Finding the best deepest 60-inch alcove soaking tub means looking past the outside height: the depth of the bathing well, the overflow position, and the tub’s usable interior all affect how deep a soak feels. Of these options, the WOODBRIDGE standard alcove tub lists the greatest interior depth, while the Kingston Brass model offers a wider footprint and a stated water depth to the overflow. Compare your room, drain location, and installation needs before choosing.
| Product | Configuration | External size | Depth information | Best for |
|---|---|---|---|---|
| Kingston Brass Aqua Eden 60-Inch Alcove Tub | Alcove, left drain | 60 x 36 inches | 14-3/8 inches to overflow | Bathing space and stated water depth |
| Fine Fixtures 60 x 30-Inch Alcove Soaking Tub | Alcove, left drain | 60 x 30 x 21.5 inches | 56-gallon capacity; bathing depth not stated | A standard-size alcove with a lumbar slope |
| WOODBRIDGE 60-Inch Acrylic Alcove Soaking Tub | Alcove, left drain | 60 x 30 x 21-5/8 inches | Interior depths listed as 16-1/8 and 16-7/8 inches | A deeper documented interior and added armrests |
| WOODBRIDGE 60-Inch Heated Whirlpool Alcove Tub | Alcove whirlpool, left drain | 60 x 30 x 21-5/8 inches | Interior depths listed as 16-1/8 and 16-7/8 inches | Jet bathing and water temperature support |
| Empava 59-Inch Freestanding Soaking Tub | Freestanding, center drain | 59.1 x 29.5 inches | 15-inch soaking depth | A freestanding alternative, not an alcove tub |
Table of Contents
Our Picks: Best Deepest 60 Inch Alcove Soaking Tub reviews
1. Kingston Brass Aqua Eden: A Wider Alcove Tub with a Stated Water Depth
The Kingston Brass Aqua Eden is a three-wall alcove tub with a glossy white finish, an integral apron, and a left-hand drain. Its 60-by-36-inch footprint is wider than the other 60-inch alcove options here, so make sure the extra width fits your bathroom before ordering.
Its listed water depth is 14-3/8 inches to the overflow, and its stated capacity is 60.85 gallons. That gives you a useful comparison point, although water depth to the overflow is not the same as the depth of the tub’s interior floor. The acrylic construction is reinforced with fiberglass and resin, and the unit has a tile flange for a three-wall alcove installation.
This is a strong choice if you want a roomy tub and value having a stated water-depth measurement. The trade-off is that it is wider than a typical 30-inch tub, and its stated water depth is below the interior-depth figures listed for the WOODBRIDGE models. Check your framing, drain position, and plumbing plan before committing.
Pros:
- Water depth to overflow is listed as 14-3/8 inches.
- Wide 36-inch footprint and stated 60.85-gallon capacity.
- Three-wall alcove design includes a tile flange and apron.
- Left-hand drain and glossy white finish.
Cons:
- The 36-inch width may not fit alcoves designed for a 30-inch tub.
- Its listed water depth is not as deep as the WOODBRIDGE models’ stated interior measurements.
Verdict: Choose the Aqua Eden if your alcove can accommodate its wider footprint and you want a tub with a clearly stated water depth to the overflow.
2. Fine Fixtures 60 x 30-Inch Tub: A Practical Standard-Size Alcove Pick
This Fine Fixtures model has a familiar 60-by-30-inch footprint, a built-in apron, and a left-hand drain. Its listed height is 21.5 inches, and the stated capacity is 56 gallons. The product information describes an acrylic and fiberglass construction, a glossy white finish, and a sloped lumbar area intended to support your back while bathing.
The tub is listed for alcove installation and includes a tile flange, overflow hole, and adjustable legs. Those features can help with fitting and leveling, but installation still needs to match your bathroom’s framing and plumbing. The product details do not provide a bathing-depth measurement, so capacity alone cannot tell you how deep the water will sit around your body.
Consider this option if you want a standard-width alcove tub with a back-supporting shape and do not need a precise depth figure before buying. If maximum soaking depth is your top priority, the lack of a stated interior depth makes it harder to compare directly with the WOODBRIDGE tubs.
Pros:
- Standard 60-by-30-inch alcove footprint.
- Sloped lumbar area is designed for back support.
- Includes a tile flange, overflow hole, and adjustable legs.
- Listed capacity is 56 gallons.
Cons:
- Bathing depth is not provided in the product details.
- The listing describes the material in different ways, so confirm the exact construction with the seller if it matters to you.
Verdict: The Fine Fixtures tub is a reasonable standard-size option when a lumbar slope and included installation components matter more than having a published soaking-depth measurement.
