Made-to-order cupboard doors can refresh a kitchen or bathroom without replacing the cabinet boxes, but the right choice depends on more than style. Measure carefully, match the door profile to your existing cabinets, and check size limits and finishing needs before ordering. These three unfinished, custom-sized wood options cover a classic square raised-panel look and a traditional cathedral arch.
Table of Contents
Quick Comparison
| Product | Style and build | Best for | Important consideration |
|---|---|---|---|
| Xpress Adobe Replacement Cabinet Door | 3/4-inch solid wood frame and panel | Custom-sized replacement with a straightforward Adobe profile | Unfinished; doors over 26 inches wide or 70 inches tall have no warranty |
| Xpress Liberty Cathedral Arch Door | 3/4-inch solid hardwood with raised panel and cathedral arch | Replacing a traditional arched cabinet door | Check the profile and size limits against your existing door |
| Xpress Revere Traditional Door | 3/4-inch solid hardwood with square frame and raised panel | Replacing a classic square raised-panel door | Unfinished; doors over 26 inches wide or 70 inches tall have no warranty |
Our Picks: Best Cupboard Doors Made To Order reviews
Best for a Custom-Sized, Classic Adobe Profile: Xpress Adobe Replacement Cabinet Door
The Xpress Adobe door is a made-to-order replacement with a 3/4-inch solid wood frame and panel. It can be sized to the nearest 1/16 inch, a useful level of detail when you need a door to line up with an existing cabinet run. Its standard stiles and rails are 2 1/4 inches wide.
It arrives unfinished and sanded, so you can choose paint, stain, or a clear coat to suit your room. That flexibility also means you need to plan for the finishing work yourself. The listed specifications call for a center rail at 50 inches and above unless you request otherwise. If you select boring, a center bore is added at 36 inches and above.
This is a sensible option if you want a custom-size solid wood door and its Adobe profile matches your cabinets. Check the profile against your existing doors before ordering; a precise fit alone will not make a different door style blend in. The size warranty limitation is also important: doors over 26 inches wide or 70 inches tall are not covered by a warranty.
Pros:
- Custom sizing to the nearest 1/16 inch
- 3/4-inch solid wood frame and panel construction
- Unfinished, sanded surface is ready for your chosen finish
- Made in the USA, according to the product details
Cons:
- You must finish the door to match your cabinets
- No warranty for doors over 26 inches wide or 70 inches tall
Verdict: Choose the Adobe if its profile suits your cabinetry and you want a custom-sized solid wood door that you can finish yourself.
Best for Traditional Cathedral Cabinets: Xpress Liberty Cathedral Arch Door
The Liberty has a raised center panel and a peaked cathedral arch across the top rail. That distinctive outline makes it the most style-specific option in this group: it is intended to replace an existing arched door, rather than serve as a generic match for any cabinet. Its frame and raised panel are made from 3/4-inch solid hardwood, with cope-and-stick joinery.
The door is made to order and arrives raw, sanded to 180 grit, and ready for paint, stain, glaze, or clear coat. The product details give a minimum size of 9.5 by 9.5 inches and a maximum of 26.25 by 72 inches. The top rail is 4.25 inches at its tallest points, and a center rail is added at 48 inches and above unless you request otherwise.
The Liberty is designed for face-frame or frameless cabinets and lists compatibility with standard 1/2-inch overlay, full-overlay, and inset configurations. Still, measure the existing door and confirm the arch shape, dimensions, and mounting arrangement before ordering. Doors over 26 inches wide or 70 inches tall have no warranty, even though the listed maximum height is 72 inches.
Pros:
- Distinct cathedral arch and raised-panel design
- Made-to-order sizing for replacement projects
- Solid hardwood construction with cope-and-stick joinery
- Raw, precision-sanded surface is ready for finishing
Cons:
- The arched profile will not match square-top cabinet doors
- Some sizes within the stated range are outside the warranty limits
Verdict: Pick the Liberty when you need to replace a cathedral-arch door and have confirmed that its shape and dimensions match the rest of your cabinets.
Best for a Square Raised-Panel Replacement: Xpress Revere Traditional Door
The Revere is a traditional square-frame door with a raised center panel. Its 3/4-inch solid hardwood construction and standard 2 1/4-inch stiles and rails make it a direct style match to look for when replacing a similar door. The product details describe precision cope-and-stick joinery and custom sizing to the nearest 1/16 inch.
