A cast iron pedestal tub can give your bathroom a timeless focal point, but its size, faucet setup, drain location, and substantial construction all matter before you buy. The options below range from compact double-ended designs to larger slipper tubs, with different tap-hole and drain arrangements. Compare those details with your bathroom layout and plumbing plans to find the best fit.
Table of Contents
Quick Comparison
| Product | Size | Design | Notable details |
|---|---|---|---|
| Signature Hardware Henley Double-Ended Pedestal Tub | 60 inches | Double-ended | Rear drain; 7-inch rim holes |
| Vintage Tub & Bath Oxford Double-Ended Tub | 60, 66, or 71 inches | Double-ended | 7-inch rim drillings for a deck-mounted faucet |
| Kingston Brass Single Slipper Pedestal Tub | 67 inches | Single slipper | 49.4-gallon capacity; deck-drilled for a tub filler |
| Signature Hardware Henley Soaking Pedestal Tub | 60 inches | Soaking pedestal | Tap deck, 7-inch rim holes, and drain kit |
| Signature Hardware Kateryn Soaking Pedestal Tub | 67 inches | Soaking pedestal | Center drain; pre-drilled overflow hole |
Our Picks: Best Cast Iron Pedestal Tubs reviews
1. Signature Hardware Henley 60-Inch Double-Ended Tub
This Henley pairs a 60-inch double-ended shape with a simple pedestal base and molded edge. Its balanced layout gives you a bathing position at either end, which can be useful if you prefer a symmetrical look or want more flexibility in how you settle into the tub.
The listing specifies cast iron construction, a rear drain, and 7-inch rim holes. Those holes are important to plan around: confirm that your chosen faucet and plumbing arrangement match the tub before ordering. The product is covered by a 25-year limited warranty, according to the supplied product information.
Compared with the Oxford, this is another compact double-ended choice, but the Oxford listing gives more size options and more detail about its finish. One practical caveat is that this listing is marked unavailable in the supplied product data, so check its current listing status before planning a purchase.
Pros:
- Double-ended design supports bathing from either end.
- 60-inch length may suit layouts that cannot accommodate a longer tub.
- Rear drain and 7-inch rim holes are specified for planning.
- Includes a 25-year limited warranty, according to the listing details.
Cons:
- The supplied product data marks the listing unavailable.
- Confirm faucet compatibility with the rim-hole spacing before buying.
Verdict: Choose the Henley if you want a classic 60-inch double-ended tub and its rear-drain and rim-hole layout suits your plumbing, but verify availability first.
2. Vintage Tub & Bath Oxford Double-Ended Tub
The Oxford is a cast iron double-ended tub offered in 60-, 66-, and 71-inch sizes. That range makes it easier to compare a more compact footprint with a larger statement piece, though you’ll need to confirm the exact size available on the product listing.
Its 7-inch rim drillings are designed for a deck-mounted faucet. The listing also describes a high-gloss enamel finish and notes that cast iron helps retain bathwater heat. These details make the Oxford a strong fit for someone who values a traditional look and wants a faucet mounted on the tub rather than on the wall.
Compared with the Henley, the Oxford has more listed size choices and clearer information about its finish and heat retention. The tradeoff is that the faucet drilling is a specific installation requirement, so it’s worth checking the faucet’s fit and your plumbing plan before committing.
Pros:
- Available in three listed lengths to suit different room plans.
- Double-ended design allows comfortable use from either end.
- 7-inch rim drillings accommodate a deck-mounted faucet.
- High-gloss enamel finish is described as smooth and easy to care for.
Cons:
- Rim drilling may limit faucet choices if your hardware does not match.
- The larger size options require careful measurement of the room and access path.
Verdict: The Oxford is a versatile pick if you want a double-ended cast iron tub with size options and your faucet plan matches its rim drillings.
3. Kingston Brass 67-Inch Single Slipper Tub
This Kingston Brass tub has a single-slipper profile, with one raised end that creates a more supported lounging position in one direction. Its overall listed dimensions are about 66 15/16 inches long by 30 5/16 inches wide. The tub has a hand-smoothed painted white exterior and a glossy white enamel finish on the interior, sides, and rim.
The listing gives a capacity of 49.4 gallons and a water depth of 13 9/16 inches to the overflow. It is deck-drilled for a tub filler, so plan around a compatible faucet setup. Compared with the double-ended Oxford and Henley, the Kingston favors a one-direction bathing position rather than a symmetrical design.
Its longer footprint and specified capacity may appeal if you want a roomier soaking tub, but these numbers don’t replace checking how the tub fits your space or what your plumbing can support. The supplied information does not give a warranty term, so confirm that detail with the seller if warranty coverage is important to you.
Pros:
- Single-slipper shape offers a raised end for lounging.
- Dimensions, water depth, and capacity are provided for planning.
- Glossy white enamel finish extends across the interior, sides, and rim.
- Deck-drilled for a tub filler.
Cons:
- Its nearly 67-inch length may not suit smaller bathrooms.
- The one-ended slope is less flexible than a double-ended design.
Verdict: Pick the Kingston Brass if you want a larger single-slipper tub and its dimensions, capacity, and deck-drilled faucet layout work for your bathroom.
4. Signature Hardware Henley 60-Inch Soaking Tub with Tap Deck
This 60-inch Henley is a freestanding cast iron soaking tub with a tap deck. The listing identifies 7-inch rim holes and says a drain kit is included, giving you key installation details to check against your faucet and plumbing plans.
