Product reviewDoors, Windows & Floors

Best Double Hung Window Locks: Fit Guide and Top Picks

Updated 9 min read

Reader-supported: when you buy through links on our site, we may earn an affiliate commission at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases. Learn more.

The best double-hung window lock is one that matches your window’s brand, material, and screw-hole spacing. A latch that looks close may not line up with the keeper or pull the sashes together properly. The options below range from replacement locks for specific Andersen windows to general-purpose sash locks, so check the fit details before choosing.

Quick Comparison

ProductBest ForKey Fit or Feature
Tobkuxk Metal Window Lock Replacement for AndersenCompatible Andersen double-hung windowsMetal replacement lock; screws included
Tobkuxk Upgraded Andersen Sash Lock and KeeperReplacing a lock and keeper togetherMetal kit with a protective vinyl insert
National Hardware N248-468 Sash LockBasic crescent-style replacementWhite zinc die-cast lock for double-hung windows
Prime-Line F 2574 Sash LockWood-window lock replacementDie-cast body with a cam-action hook
Prime-Line F 2768 Sash LockWindows needing a white-finish latchCam-action lock with specified hole spacing

Our Picks: Best Double Hung Window Locks reviews

1. Tobkuxk Metal Replacement Lock for Select Andersen Windows

This replacement lock is made for specific Andersen double-hung window lines: 200 Series Perma-Shield Narroline windows that are not Tilt-Wash, and 400 Series Tilt-Wash windows. That model distinction matters. Check your window style before ordering rather than relying on the brand name alone.

The lock uses zinc alloy with reinforced steel springs, and the package includes four painted screws. The metal construction may be a useful alternative if your original hardware is damaged or you want to replace a worn lock. Installation is intended to be a straightforward swap using a Phillips screwdriver, provided the lock matches your window and mounting points.

Unlike a kit that includes a separate keeper, this listing describes a replacement lock with screws. If the keeper on your sash is also worn, make sure the existing part is in good condition and compatible. This is a more model-specific choice than the general-purpose sash locks below.

Pros:

  • Designed for specified Andersen double-hung window lines
  • Zinc alloy body with reinforced steel springs
  • Painted mounting screws are included
  • Installation calls for a Phillips screwdriver

Cons:

  • Not a universal fit; window series and style need to match
  • Does not list a separate keeper in the package contents

Verdict: Choose this lock if you have a compatible Andersen window and need a metal replacement lock, but confirm the exact window style and keeper condition first.

2. Tobkuxk Andersen Sash Lock and Keeper Kit with Protective Insert

This kit includes a sash lock, a keeper, and four color-matched self-tapping screws. Replacing both pieces can be helpful when the old latch and its mating part are worn or no longer align well. The listing describes compatibility with 200 Series Perma-Shield Narroline and 400 Series Tilt-Wash double-hung windows, though its title emphasizes the 400 Series. Confirm the fit against your window and the existing screw holes.

The lock is made from zinc alloy and has a built-in vinyl insert intended to reduce metal-on-metal contact. That detail may help limit rubbing on the finish during regular locking. The kit’s screw heads are painted to blend with the lock body, which can give the replacement a tidier appearance.

Because it includes a keeper, this is a more complete replacement than the first Tobkuxk option. Still, the claimed fit is specific rather than universal. If your window is another brand or has different mounting points, a general sash lock with measured hole spacing may be a better place to look.

Pros:

  • Includes both the sash lock and keeper
  • Metal construction with a protective vinyl insert
  • Color-matched screws are included
  • Listing describes fit for select Andersen window lines

Cons:

  • Compatibility is limited to specified window models
  • Confirm the exact fit because the title and description emphasize different series

Verdict: This is the stronger option if you need to replace the lock and keeper together on a compatible Andersen window and want a protective insert between metal surfaces.

3. National Hardware White Crescent-Style Sash Lock

National Hardware’s N248-468 is a crescent-style sash lock intended for double-hung windows. Its basic design draws the window frames together when locked, which can help reduce rattling. It is made from zinc die-cast and comes in a white finish.

Mounting screws are included, and the listing says the lock is suitable for interior or exterior applications. The product information does not provide screw-hole measurements, so compare the lock with your existing hardware before buying. Matching the shape and mounting layout is important for a simple replacement.

This is a less specialized option than the Andersen replacement kits. It may suit you if you need a conventional crescent latch and its dimensions match your window, but it does not include a separately listed keeper or advertise a model-specific fit.

Pros:

  • Crescent-style design made for double-hung windows
  • Zinc die-cast construction
  • White finish can suit light-colored window hardware
  • Mounting screws are included

Cons:

  • Specific hole spacing is not provided in the product details
  • Does not list a separate keeper as part of the package

Verdict: Consider this straightforward crescent lock when its shape and mounting points match your existing hardware; measure first if you are unsure.

4. Prime-Line F 2574 Cam-Action Sash Lock

The Prime-Line F 2574 uses a cam-action hook that pulls the keeper tight when you turn the lock. Its die-cast body has a brass finish, and the product information describes it for single- and double-hung windows. Anti-jimmy studs on the lock body are designed to engage the keeper.

This lock may be a fit for a wood window if the latch and keeper line up with your existing hardware. The listing details contain conflicting hole-spacing measurements: the title gives two measurements, while the description gives another. Check the product’s dimension drawing and compare it with your window before ordering rather than assuming any one measurement will match.

