Choosing the best concrete sealer and waterproofer depends on the finish you want and the conditions your concrete faces. Penetrating sealers soak into the surface and help limit water entry while leaving a natural look. Acrylic sealers form a surface coating that can add color and sheen. The picks below include both approaches, so you can match protection to a driveway, patio, basement, or other concrete surface.
Table of Contents
Quick Comparison
| Product | Type and finish | Best suited for | Coverage listed |
|---|---|---|---|
| Ghostshield Lithi-Tek 9500 Ultra Concentrate | Penetrating, water-based concentrate | Densifying and waterproofing concrete | Up to 1,000 sq. ft. per coat from the mixed 5-gallon batch |
| Foundation Armor SX5000 WB | Penetrating, water-based silane-siloxane; natural look | Concrete, brick, pavers, and stone | Not stated in the supplied product details |
| Ghostshield Siloxa-Tek 8500 Ready to Use | Penetrating, water-based silane-siloxane; clear | Concrete and masonry exposed to water and deicing salts | Up to 250 sq. ft. per gallon per coat |
| Foundation Armor AR350 | Solvent-based acrylic; low-gloss wet look | Exterior concrete and pavers where color enhancement is wanted | About 175–225 sq. ft. per gallon |
| MasonryDefender Concrete Sealer | Penetrating silane-siloxane; clear and non-glossy | Driveways, sidewalks, and patios | About 90–150 sq. ft. per gallon |
Our Picks: Best Concrete Sealer And Waterproofer reviews
1. Ghostshield Lithi-Tek 9500: Concentrated Concrete Protection
Lithi-Tek 9500 is a water-based concentrate designed to penetrate concrete, densify it, and reduce moisture and vapor intrusion. Unlike a wet-look coating, it is aimed at changing the concrete’s protective properties rather than adding a glossy surface finish.
The concentrate is mixed with water before use: one gallon makes five gallons of sealer. The supplied details list coverage of up to 1,000 square feet per coat for the mixed batch. That makes it worth considering for a larger area, though actual coverage can vary with the concrete and application conditions. Measure your surface and follow the product directions when planning how much to mix.
This pick stands out for shoppers who want more than water repellency. Its stated benefits include helping reduce efflorescence, moisture intrusion, and hydrostatic pressure. It may be a useful option for concrete where moisture movement is a concern, but it is not a substitute for addressing the source of a serious water problem or repairing damaged concrete.
Pros:
- Concentrate makes five gallons when mixed as directed.
- Designed to densify and strengthen concrete as well as reduce moisture intrusion.
- Helps address efflorescence and water-vapor concerns.
- Listed coverage is up to 1,000 square feet per coat for the mixed batch.
Cons:
- You need to dilute the concentrate before application.
- It is not the right choice if you want a wet-look or color-enhancing finish.
Verdict: Choose Lithi-Tek 9500 if you want a penetrating water-based treatment focused on densifying concrete and limiting moisture, and you are comfortable mixing the concentrate.
2. Foundation Armor SX5000 WB: Natural-Look Water Repellent
Armor SX5000 WB is a water-based silane-siloxane sealer for unsealed concrete, brick, pavers, and stone. It works below the surface rather than leaving a film, so it is a better fit for people who want protection without a glossy or coated appearance.
The product is designed to help protect surfaces from water, snow, ice, and salt. The listed application method is a pump sprayer, which may help cover broad, open areas. The supplied details do not give a coverage rate, so check the container instructions and estimate your needs using the surface area you plan to treat.
Compared with the ready-to-use Siloxa-Tek 8500, this pick is also a water-based silane-siloxane product, but its listed details emphasize use across several masonry materials and pump-sprayer application. It may suit a project that includes more than concrete, as long as the surface is unsealed and compatible with the product directions.
Pros:
- Penetrates below the surface without leaving a film or coating.
- Designed for concrete, brick, pavers, and stone.
- Water-based formula with a natural-look finish.
- Listed for pump-sprayer application.
Cons:
- The supplied product details do not state coverage per container.
- It is specified for unsealed surfaces, so check compatibility before applying over an existing sealer.
Verdict: Consider SX5000 WB if you want a natural-looking penetrating sealer for unsealed concrete or a mix of masonry surfaces and prefer a water-based formula.