3. WOODBRIDGE Acrylic Alcove Tub: The Strongest Depth Pick on Paper
This WOODBRIDGE tub has a 60-by-30-inch exterior, a left-side drain, an integral apron, and a three-sided tiling flange. Its listed interior dimensions include depths of 16-1/8 and 16-7/8 inches, making it the strongest documented depth choice in this group. The listing also gives a 54-1/2-by-24-inch interior and a 41-3/4-by-17-3/4-inch seating area.
The tub is made from high-gloss acrylic reinforced with resin and fiberglass. Other practical details include molded armrests, a textured floor, and a brass pop-up drain with a stainless steel overflow. Those features can add comfort and convenience, but they do not change the importance of checking the drain side and the available alcove dimensions.
One installation limit deserves attention: the product information says its threshold does not accommodate WOODBRIDGE bathtub shower doors and that the alcove tub is intended for use with a shower rod and curtain. If you plan to use a glass door, confirm compatibility before purchasing. Also, the listed interior depths are measurements of the tub, not a guaranteed water depth to the overflow.
Pros:
- Two interior depth measurements are listed, including 16-7/8 inches.
- Standard 60-by-30-inch exterior footprint.
- Integrated armrests, textured floor, apron, and tiling flange.
- Includes a pop-up drain and stainless steel overflow.
Cons:
- Product information says the tub is not compatible with WOODBRIDGE shower doors; a curtain is specified instead.
- Interior depth measurements do not state the water depth at the overflow.
Verdict: For a conventional alcove setup, this is the best-supported choice if you are prioritizing a deeper listed interior and are comfortable using a shower curtain.
4. WOODBRIDGE Heated Whirlpool Tub: A Deeper Alcove Option with Jets
This jetted model shares the 60-by-30-inch exterior and the listed 16-1/8- and 16-7/8-inch interior depths of the standard WOODBRIDGE tub. It adds three small jets, six large jets, an inline heater, and seven-color LED lighting. The heater is designed to maintain the water temperature at 100°F, and the product details say it activates with the pump.
The tub has a left drain, a three-sided tiling flange, a non-slip floor, and an access panel for internal components. Its high-gloss acrylic is reinforced with resin and fiberglass. The drain and overflow are included, and the product information calls for two 110–120V, 15-amp GFCI breakers. Electrical planning is essential here, so have a qualified installer confirm that your bathroom can support the required setup.
Choose this model for the added whirlpool features, not simply because you want the deepest soak. Its listed interior depths match the standard WOODBRIDGE model, and the jets, heater, and electrical needs make it a more involved installation. The product information says this model is compatible with WOODBRIDGE 60-inch shower doors.
Pros:
- Listed interior depths reach 16-7/8 inches.
- Includes nine adjustable jets and an inline heater.
- Removable access panel helps reach internal components.
- Includes a drain and overflow, with a non-slip floor.
Cons:
- Requires two dedicated 110–120V, 15-amp GFCI breakers, according to the listing.
- More complex to install than a standard soaking tub.
Verdict: Pick this WOODBRIDGE model if you want a deep alcove tub with jets and heated water and can accommodate its electrical requirements.
5. Empava 59-Inch Freestanding Tub: A Soaking Alternative, Not an Alcove Fit
The Empava is included as a useful comparison, but it is not an alcove tub. It is a freestanding model with a 59.1-by-29.5-inch footprint, an oval shape, and a stated 15-inch soaking depth. It also has a center drain, an overflow, adjustable leveling feet, and an anti-slip bottom.
Its double-wall acrylic construction is designed to help retain warmth, and the listing gives a 45-gallon capacity. The faucet is installed externally, so you will need to plan for a compatible faucet location rather than an alcove wall-mounted setup. Its dimensions are close to 60 inches long, but the freestanding design requires a different bathroom layout and installation approach.
This tub may suit you if you are considering a standalone centerpiece and want a stated soaking depth. It is not the right pick if your project requires a tub that fits between three alcove walls.
Pros:
- 15-inch soaking depth is stated in the product details.
- Includes a center drain and overflow.
- Adjustable feet help with leveling.
- Freestanding design can suit bathrooms without a built-in alcove.
Cons:
- It is freestanding, not an alcove tub.
- Requires an externally installed faucet and a suitable standalone layout.
Verdict: Consider the Empava only if a freestanding tub will work in your bathroom; it does not meet a strict alcove-tub requirement.
