A farmhouse clawfoot tub can give your bathroom a classic focal point, but the right choice depends on more than looks. Size, tub shape, faucet placement, and the room’s ability to accommodate cast iron all matter. These five tubs pair traditional claw feet with porcelain enamel over cast iron, with options ranging from a compact 54-inch roll-top design to a roomy 72-inch slipper tub.
Use the comparison below to narrow your choices, then check the listed dimensions and faucet setup before you buy. Product configurations can vary, so confirm the exact size and finish offered on the product page.
Table of Contents
Quick Comparison
| Tub | Style | Size noted in title | Faucet drillings |
|---|---|---|---|
| Cambridge Double Ended Clawfoot Tub | Double ended | 60 inches | Rim drillings |
| Charlotte Slipper Clawfoot Tub | Slipper | 72 inches | None |
| Randolph Morris Mila Slipper Clawfoot Tub | Slipper | 61 inches in title; other sizes listed | None |
| Heritage Classic Clawfoot Tub | Classic roll-top | 54 inches | Rim drillings |
| Randolph Morris Charlotte Slipper Clawfoot Tub | Slipper | 60 inches in title; other sizes listed | None |
Our Picks: Best Farmhouse Old Clawfoot Tub reviews
1. Cambridge 60-Inch Double-Ended Clawfoot Tub: Best for Two Comfortable Seating Ends
The Cambridge is a 60-inch double-ended tub with a rolled rim and imperial-style claw feet. Its two-ended shape is designed for bathing at either end, which gives it a different feel from a slipper tub with one raised back. The balanced profile also suits a bathroom where you want the tub to read as a traditional centerpiece from multiple angles.
Its construction is porcelain enamel over cast iron. The manufacturer describes cast iron as having strong heat retention, a useful trait for long soaks. This model has rim faucet drillings, so it is the most direct fit of these five if you want the faucet mounted on the tub rim. Check the drilling layout against your faucet before ordering.
The main trade-off is that a double-ended shape does not provide the same raised back support as a slipper design. Also, cast iron calls for careful planning for delivery and installation. Confirm your bathroom access, floor requirements, and plumbing layout before committing.
Pros:
- Double-ended design is intended for bathing at either end.
- Porcelain enamel over cast iron offers the heat-retention benefit associated with cast iron.
- Rolled rim and claw feet give it a traditional farmhouse look.
- Rim faucet drillings are included.
Cons:
- Does not have the raised back of a slipper tub.
- Confirm faucet compatibility and installation requirements before purchase.
Verdict: Choose the Cambridge if you want a classic 60-inch tub with a two-ended bathing layout and rim-mounted faucet placement.
2. Charlotte 72-Inch Slipper Clawfoot Tub: Best for a Spacious Soaking Setup
This Charlotte is the longest tub in the group at 72 inches. Its slipper shape has a raised end, creating a more lounge-like profile than the Cambridge or Heritage. The extra length may appeal if you have room for a large freestanding tub and want a visually prominent feature in a farmhouse-style bath.
The tub is made with porcelain enamel over cast iron, and the product description highlights the material’s heat retention. It has no faucet drillings. That gives you flexibility in planning a separate faucet location, but means you should decide on a compatible plumbing arrangement before installation. Depending on the bathroom layout, a wall- or floor-mounted faucet may be worth considering.
The generous length is also its biggest limitation: measure the room, doorway, and route into the bathroom carefully. The product information supplied here does not provide detailed seating or soaking-depth measurements for this particular 72-inch model, so confirm those details if they are important to your comfort.
Pros:
- 72-inch length offers a spacious profile.
- Slipper shape provides a raised end for a different bathing posture.
- Porcelain enamel over cast iron is designed to retain heat well.
- No faucet drillings allow a separate faucet placement plan.
Cons:
- Requires ample floor space and a suitable delivery path.
- Faucet and plumbing placement need to be planned separately.
Verdict: The 72-inch Charlotte is a strong fit for a roomy bathroom where a long slipper tub and separate faucet placement are priorities.
