Product reviewDoors, Windows & Floors

Best Double Door Handle Lock Sets: Compare Finishes, Fit, and Features

Updated 10 min read

Reader-supported: when you buy through links on our site, we may earn an affiliate commission at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases. Learn more.

Choosing the best double door handle lock starts with matching the hardware to your door—not just picking a finish. These sets typically pair a working, keyed handle with a second dummy handle for the other door, so check which side locks and measure the door thickness, backset, and hole spacing before you buy. Our picks cover several finishes and fit ranges, with a few important differences to keep in mind.

Quick Comparison

ProductLock setupFit detailsBest for
NEWBANG Satin Nickel Double Door Handle Lock SetKeyed active handle and dummy handle1⅜–2-inch doors; adjustable backset; 8⅓–9⅚-inch hole spacingSatin nickel style and a wider door-thickness range; listing marked unavailable in the supplied product data
Antique Brass Double Front Door Lock SetDeadbolt handle set with dummy handle1⅜–1¾-inch doors; 2⅜- or 2¾-inch backsetA traditional-looking finish, after confirming the actual color
Camtek Matte Black Double Door Handle and Deadbolt SetKeyed handle and deadbolt; same key for both1⅜–1¾-inch doors; 2⅜- or 2¾-inch backsetMatching matte black hardware with reversible handing
Goldenwarm Black Double Door Handle SetHandle set with dummy handle1⅜–1¾-inch doors; 7⅞–9 1/16-inch handle-hole spacingModern black hardware and adjustable handle spacing
Probrico Oil-Rubbed Bronze Double Door Handle SetKeyed entry set and non-locking dummy set1⅜–1¾-inch doors; 2⅜- or 2¾-inch backsetA coordinated bronze pair with installation templates

Our Picks: Best Double Door Handle Lock reviews

1. NEWBANG Satin Nickel Set for Adjustable Hole Spacing

The NEWBANG set pairs a keyed entry handle for the active door with a decorative, non-locking dummy handle for the second door. The active handle locks with a key from outside or a thumb turn from inside. Satin nickel offers a neutral finish that can suit a range of entry-door styles.

Its main practical advantage is adjustability. The handle-hole spacing can be set from 8⅓ to 9⅚ inches, while the latch and deadbolt support either a 2⅜- or 2¾-inch backset. The stated door-thickness range is 1⅜ to 2 inches, which is broader than the ranges listed for most of the other picks.

The handle is reversible for left- or right-handed doors, and the product details describe a screwdriver-based installation. Still, measure your existing holes carefully and use the supplied template before drilling or tightening hardware. The listing is marked unavailable in the product data provided, so check its current availability before planning a purchase.

Pros:

  • Keyed active handle and matching dummy handle in one set
  • Adjustable handle-hole spacing and backset
  • Fits the widest stated door-thickness range in this roundup
  • Reversible for left- or right-handed doors

Cons:

  • Marked unavailable in the supplied product information
  • Its larger spacing range still needs to match your door’s existing holes

Verdict: Consider this set if its satin nickel finish and broad fit range suit your door, but confirm availability and measurements first.

2. Antique Brass-Style Double Door Set with Deadbolt

This double-door set is presented as a front-door handle with a deadbolt and a dummy handle for the other side. Its stated construction is zinc alloy with an electroplated finish. That combination may appeal if you want a traditional metal look without choosing a basic satin or matte-black style.

There is a notable finish discrepancy in the supplied product details: the title calls the finish antique brass, while the description also refers to a deep matte black finish. Because the color is central to choosing entry hardware, check the product listing images and selection details before ordering rather than relying on the wording alone.

The set is specified for doors 1⅜ to 1¾ inches thick and supports 2⅜- or 2¾-inch backsets. The listed distance from the key cylinder center to the handle center is 5-31/64 inches, so compare that measurement with your door preparation. The description recommends careful alignment during installation.

