brixwell Surface Mount Slide Latch Keeper Set | Surface-mounted slide latch | 3-1/2-inch latch hole centers; keeper fits 1-1/4-inch square-edge pilasters | Matching a compatible existing setup |
| TPH Supply Stainless Steel Surface Mount Slide Latch | Surface-mounted slide latch with keeper | Stainless steel; intended for common partition materials | Busy commercial restrooms |
| TPH Supply 2-3/4-Inch Surface Mount Slide Latch | Surface-mounted slide latch | 2-3/4-inch mounting-hole centers; chrome-plated satin finish | Replacing a latch with matching hole spacing |
| PINGPINGXIE Stainless Steel Stall Door Lock | Turn-to-lock bolt | Red-and-green occupancy indicator; 36 mm hole spacing | Stalls that need a visible occupancy signal |
| TPH Supply Concealed Latch Assembly | Concealed latch | Designed for 1-inch-thick flush metal partition doors | Compatible metal stall door repairs |
Our Picks: Best Bathroom Stall Door Lock reviews
1. Brixwell Surface Mount Slide Latch Keeper Set
This Brixwell set pairs a surface-mounted sliding latch with a keeper. Its zinc construction has a chrome finish, and the listing specifies mounting holes spaced 3-1/2 inches apart. Because it mounts on the surface, installation does not require a recessed pocket or mortising.
The main fit detail is the keeper: it is made for a 1-1/4-inch square-edge pilaster. That makes this a more targeted replacement than a universal pick. Check your partition edge and existing hole spacing before ordering; matching the latch alone is not enough if the keeper will not line up.
The included fasteners make this a practical option when both latch and keeper need replacement. The zinc-and-chrome construction is a straightforward choice for basic operation, but the supplied information does not identify it as stainless steel. For a wet or especially busy restroom, compare it with the stainless steel TPH Supply options.
Pros:
- Includes both the slide latch and keeper
- Surface mounting avoids the need for a recessed installation
- Fasteners are included
- Hole spacing and pilaster fit are clearly specified
Cons:
- Keeper fit is specific to a 1-1/4-inch square-edge pilaster
- Zinc construction may be less suitable than stainless steel for demanding wet environments
Verdict: Choose this set when its hole spacing and pilaster dimensions match your existing stall hardware; otherwise, consider a more suitable latch style or material.
2. TPH Supply Stainless Steel Surface Mount Slide Latch
This TPH Supply model is a surface-mounted slide latch supplied with a matching keeper. Its stamped stainless steel construction is intended for commercial restroom use, where humidity and frequent operation make material choice important. It is listed as compatible with phenolic, powder-coated, and plastic laminate partitions.
The listing describes it as designed for accessible commercial stalls, including doors over 32 inches wide, where easy entry and exit are important. That description is useful when narrowing options, but it should not replace checking local accessibility requirements or confirming that the latch works with the specific door and partition layout.
Compared with the Brixwell set, this option puts more emphasis on stainless steel construction and common partition materials. The tradeoff is that the product data does not provide a mounting-hole measurement, so you will need to check the hardware dimensions or confirm fit before treating it as a direct replacement.
Pros:
- Stainless steel construction for humid restroom settings
- Includes a matching keeper
- Listed for phenolic, powder-coated, and plastic laminate partitions
- Surface-mounted design can suit replacement work without door modifications
Cons:
- Mounting-hole spacing is not provided in the supplied specifications
- Confirm accessibility and door compatibility for your specific installation
Verdict: This is the strongest general-purpose choice in this group if you need a stainless steel surface latch and can verify that its mounting layout fits your partition.
3. TPH Supply 2-3/4-Inch Surface Mount Slide Latch
This TPH Supply latch is another surface-mounted option, with a satin chrome-plated finish and mounting holes set 2-3/4 inches apart. That measurement is its key selling point for a replacement: compare it with your existing holes before buying, since it differs from the 3-1/2-inch spacing of the Brixwell latch.
The product is listed for phenolic, powder-coated, and plastic laminate partitions. Its description also identifies it as a heavy-duty, low-maintenance option for high-traffic settings such as offices, schools, restaurants, and gyms. The listing calls it ADA compliant, but actual accessibility depends on the full stall and installation, so check the applicable requirements for your project.
This model is a better fit when its smaller mounting-hole spacing matches the door than when you simply want a generic replacement. The supplied information does not specify a keeper or include details about fasteners, so confirm what your installation requires before ordering.
Pros:
- Clearly specified 2-3/4-inch mounting-hole centers
- Listed for several common partition materials
- Surface-mounted design suits latch replacement work
- Satin chrome-plated finish
Cons:
- Different hole spacing from the Brixwell option
- Supplied details do not specify whether a keeper or fasteners are included
Verdict: Consider this latch when you need a surface-mount replacement and have confirmed the 2-3/4-inch hole spacing matches your door.
4. PINGPINGXIE Stainless Steel Lock with Occupancy Indicator
Unlike the slide latches above, this lock uses a turn-to-lock bolt and includes a red-and-green occupancy indicator. The listing describes a 304 stainless steel body with a polished silver finish and keyless operation from inside the stall. The indicator is intended to show whether the stall is vacant or occupied.
This design may be useful in shared facilities where a clear occupancy signal can help reduce confusion outside the door. Its listed dimensions include 36 mm hole spacing and an 85 mm handle, so measure the existing door and hardware carefully before purchasing. The description says it fits most standard toilet partition doors, but that does not guarantee compatibility with every partition.
It differs from a simple slide latch in both operation and appearance. If your existing stall uses a slide latch and keeper, this may require a different mounting arrangement. The stainless steel construction is a useful feature for bathroom use, but the product information does not provide the same partition-material detail as the TPH Supply latch listings.