3. Randolph Morris Mila Slipper Tub: Best for a Size Range and Adjustable Feet
The Mila is a cast-iron slipper tub listed with 58-inch, 61-inch, and 67-inch size options. The supplied specifications give the 61-inch version overall dimensions of about 61 inches long, 30 inches wide, and 28 inches high, with a 15-inch soaking depth. Its raised-back silhouette makes it a more sculpted alternative to a classic roll-top tub.
The porcelain enamel surface is described as high-gloss, stain-resistant, easy to clean, and resistant to scratches. The non-porous finish is also described as resisting mold and mildew buildup. The feet ship unattached and include adjustable levelers, which can help stabilize the tub during setup. Plan for assembly and leveling rather than assuming the feet arrive installed.
The listing title includes the word “Oil,” but the supplied details do not clearly explain what finish or option that refers to. Check the product page carefully to verify the color and selected size. With no faucet drillings, this model also needs a separate faucet plan.
Pros:
- Multiple listed lengths can suit different bathroom layouts.
- 15-inch soaking depth is specified for the 61-inch version.
- Adjustable levelers are included with the feet.
- Porcelain enamel finish is described as easy to clean and scratch resistant.
Cons:
- Feet arrive unattached and require installation.
- Verify the finish and size option, as the title’s “Oil” suffix is not explained in the supplied details.
Verdict: Pick the Mila if you want a slipper design, a choice of listed lengths, and adjustable feet, and you are comfortable confirming the exact finish and configuration.
4. Heritage 54-Inch Classic Clawfoot Tub: Best for a Smaller Bathroom
The Heritage is a 54-inch classic roll-top clawfoot tub, making it the shortest model in this comparison. Its traditional profile and rim faucet drillings keep the design straightforward for a vintage-inspired renovation. A shorter tub can be easier to fit into a compact room than a 60- or 72-inch option, though you should still check its full dimensions and clearances before ordering.
Like the other models here, it uses porcelain enamel over cast iron. The maker points to cast iron’s heat retention and describes the tub as designed for comfortable bathing. The rim drillings are useful if your plan calls for a tub-mounted faucet; make sure the faucet configuration matches the holes provided.
At 54 inches, this model is more space-conscious than the larger picks, but its shorter length may not suit everyone’s preferred bathing position. The supplied product details do not include a soaking depth or seating-area measurement, so review those specifications before deciding based on comfort alone.
Pros:
- 54-inch length may work in a tighter bathroom layout.
- Classic roll-top styling suits a farmhouse or vintage look.
- Porcelain enamel over cast iron is associated with strong heat retention.
- Rim faucet drillings are included.
Cons:
- Shorter length may feel limiting if you prefer a more spacious tub.
- Confirm the exact dimensions and faucet fit before ordering.
Verdict: The Heritage is the practical choice when you want a traditional cast-iron clawfoot look but need to start with a shorter tub length.
5. Randolph Morris Charlotte Slipper Tub: Best for a Classic Slipper Shape in More Sizes
This Randolph Morris Charlotte is a slipper-style clawfoot tub with several listed size options, from 54 inches through 72 inches. The 60-inch version named in the title is listed at about 60.5 inches long, 30 inches wide, and 30 inches high, with a 13⅜-inch soaking depth. The listing also provides measurements for the other sizes, making it easier to compare the available configurations.
Its porcelain enamel over cast iron is described as durable, easy to clean, and resistant to scratches. The tub has no faucet drillings, so you will need to plan a separate faucet location. The product information says the feet ship unattached, which means you should account for installation and leveling during the project.
The stated soaking depth is shallower than the Mila’s listed 15 inches, so the two may feel different in use. Compare the seating dimensions and soaking depth with your own preferences rather than choosing by exterior length alone. Also confirm which size is selected on the product page, since the listing covers multiple configurations.
Pros:
- Several listed sizes offer flexibility for different rooms.
- Slipper shape creates a raised-end profile.
- Porcelain enamel finish is described as easy to clean and scratch resistant.
- Dimensions and soaking depth are provided for the listed configurations.
Cons:
- No faucet drillings, so the faucet must be planned separately.
- Feet ship unattached and need to be installed.