Pros:

  • Includes a deadbolt handle set and a dummy handle
  • Supports two common backset sizes
  • Zinc-alloy construction with an electroplated finish
  • Designed for standard 1⅜- to 1¾-inch door thicknesses

Cons:

  • The supplied title and description give conflicting finish information
  • Check the stated cylinder-to-handle spacing against your door before buying

Verdict: This may work for a standard-thickness door if its layout fits, but verify the finish and included handle configuration before choosing it.

3. Camtek Matte Black Set with Matching Keyed Deadbolt

The Camtek set is designed for double front doors, French doors, or double garage doors. Its matte black finish and reversible handle shape offer a clean, coordinated look for left- or right-handed door setups. The product details describe zinc-alloy construction and a coating intended to resist peeling.

The keyed handle and deadbolt use the same keys, so you do not need to manage separate keys for those two locking points. The deadbolt and latch adjust for 2⅜- or 2¾-inch backsets, and the set is specified for doors 1⅜ to 1¾ inches thick. Its through-bolt slides to accommodate a stated spacing range, which may help when replacing hardware, though existing holes still need to line up.

Installation calls for careful alignment, and the key must be turned back to its starting position before it can be removed. That detail is worth noting if you are used to a different lock operation. The product information does not state a security grade, so treat the listed materials and lock functions as specifications—not as a rating of resistance to forced entry.

Pros:

  • Matching keyed handle and deadbolt use the same keys
  • Reversible design fits left- or right-handed doors
  • Adjustable latch and through-bolt spacing
  • Matte black zinc-alloy design suits coordinated exterior hardware

Cons:

  • Installation requires careful alignment
  • Key removal requires returning the key to its starting position

Verdict: Choose Camtek if you want a matte black set with one key for its handle and deadbolt, and your door matches its stated dimensions.

4. Goldenwarm Black Set with Adjustable Handle Spacing

Goldenwarm’s double-door set pairs a black handle with a dummy handle, giving both doors a coordinated appearance. The product description specifies zinc alloy and an electroplated finish with anti-corrosion treatment. Its simple black styling makes it a straightforward option for a modern entry.

The set supports 2⅜- or 2¾-inch backsets and doors 1⅜ to 1¾ inches thick. Its stated handle-hole spacing adjusts from 7⅞ to 9 1/16 inches. That range is useful only if it covers the distance between your door’s existing holes, so measure center to center before ordering.

The description says the active lock operates with a key from outside and a turn button from inside. It also stresses aligning the components during installation. Compared with the NEWBANG option, Goldenwarm has a narrower stated door-thickness range, but its specified handle spacing may suit doors with a shorter hole layout.

Pros:

  • Black finish and dummy handle create a coordinated pair
  • Adjustable handle spacing within the stated range
  • Supports two common backsets
  • Includes the front-door hardware for installation

Cons:

  • Fits only the stated 1⅜- to 1¾-inch door thickness
  • Careful component alignment is important during installation

Verdict: Goldenwarm is a practical option if you want black hardware and your door’s thickness, backset, and handle spacing match its specifications.

5. Probrico Oil-Rubbed Bronze Set with Keyed Entry

Probrico includes two handle sets: one keyed entry set and one non-locking dummy set for the second door. Its oil-rubbed bronze finish is aimed at shoppers who want a warmer alternative to black or satin nickel. The product details describe a thickened zinc-alloy build with a corrosion-resistant coating.

The listed fit is for doors 1⅜ to 1¾ inches thick, with a latch that adjusts for 2⅜- or 2¾-inch backsets. The bottom-plate screw spacing is stated as 197 to 234 mm. Check that measurement against your door’s preparation, especially if you are replacing an existing handleset rather than installing hardware on a new door.

The package is described as including hardware, templates, and an illustrated manual, which can make a do-it-yourself installation easier to plan. The product description also gives an operational-cycle durability claim, but that figure is a manufacturer-provided specification rather than a guarantee of how long the lock will last in your home.