Pros:
- Red-and-green indicator provides a visible occupancy signal
- Keyless turn-to-lock operation
- 304 stainless steel construction
- Hole spacing and handle size are specified
Cons:
- May not replace a standard slide latch without a matching installation layout
- Verify the 36 mm hole spacing and door fit before ordering
Verdict: Pick this option when an occupancy indicator is a priority and your partition can accommodate its bolt-style design and dimensions.
5. TPH Supply Concealed Latch Assembly for Flush Metal Doors
This TPH Supply product is a concealed latch assembly rather than a surface-mounted lock. It is designed for flush metal partition doors that are 1 inch thick and have a powder-coated, baked-enamel finish. Its center-screw design and chrome-plated Zamac construction are aimed at replacing worn or missing hardware on a compatible door.
Because it is made for a particular door style and thickness, fit should be your first concern. It is not the right choice for a typical surface-latch replacement or for a partition that does not match the stated flush metal construction. The listing describes it as intended for accessible stall doors; as with any hardware, confirm the full installation meets the requirements that apply to your site.
For the right door, a concealed assembly can be a more appropriate repair than adding an external latch. The narrow compatibility makes it less flexible than the stainless surface-mount options, but also helps define exactly what type of replacement it is meant to serve.
Pros:
- Designed specifically for flush metal partition doors
- Fits the stated 1-inch door thickness
- Center-screw design for replacement work
- Chrome-plated Zamac construction
Cons:
- Limited to compatible flush metal doors and finishes
- Not a general replacement for surface-mounted slide latches
Verdict: Choose this assembly only when your stall door matches the listed flush metal style and 1-inch thickness.
How to Choose a Bathroom Stall Door Lock
Match the lock style to your existing hardware
Start by identifying whether your stall uses a surface-mounted slide latch, a turn-to-lock bolt, or a concealed latch assembly. These designs install differently and are not automatic substitutes for one another. If you are replacing a broken lock, matching the existing style can reduce the chance of needing new holes or other door changes.
Measure hole spacing and door thickness
Measure from the center of one mounting hole to the center of the next, and check the door thickness where the lock attaches. The products here specify different dimensions: 3-1/2-inch latch hole centers for the Brixwell set, 2-3/4-inch centers for one TPH Supply latch, and 36 mm spacing for the PINGPINGXIE lock. The concealed TPH Supply assembly is listed for 1-inch-thick doors. Do not assume that similar-looking hardware shares the same measurements.
Check the partition and keeper fit
Partition materials and edges can affect whether a latch and keeper line up. The stainless TPH Supply surface latch is listed for phenolic, powder-coated, and plastic laminate partitions. The Brixwell keeper is specified for a 1-1/4-inch square-edge pilaster. Check both the door and the pilaster, especially when replacing a complete latch-and-keeper set.
Choose a material for the setting
Restroom hardware may be exposed to humidity and frequent use. Stainless steel is specified for the TPH Supply surface latch and the PINGPINGXIE indicator lock; the Brixwell set is zinc with a chrome finish, while the concealed assembly is chrome-plated Zamac. Compare the listed materials with the demands of your facility, and follow the manufacturer’s care instructions when available.
Consider accessibility and operation
Think about how the lock operates from inside the stall and whether the door is part of an accessible restroom. Some listings describe their products as designed for ADA-related applications, but a latch by itself does not establish that a complete stall meets accessibility rules. Confirm the installation, door width, and local requirements before choosing hardware for an accessible stall.
Decide whether an occupancy indicator is useful
A red-and-green indicator can make vacant or occupied status easier to see from outside, but it adds a different lock style and fit requirement. If you do not need an indicator, a basic slide latch may be a simpler match for an existing commercial partition. Prioritize compatibility over extra features.
Frequently Asked Questions
Are bathroom stall door locks interchangeable?
No. Locks can differ in style, mounting-hole spacing, door thickness, partition material, and keeper design. Measure your existing hardware and check the product’s fit details before ordering.
What is the difference between a surface latch and a concealed latch?
A surface latch attaches to the face of the door or partition. A concealed latch is intended to sit within a compatible door assembly. The concealed TPH Supply model listed here is made for flush metal doors that are 1 inch thick, so it is not a direct substitute for a surface-mounted lock.
Which option includes a keeper?
The Brixwell set and the TPH Supply stainless steel surface latch are both listed with matching keepers. The supplied details for the other products do not specify a matching keeper.
Which lock has an occupancy indicator?
The PINGPINGXIE lock includes a red-and-green indicator and uses a keyless turn-to-lock bolt. Check its 36 mm hole spacing and other dimensions against your partition before buying.
Is stainless steel the best material for a restroom lock?
Stainless steel is a practical option for humid settings, and two products in this list specify stainless steel construction. Still, material is only one part of the decision. Fit, mounting style, door use, and maintenance also matter.
Does an ADA-labeled latch make a stall ADA compliant?
Not by itself. The listings describe certain latches as ADA compliant or intended for accessible stalls, but accessibility depends on the full stall and installation. Confirm current requirements with the appropriate authority for your project.
What should I measure before ordering a replacement lock?
Measure mounting-hole center spacing, door thickness, partition material, and the location and size of the keeper or pilaster. Also note whether your current lock is surface-mounted or concealed. These checks can help rule out incompatible options before installation.
Final Recommendation
Based on the supplied specifications, the TPH Supply stainless steel surface-mount slide latch is the most flexible starting point for a commercial restroom, thanks to its listed compatibility with several common partition materials. If you are replacing existing hardware, however, exact fit should guide your choice: select the Brixwell or 2-3/4-inch TPH Supply latch only when its measurements match, choose the PINGPINGXIE model when an occupancy indicator is important, and reserve the concealed TPH Supply assembly for the specified flush metal door style.