How to Choose a Deep 60-Inch Alcove Soaking Tub
Compare bathing depth, not just outside height
A tub’s exterior height does not tell you how much water it holds around your body. Look for interior-depth and water-depth measurements, and check where each measurement is taken. For example, the WOODBRIDGE listings provide interior depths, while the Kingston Brass listing gives water depth to the overflow. Those figures describe different things, so they should not be treated as identical.
Measure the alcove and confirm the drain side
Measure the finished space between the walls, its width, and the room available in front of the tub. Most options here are 60 by 30 inches, but the Kingston Brass tub is 60 by 36 inches. Confirm whether you need a left-hand or right-hand drain before ordering, and compare the tub’s drain location with your existing plumbing.
Check the bathing well and comfort features
A deeper well may let you sit in more water, but your comfort also depends on the interior shape, seat area, back slope, and arm support. The WOODBRIDGE standard tub has molded armrests, while the Fine Fixtures model lists a sloped lumbar area. If possible, compare interior measurements and the tub’s shape with your own bathing preferences.
Review the flange, apron, and shower setup
Alcove tubs are installed against surrounding walls, so the apron and tile flange need to match your planned wall finish. Also check whether you intend to use a curtain or shower door. The standard WOODBRIDGE alcove model is described as unsuitable for its shower doors, while the jetted WOODBRIDGE listing says it works with WOODBRIDGE 60-inch doors. Confirm door compatibility with the exact tub and door model.
Plan for weight, access, and installation
Make sure the tub can be moved through your home and into the bathroom, and ask your installer to check the floor, framing, leveling, and plumbing requirements. The Kingston model lists a weight of 66.2 pounds, the Fine Fixtures tub lists 65 pounds, and the WOODBRIDGE jetted model lists 99 pounds. Those are product weights, not the total weight when filled with water and occupied.
Account for electrical needs on jetted models
A standard soaking tub does not have the same electrical needs as a heated whirlpool. The WOODBRIDGE jetted model specifies two 110–120V, 15-amp GFCI breakers. Confirm the electrical plan with a qualified professional before buying, and include access for servicing the pump and other internal parts.
Use capacity as a secondary comparison
Capacity can help you compare tubs, but it does not show exactly how deep the water will be during a bath. The listings state 60.85 gallons for the Kingston, 56 gallons for the Fine Fixtures model, and 45 gallons for the Empava. Compare those numbers alongside the interior dimensions, overflow position, and your bathroom’s water-heating needs.
Frequently Asked Questions
Which listed 60-inch alcove tub has the deepest stated interior?
The standard WOODBRIDGE alcove tub and its heated whirlpool counterpart both list interior depths of 16-1/8 and 16-7/8 inches. These are interior measurements, not stated water depths to the overflow.
Is the Kingston Brass tub deeper than the WOODBRIDGE tubs?
The Kingston Brass listing states 14-3/8 inches of water depth to the overflow. The WOODBRIDGE listings provide interior-depth measurements instead. Because those measurements are not the same type, they do not allow a direct water-depth comparison.
Does a 60-inch tub always fit a 60-inch alcove?
No. Check the exact product dimensions and your finished alcove measurements. You will also need to confirm framing, wall finish, drain position, and how the tub will be moved into the room.
Can I install a shower door on the standard WOODBRIDGE alcove tub?
The product information for the standard WOODBRIDGE model says it will not accommodate WOODBRIDGE bathtub shower doors and specifies a shower rod and curtain. Confirm compatibility if you plan to use a door from another brand.
Is the Empava tub an alcove model?
No. The Empava is a freestanding tub with a center drain and an externally installed faucet. It is an alternative for a different bathroom layout, not a direct alcove replacement.
What should I verify before ordering a jetted tub?
For the WOODBRIDGE heated whirlpool, confirm that the bathroom can support the listed two 110–120V, 15-amp GFCI breakers. Also plan for access to the internal components and confirm installation requirements with a qualified professional.
Which tub is the best overall choice for a deeper alcove soak?
The standard WOODBRIDGE acrylic alcove tub is the strongest match based on the supplied depth information: it has a conventional 60-by-30-inch footprint and the highest listed interior-depth figure among the alcove models. If you need an explicitly stated water depth to the overflow, compare that measurement with your preferences before making a final choice.
Conclusion
For a standard 60-by-30-inch alcove and the deepest documented interior in this selection, the WOODBRIDGE acrylic soaking tub is the clearest fit, provided a shower curtain works for your setup. Choose the heated whirlpool version if you also want jets and can meet its electrical requirements. The Kingston Brass tub is worth considering if you have room for its wider 36-inch footprint and prefer a stated water depth to the overflow. Always verify the measurements, drain location, and installation details with your contractor before ordering.