Verdict: Choose this Charlotte if you want a slipper tub with a range of listed lengths and can plan for separate faucet placement and foot installation.
How to Choose a Farmhouse Old Clawfoot Tub
Measure the Room and the Delivery Route
Start with the tub’s full outside dimensions, not just the length in its name. Measure the available floor space, nearby fixtures, door swings, and the path from the entry point to the bathroom. A freestanding tub needs room around it for cleaning and access, and a long cast-iron model can be challenging to maneuver through tight turns. Confirm the exact dimensions for the selected size before you order.
Choose the Shape That Fits Your Bathing Style
A double-ended tub, such as the Cambridge, is designed for bathing at either end. A slipper tub has a raised back and a more lounge-like profile. A classic roll-top style, such as the Heritage, keeps the silhouette simple and traditional. Consider how you like to sit and lean, then compare the inner seating area and soaking depth when those measurements are available.
Plan Faucet Placement Before Selecting a Tub
The Cambridge and Heritage have rim faucet drillings. The two Charlotte models and the Mila do not. A tub without drillings needs a faucet location planned outside the tub rim, such as a wall- or floor-mounted setup when suitable for your bathroom. Check the faucet’s configuration and the tub’s supplied hole layout before purchase so the plumbing plan fits the model.
Understand the Cast-Iron Installation Needs
These tubs use porcelain enamel over cast iron, and the supplied product descriptions highlight cast iron’s heat retention. Cast iron is also a substantial material to move, so plan for delivery access and ask a qualified installer to assess floor and installation requirements for your home. Some listed models ship with the feet unattached, so verify what assembly and leveling will involve.
Compare Soaking Depth and Interior Space
Exterior length alone does not tell you how roomy a tub will feel. For the Mila, the listed 61-inch version has a 15-inch soaking depth. The 60-inch Charlotte listing specifies a 13⅜-inch soaking depth and gives seating-area measurements for its listed sizes. Compare those interior details when available, and verify dimensions for other models if a particular depth or seating length matters to you.
Confirm the Exact Size and Finish
Some listings cover more than one tub size, even when the product title names a single length. Check the selected configuration in the product options and make sure the measurements match your plan. For the Mila, the title’s “Oil” suffix is not explained in the supplied product details, so verify the finish shown for the option you intend to order.
Frequently Asked Questions
What makes a clawfoot tub a farmhouse-style choice?
Its freestanding shape, visible feet, and traditional rolled or raised rim create a vintage look that works well with farmhouse decor. The exact appearance depends on the tub’s silhouette, feet, and finish.
Which of these tubs is the shortest?
The Heritage is listed as a 54-inch tub. The Randolph Morris Charlotte listing also includes a 54-inch size option, so confirm the selected configuration if you are comparing the shortest choices.
Which models have faucet drillings?
The Cambridge and Heritage have rim faucet drillings. The 72-inch Charlotte, Mila, and Randolph Morris Charlotte are listed with no faucet drillings.
Are these tubs made from cast iron?
Yes. The supplied descriptions identify all five as porcelain enamel over cast iron. The product information highlights cast iron’s heat retention.
Do the tubs include feet already attached?
The supplied details say the Mila and Randolph Morris Charlotte feet ship unattached. Check the product information for the other models to confirm how their feet are supplied and what assembly is required.
How do I choose between a slipper tub and a double-ended tub?
A slipper tub has a raised end, while the Cambridge double-ended model is designed for bathing at either end. Choose based on the posture and shape you prefer, then compare interior measurements and faucet placement.
What should I check before ordering a cast-iron clawfoot tub?
Verify the selected tub’s dimensions, faucet setup, finish, delivery access, and installation requirements. Because cast iron is substantial, ask an installer to assess the room and floor requirements before your purchase is final.
Final Recommendation
For the best all-around fit, the Cambridge is a strong choice if you want a 60-inch double-ended tub with rim faucet drillings. Choose the 72-inch Charlotte for a larger room and a dramatic slipper profile, or the Heritage if a shorter classic tub better suits your layout. The Mila and Randolph Morris Charlotte offer useful size choices, but check the exact configuration, faucet plan, and installation details before deciding.