3. Ghostshield Siloxa-Tek 8500: Ready-to-Use Salt and Water Repellent
Siloxa-Tek 8500 is a ready-to-use, water-based silane-siloxane sealer. Its penetrating, non-film-forming formula is designed to reduce water and moisture intrusion while keeping the surface’s natural appearance. Because it does not add a surface coating, it is also intended to avoid peeling, flaking, or delaminating as a film can.
The product is listed for concrete, pavers, brick, and stone, including driveways, garages, basements, patios, and pool decks. It is also designed to resist damage associated with chlorides and deicing salts, as well as freeze-thaw exposure. The listed coverage is up to 250 square feet per gallon per coat; porous or rough surfaces may affect how far a gallon goes, so check the directions for your specific project.
Compared with the concentrate in this lineup, Siloxa-Tek 8500 is ready to use, but the listed coverage per gallon is lower. It may be a practical choice when you want a straightforward application and a natural finish, especially on surfaces exposed to road salts or winter conditions. The product can be applied with a sprayer, roller, or brush according to its supplied description.
Pros:
- Ready to use, with no dilution step listed.
- Designed to preserve the surface’s natural appearance.
- Non-film-forming and breathable, according to the product details.
- Listed for water, salt, and freeze-thaw protection.
Cons:
- Coverage is up to 250 square feet per gallon per coat, so larger areas may require multiple gallons.
- It will not provide the color-enhancing wet look of an acrylic coating.
Verdict: Siloxa-Tek 8500 is a strong fit if you want a ready-to-use penetrating sealer for natural-looking concrete or masonry exposed to water and deicing salts.
4. Foundation Armor AR350: Low-Gloss Wet-Look Acrylic Sealer
AR350 differs from the penetrating sealers in this guide. It is a solvent-based acrylic that forms a low-gloss finish and darkens concrete or pavers for a wet-look effect. If you want to keep the surface looking unchanged, this is probably not the right pick; if you want stronger color and sheen, its finish is the main draw.
The product is intended for exterior surfaces, including poured and broom-finished concrete, stamped concrete, and concrete pavers. It is listed for unsealed surfaces and surfaces previously sealed with a solvent-based acrylic. That compatibility detail matters: do not assume it can be applied over every existing sealer. The supplied description lists application by roller or sprayer and coverage of about 175–225 square feet per gallon.
AR350 may suit a patio, walkway, or driveway where appearance is as important as surface protection. Its coating helps guard against water absorption, abrasion, traffic, road salts, UV rays, snow, and ice, according to the product details. Because it is solvent-based and leaves a finish, surface preparation and compatibility checks are especially important before application.
Pros:
- Adds a low-gloss wet look and enhances surface color.
- Listed for several exterior concrete finishes and pavers.
- Ready to use and can be applied with a roller or sprayer.
- Designed to protect against water, abrasion, salts, and exposure to the elements.
Cons:
- Changes the appearance, so it is not a natural-look option.
- Compatibility is limited to unsealed surfaces or those previously treated with a solvent-based acrylic, according to the supplied details.
Verdict: Pick AR350 when you want a color-enhancing wet-look finish on compatible exterior concrete or pavers, not when your priority is invisible protection.
5. MasonryDefender Concrete Sealer: Clear Driveway and Patio Protection
MasonryDefender is a penetrating silane-siloxane sealer intended to repel water without leaving a glossy surface film. Its stated use focuses on driveways, sidewalks, and patios, where a clear, non-glossy finish can protect concrete without adding a wet-look effect.
The product is designed to let concrete breathe while limiting water infiltration. Its listed protection includes pitting, cracking, ice-melt salts, chloride ions, freeze-thaw cycles, and efflorescence stains. Apply it only after thoroughly cleaning the concrete, as directed. The supplied application guidance calls for a low-pressure garden sprayer and lists coverage of about 90–150 square feet per gallon.
Compared with Siloxa-Tek 8500, MasonryDefender has a lower stated coverage range per gallon, while both are penetrating silane-siloxane options designed to preserve a natural appearance. It may be appealing if you want a simple driveway- or patio-focused choice, but use the coverage range to estimate materials rather than assuming one gallon will cover a large area.
Pros:
- Clear, non-glossy protection that does not create a surface film.
- Designed to repel water while allowing concrete to breathe.
- Listed for outdoor concrete exposed to salts and freeze-thaw cycles.
- Application details specify a low-pressure garden sprayer.
Cons:
- Listed coverage is about 90–150 square feet per gallon.