Pros:

  • Includes a keyed entry set and a separate dummy set
  • Adjustable latch supports two backset sizes
  • Templates and an illustrated manual are specified as included
  • Oil-rubbed bronze finish offers a warmer style

Cons:

  • Door thickness is limited to the stated 1⅜- to 1¾-inch range
  • Bottom-plate screw spacing should be checked before purchase

Verdict: Probrico is a good fit to consider if you want a bronze-finish keyed-and-dummy pair and its plate spacing matches your door.

How to Choose a Double Door Handle Lock

Know which door needs to lock

Many double-door sets have one active handle that opens and locks, plus one dummy handle that provides a matching grip but does not lock. Confirm that the active, keyed set will go on the door you use. A dummy handle is not a second locking point, so check how your inactive door is secured and whether that setup meets your needs.

Measure door thickness and backset

Door thickness is the measurement from one face of the door to the other. Backset is the distance from the door edge to the center of the handle or lock bore. Many picks here support 2⅜- or 2¾-inch backsets, but the listed thickness ranges vary. Measure your door and compare both dimensions with the product details before ordering.

Check the distance between existing holes

For replacement hardware, measure from the center of one mounting hole to the center of the next. Product descriptions may call this handle spacing, hole spacing, or a related mounting distance. These measurements differ across the picks, so do not assume that an adjustable set will fit every existing layout. Use the manufacturer’s diagram to identify the exact points to measure.

Choose the right handing and key operation

Some sets are described as reversible for left- and right-handed doors. That can make installation more flexible, but follow the supplied instructions to set the handle correctly. Also check how the lock operates: several sets use a key outside and a thumb turn or turn button inside. Camtek specifies that its key must return to its starting position before removal.

Match the finish to nearby hardware

Finish names can be important when you are coordinating a front entry. Compare the product images and listing options with hinges, lights, and other door hardware. In particular, the supplied description for the antique-brass-style set also mentions matte black, so verify the selected finish before purchasing.

Plan for careful installation

The product descriptions generally call for a screwdriver and include installation hardware; some also specify a template or illustrated instructions. Even when a set is designed for do-it-yourself installation, alignment matters. Check the supplied diagram, confirm that the latch faces the correct way, and avoid forcing parts into misaligned holes. If your door preparation does not match the instructions, consult a qualified installer.

Do not treat material claims as a security rating

Zinc alloy, coatings, and keyed deadbolts describe materials or features, but the supplied product information does not provide a security grade for these sets. If security certification or a specific level of forced-entry resistance is important to you, look for clearly stated ratings and installation requirements before deciding.

Frequently Asked Questions

What is a double door handle lock set?

It is a coordinated hardware set for a pair of doors. Many sets include one active, locking handle and one dummy handle for the second door. Confirm the exact configuration because the dummy handle does not lock by itself.

Can I install one of these sets on either a left- or right-handed door?

Some of the listed products, including NEWBANG and Camtek, are described as reversible. Check the instructions for the specific model and follow them to orient the handle correctly.

How do I measure the backset?

Measure from the edge of the door to the center of the handle or lock bore, as shown in the product’s installation diagram. The sets here commonly list a choice of 2⅜ or 2¾ inches, but your door’s measurement must match.

Will these sets fit every double door?

No. Door thickness, backset, hole spacing, and mounting layout can vary. Measure your door and compare each dimension with the set’s stated fit range before buying.

Does a dummy handle lock the inactive door?

No. A dummy handle is non-locking and is mainly used to provide a matching handle on the second door. Check how the inactive door is held closed and secured separately.

Are the handles reversible?

Some products in this roundup are explicitly described as reversible, while the supplied details for others do not clearly confirm it. Check the individual product specifications and instructions if your door’s handing is a concern.

Final Recommendation

For the broadest stated door-thickness range and adjustable hole spacing, the NEWBANG set is a standout on specifications, though its supplied listing status is unavailable. Among the other options, Camtek is worth considering if you want a matte black keyed handle and deadbolt that use the same key; Probrico offers a keyed-and-dummy pair with installation templates. The right choice depends on your measurements, preferred finish, and which door needs to lock—verify those details before ordering.

Rate this post
Spread the love

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top