Its 60-inch size is in the same compact range as the Oxford and the other Henley model. The main distinction is the combination of a tap deck and included drain kit; the supplied description does not specify a drain location or detailed dimensions. Confirm those points before ordering, especially if you are replacing an existing tub.
The product information also states that it has a 25-year limited warranty. Because cast iron tubs are substantial fixtures, plan for delivery, placement, and floor support with a qualified installer rather than treating it like a lightweight drop-in replacement.
Pros:
- 60-inch length may fit where larger tubs are impractical.
- Tap deck and 7-inch rim holes are specified.
- Drain kit is included according to the product title.
- Covered by a 25-year limited warranty, according to the listing.
Cons:
- The supplied details do not state a drain location or full dimensions.
- Faucet compatibility should be checked against the rim-hole layout.
Verdict: Consider this Henley if you want a 60-inch cast iron soaking tub with a tap deck and included drain kit, after confirming the missing fit and drain details.
5. Signature Hardware Kateryn 67-Inch Soaking Tub
The Kateryn is a 67-inch cast iron soaking tub designed for freestanding installation. Its listed center drain can be useful when planning the drain connection, while the pre-drilled overflow hole helps clarify another important plumbing detail before installation.
Compared with the 60-inch Henley soaking tub, the Kateryn is longer and lists a center drain rather than a tap deck and drain kit. The supplied description does not provide dimensions beyond its length or specify faucet drillings, so confirm the full specification and faucet arrangement before choosing it.
The listing states that the tub is covered by a 25-year limited warranty. It is marked unavailable in the supplied product data, so check the listing for current availability before making plans around this model.
Pros:
- 67-inch length offers a larger option than the 60-inch models.
- Center drain placement is clearly specified.
- Pre-drilled overflow hole is identified in the product details.
- Covered by a 25-year limited warranty, according to the listing.
Cons:
- The supplied product data marks the listing unavailable.
- Full dimensions and faucet-drilling details are not provided in the supplied description.
Verdict: The Kateryn is worth considering if you want a longer freestanding soaking tub with a center drain, provided the listing is available and its full specifications match your project.
How to Choose a Cast Iron Pedestal Tub
Measure the room and the delivery path
Start with the space where the tub will sit, not just the open floor area. Check the tub’s full length and width, allow room to move around it, and measure doorways, halls, and stairs along the delivery route. The supplied listings give complete dimensions for the Kingston Brass model, but not for every tub, so request missing measurements before ordering.
Match the tub shape to how you bathe
A double-ended tub has a similar bathing position at both ends, while a single-slipper tub has one raised end. Choose the double-ended shape if you want a balanced design and flexibility in seating direction. A slipper design may suit you better if you prefer leaning against one raised end.
Check faucet holes and faucet placement
Some models have rim holes or a tap deck for a deck-mounted faucet. Others may need a different faucet arrangement, but the supplied details do not confirm the drilling setup for every tub. Match the hole spacing and faucet style to your plumbing plan, and ask the seller or installer to confirm compatibility before purchase.
Confirm drain and overflow locations
Drain placement affects how the tub connects to your plumbing. These options include rear and center drain layouts, while one listing does not specify the drain location. Check both the drain and overflow details against your existing plumbing or renovation plans, and do not assume that a drain kit includes every part your installation requires.
Plan for cast iron construction
Cast iron is a substantial material, so delivery and installation need more planning than a lightweight fixture may require. Ask a qualified contractor to confirm that the floor can support the tub in its intended location. Also plan how the tub will be carried into the room and positioned without damaging surrounding finishes.
Consider the finish and care needs
The product details describe glossy or high-gloss enamel finishes on several models. Follow the manufacturer’s care instructions and check whether the finish covers the tub’s exterior as well as the interior. The Kingston listing specifically describes a glossy white enamel finish on all sides and the rim.
Read the warranty and availability details
Warranty coverage varies by product. The supplied information lists a 25-year limited warranty for the Signature Hardware models, but does not provide a warranty term for the Kingston or Oxford. Listings can also change availability, so confirm current stock, included components, and warranty terms before placing an order.
Frequently Asked Questions
What is a cast iron pedestal tub?
It is a freestanding bathtub made from cast iron and supported by a pedestal-style base. These tubs are often chosen for their classic look and solid construction.
What is the difference between a double-ended tub and a slipper tub?
A double-ended tub is shaped for bathing from either end. A single-slipper tub has one raised end, creating a more pronounced lounging side. The Oxford and Henley double-ended models contrast with the single-slipper Kingston Brass option.
Do these tubs include a faucet?
The supplied product details do not say that a faucet is included. Some tubs have rim holes or a tap deck for a deck-mounted faucet, so check the product listing and confirm the faucet separately.
How do I know if a tub will fit my bathroom?
Compare its full length, width, and height with your available space, plumbing, and delivery route. Ask for any dimensions not shown in the listing and confirm the layout with your installer before ordering.
Does a cast iron tub need extra floor support?
Cast iron tubs are substantial fixtures. Have a qualified contractor assess the floor and installation location rather than assuming your existing floor is suitable.
Which tub is the best choice for a smaller bathroom?
The 60-inch Henley and Oxford models are the shortest options in this group. A 60-inch length alone does not guarantee a fit, so check width, height, access, and clearance around the tub as well.
Final Recommendation
For the most flexible size selection among these options, the Vintage Tub & Bath Oxford stands out with its double-ended design and three listed lengths. If you want a defined lounging slope and detailed capacity information, consider the Kingston Brass single slipper. For any model, verify faucet holes, drain placement, full dimensions, floor support, and current availability before you buy.