It arrives unfinished and pre-sanded, giving you the choice to paint, stain, or apply a clear protective sealer. The description notes that the pictured door is red oak with a clear finish, but the replacement itself is sold unfinished. Check the available wood selection and finish needs on the product listing before you order if you are trying to match existing cabinetry.
The stated size range runs from 8 by 8 inches up to 30 by 72 inches. A center rail is added at 50 inches and above unless requested otherwise, and a center bore is added at 36 inches and above if you select boring. As with the Adobe, doors over 26 inches wide or 70 inches tall are not covered by a warranty. Compared with the Liberty, the Revere is the better profile match for square-top, raised-panel cabinets.
Pros:
- Classic square frame and raised center panel
- Custom sizing to the nearest 1/16 inch
- Solid hardwood construction and unfinished surface
- Listed size range starts at 8 by 8 inches
Cons:
- Requires painting, staining, or another finish
- No warranty for doors over 26 inches wide or 70 inches tall
Verdict: The Revere is a strong choice for replacing a square raised-panel door when you can confirm the measurements, wood selection, and finish will work with your cabinets.
How to Choose Made-to-Order Cupboard Doors
Measure the Existing Door Carefully
For a replacement, measure the door you are matching rather than relying only on the cabinet opening. Record its width and height, and note any unusual shape or profile. The products listed here offer custom sizing, but each has its own minimum and maximum dimensions. Recheck your measurements before submitting them, especially if you are ordering several doors.
Match the Door Profile
Look at the shape of the top rail and the center panel. The Liberty has a cathedral arch, while the Revere has a square frame with a raised panel. The Adobe is another made-to-order frame-and-panel option. A difference in arch, panel, or rail proportions can stand out even when the door fits the cabinet opening.
Check the Size and Warranty Limits
Compare your measurements with the exact product limits before ordering. The Liberty lists a maximum of 26.25 by 72 inches, while the Revere lists a maximum of 30 by 72 inches. However, both the Liberty and Revere specify no warranty for doors over 26 inches wide or 70 inches tall; the Adobe has the same stated warranty exclusions. Confirm how those limits apply to your planned size.
Choose a Finish Plan
All three options are unfinished, so they need paint, stain, glaze, or a clear coat after delivery. Consider how you will match the existing cabinet color and whether you can finish the door before installation. An unfinished surface gives you flexibility, but it does not arrive ready to hang as a finished door.
Review Boring and Hardware Needs
The product descriptions mention boring options and specify when a center bore is added, but they do not establish that hinges or other hardware are included. Check the listing details and compare the boring setup with your existing doors and hardware before ordering. If you are unsure, confirm the required placement before submitting the custom measurements.
Account for Rails and Door Height
Taller doors may have a center rail added by default. The Adobe and Revere list a center rail at 50 inches and above, while the Liberty lists one at 48 inches and above. If the added rail would affect the look you need, check the product instructions for how to request a different arrangement.
Frequently Asked Questions
Are these cupboard doors sold finished?
No. The product details describe all three as unfinished. They arrive prepared for finishing, but you will need to apply your chosen paint, stain, glaze, or clear coat.
How should I measure for a replacement door?
Measure the existing door’s width and height, and note its profile and hardware arrangement. Compare those measurements with the selected product’s size range. If you are replacing a missing door, measure a matching door on the same cabinet run when possible.
Which option has a cathedral arch?
The Xpress Liberty has a peaked cathedral arch top rail and a raised center panel. The Revere has a square frame and raised panel, so it is a different style.
Are the doors made from solid wood?
The Adobe is described as a 3/4-inch solid wood frame and panel. The Liberty and Revere are described as 3/4-inch solid hardwood construction. Check the product listing for the available wood selection and exact configuration.
Do the doors include hinge hardware?
The supplied product details do not confirm that hinges or other hardware are included. Check the listing and confirm whether the boring option matches your installation needs before ordering.
Can I order a door larger than the stated warranty limit?
The listed size ranges and warranty limits are not the same for every product. The Adobe and Revere specify no warranty for doors over 26 inches wide or 70 inches tall. The Liberty lists a maximum size of 26.25 by 72 inches but also excludes doors over 26 inches wide or 70 inches tall from warranty coverage. Verify the limits for your exact dimensions before purchase.
Final Recommendation
Choose the Liberty if your existing cupboard doors have a cathedral arch, the Revere for a square raised-panel style, or the Adobe if its profile best matches your cabinets. Before ordering any of them, double-check your measurements, confirm the finish and boring requirements, and review the size and warranty details for the specific door.