Mounting hardware is included, but no separate keeper is clearly listed in the supplied product details. That makes it important to inspect your existing keeper and verify that it can work with the new latch. Compared with the Andersen-specific kits, this is a broader replacement option, but its fit depends heavily on measurements.

Pros:

  • Cam-action hook pulls the keeper tight
  • Die-cast construction with a brass finish
  • Anti-jimmy studs engage the keeper
  • Mounting hardware is included

Cons:

  • Product details give inconsistent hole-spacing measurements
  • Check whether your existing keeper is compatible

Verdict: This lock is worth considering when you want a cam-action latch and can verify the dimensions against your window’s mounting layout.

5. Prime-Line F 2768 White Cam-Action Sash Lock

The Prime-Line F 2768 is a white-finish cam-action sash lock for vertical sliding windows, including single- and double-hung styles. Its cam mechanism is designed to pull the meeting rails together when locked. The body is die-cast zinc, and the listing provides specific hole-spacing measurements for the lock and keeper.

The stated lock-body spacing is 2-1/4 inches, with a 7/16-inch offset; the keeper has 2-3/16-inch spacing. These measurements make it easier to compare the product with your existing hardware, but the listing warns that it is not universal. Check both the lock and keeper layout before purchase.

This option stands out from the other general-purpose pick for its white finish and clearly stated dimensions. It may be a practical replacement when those details match your window, but it is not the right choice just because your window is double-hung.

Pros:

  • White finish and die-cast zinc body
  • Cam action draws the meeting rails together
  • Provides measurements for both lock and keeper spacing
  • Designed for vertical sliding window types

Cons:

  • Not a universal replacement
  • Requires careful measurement of both mounting patterns

Verdict: Choose the F 2768 if its white finish and specified lock-and-keeper dimensions match your existing setup; otherwise, look for a closer model-specific fit.

How to Choose a Double-Hung Window Lock

Confirm your window brand and style

Start by identifying the window brand, series, and sash style. Some replacement locks are made for specific window lines, while others are intended for a wider range of single- or double-hung windows. For Andersen windows, check whether your unit is a Narroline or Tilt-Wash style and compare that with the replacement’s stated compatibility.

Measure the lock and keeper

Measure the distance between the lock’s screw holes and compare the shape and position of the keeper. If the product gives separate measurements for the lock and keeper, check both. A latch can appear similar to your old one but still fail to align with the existing holes or catch properly.

Check whether you need a lock, a keeper, or both

Look at the full locking assembly before ordering. If the lock is broken but the keeper is intact and lines up correctly, a lock-only replacement may be enough. If the keeper is damaged, loose, or mismatched, a kit that includes both parts may save you from trying to pair new and old hardware.

Match the material and finish

Metal bodies, such as zinc alloy or die-cast zinc, are common among these options. Consider the existing window hardware and the appearance you want, but do not choose by finish alone. A close match in color is less useful than a lock that fits the sash and engages the keeper correctly.

Consider how the lock closes

Crescent-style locks and cam-action locks work differently, but both are designed to secure the meeting rails. A cam-action hook can draw the keeper tight as the latch turns. Choose a mechanism that matches your current hardware and works with your window’s sash arrangement.

Read the installation details before you begin

Some replacements include mounting screws and call for a Phillips screwdriver. Before removing the old lock, compare the replacement parts with the existing assembly and keep the keeper position in mind. If the new holes do not align or the lock does not engage smoothly, stop and recheck the fit rather than forcing the hardware.

Frequently Asked Questions

Are double-hung window locks universal?

No. Window locks can differ in shape, screw-hole spacing, keeper design, and window compatibility. Measure your existing hardware and check the replacement’s fit details before buying.

How do I know whether I need to replace the keeper too?

Inspect the keeper for damage, looseness, or poor alignment with the lock. If it is worn or the replacement lock will not engage it correctly, a kit that includes a new keeper may be the more complete choice.

Can I use an Andersen replacement lock on any Andersen window?

No. The Andersen options here list compatibility with particular window lines and styles. Check your window type and compare the mounting layout with the product details before ordering.

What is the difference between a crescent lock and a cam-action lock?

They use different latch shapes and closing actions. A crescent-style lock is a curved latch, while a cam-action design uses a cam or hook to pull the keeper tight. For a replacement, matching the existing mechanism and mounting points is usually the practical first step.

Do these locks require special tools to install?

The product details describe the Andersen replacements as installable with a Phillips screwdriver, and mounting screws are included with several options. Follow the instructions supplied with your chosen lock, and make sure the parts fit before fastening them in place.

Will a new sash lock stop drafts?

A lock that properly draws the sashes together may help them close tightly, but a lock alone cannot fix every source of drafts. Check the window’s fit and other sealing components if air still comes through after the lock is secured.

Final Recommendation

For a compatible Andersen double-hung window, the Tobkuxk lock-and-keeper kit is the most complete option in this group because it includes both mating parts. If your Andersen keeper is still in good shape, the lock-only replacement may be sufficient. For other window brands, compare the National Hardware and Prime-Line options by latch style, finish, and exact mounting measurements. Fit is the deciding factor: measure your current lock and keeper before ordering.

Rate this post
Spread the love

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top