- Thorough cleaning is required before application.
Verdict: MasonryDefender is a practical option for a clear, penetrating sealer on a driveway, sidewalk, or patio when you do not want to change the surface’s appearance.
How to Choose a Concrete Sealer and Waterproofer
Decide Between a Penetrating Sealer and a Surface Coating
Penetrating sealers soak into concrete or masonry and are designed to limit water entry without leaving a surface film. They are usually the better match when you want to retain a natural look. An acrylic coating such as AR350 sits on the surface and adds a low-gloss wet look. Choose based on the finish you want, not just the word “sealer” on the label.
Match the Formula to the Surface
Check whether the product is listed for your material and whether your concrete is already sealed. Some products in this guide are specified for unsealed surfaces, while AR350 is listed for unsealed concrete or surfaces previously treated with a solvent-based acrylic. If you do not know what is on the surface, identify the existing coating before applying another product.
Consider the Main Exposure
Think about what your concrete needs protection from. A driveway in a region that uses deicing salts may call for a product designed to resist salt-related damage. A patio exposed to rain may need water repellency, while a damp basement may raise broader moisture concerns. A sealer can help reduce water intrusion, but it should not be treated as a fix for structural damage or an active leak.
Compare Coverage and Preparation Needs
Use the listed coverage to estimate how much product you may need, but treat it as a guide. The texture, porosity, and condition of your concrete can affect coverage. Also account for whether the product is ready to use or needs dilution, and follow its instructions for cleaning, application, and drying before exposing the surface to water or traffic.
Choose the Finish You Can Maintain
A natural-look penetrating treatment avoids a glossy coating, while a wet-look acrylic changes the surface color and sheen. Consider how that finish will look across the whole area, not just on a small patch. For a coating, check the product directions for maintenance and resealing. For any sealer, apply a small test area if you are unsure how it will look on your concrete.
Follow the Product Label for Application and Safety
Application methods differ: the products listed here include sprayer, roller, and brush options. Read the current label for surface preparation, compatible materials, application conditions, and safety precautions. Do not mix products or apply a new sealer over an existing coating unless the product directions allow it.
Frequently Asked Questions
Does concrete sealer make concrete completely waterproof?
No sealer should be assumed to make concrete completely waterproof in every condition. These products are designed to reduce water or moisture intrusion, repel water, or form a protective coating. The right product depends on the surface and the source of moisture, and a sealer will not repair cracks or solve every drainage problem.
What is the difference between a penetrating sealer and an acrylic sealer?
A penetrating sealer works below the surface and is generally chosen to preserve a natural appearance. An acrylic sealer forms a surface coating and can add color and sheen. AR350 is the coating-style option in this lineup; the other picks are penetrating treatments.
Which option keeps concrete looking natural?
Foundation Armor SX5000 WB, Ghostshield Siloxa-Tek 8500, and MasonryDefender are described as natural-look or clear penetrating sealers. Lithi-Tek 9500 is also a penetrating treatment, while AR350 is specifically designed to darken and enhance the surface.
Can I apply a sealer over concrete that is already sealed?
Only if the product is compatible with the existing sealer. AR350 is listed for unsealed surfaces and surfaces previously treated with a solvent-based acrylic. SX5000 WB is listed for unsealed surfaces. Check the product label and identify the existing coating before proceeding.
How much sealer should I buy?
Measure the area you want to cover, then compare it with the product’s stated coverage. The listed rates in this guide range from about 90–150 square feet per gallon for MasonryDefender to up to 250 square feet per gallon per coat for Siloxa-Tek 8500. Coverage can vary by surface, and Lithi-Tek 9500 is a concentrate that makes five gallons when mixed as directed.
Can I use these products on brick or pavers?
Some of them are listed for more than concrete. SX5000 WB and Siloxa-Tek 8500 are specified for brick and pavers, while AR350 is listed for concrete pavers. Check the product directions for the exact surface and existing sealer before applying.
Final Recommendation
For a ready-to-use, natural-look treatment with stated coverage and protection against water and deicing salts, Ghostshield Siloxa-Tek 8500 is the most versatile fit in this group. Choose Lithi-Tek 9500 if you prefer a concentrate focused on densifying concrete and reducing moisture intrusion. If you want color enhancement and a wet-look finish, Foundation Armor AR350 is the clear alternative—but it changes the appearance and requires compatible surface conditions.