Product reviewRoofing & Exterior

Best Fire Proof Foam Insulation: Top 5 Compared for Walls, Attics and Gaps

Updated 12 min read

Reader-supported: when you buy through links on our site, we may earn an affiliate commission at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases. Learn more.

Fire-rated spray foam can help seal drafts and add insulation in gaps, wall cavities, attics, and other hard-to-reach areas. But “fire rated” does not mean fireproof: a foam’s surface-burning test result is not the same as a fire-resistance rating for a wall or ceiling assembly. The right choice depends on the area you’re insulating, the coverage you need, and the product’s application instructions and code requirements.

Below, we compare five options by their stated fire-test claims, insulation values, kit contents, and intended uses. Treat the listed coverage and performance figures as manufacturer specifications, and check the product label and local building rules before you start.

Quick Comparison

ProductStated insulation performanceKit or coverage detailsBest suited for
BEEST FullStop Spray Foam Insulation KitR-8.24 at 2 inches; ASTM E84 FSI 0 and SDI 120, according to the product descriptionUp to 120 board feet; six cans and application gearSmaller jobs where a complete kit and stated test figures matter
SPRAYMAN Spraycoat Fire Rated KitR-11.32 at 2 inches, according to the product titleListed for 240 sq. ft.; dual-nozzle systemProjects that need separate nozzle options for walls and ceilings
Kraken Bond Fastcoat KitR-5.66 per inchListed for 240 sq. ft.; 12 cans and application gearAttics, walls, and crawl spaces where a larger multi-can kit is useful
Akfix Thermcoat KitR-11.32 at 2 inches, according to the product descriptionListed for 360 sq. ft.; 18 cans and two nozzlesLarger jobs, if the product is available when you shop
Kraken Bond Thermafoam Wide SprayR-5.66 per inch; stated FSI ≤15 and SDI ≤40Two 16-ounce cans; coverage figure not providedBroad spray coverage in smaller or hard-to-reach areas

Our Picks: Best Fire Proof Foam Insulation reviews

1. BEEST FullStop: A Complete Kit With Detailed Fire-Test Figures

BEEST FullStop is a polyurethane spray foam kit for filling gaps and insulating areas such as walls and attics. Its description gives specific ASTM E84 results: a Flame Spread Index of 0 and a Smoke Developed Index of 120, which the manufacturer says meet Class A surface-burning criteria. It also lists an R-value of 8.24 at a thickness of 2 inches.

The kit includes six foam cans, an applicator gun, cleaner, gloves, goggles, and a coverall. Having basic application gear in the box can make setup more straightforward, though you should still read the label to confirm whether you need any additional protective equipment. BEEST recommends applying the foam when conditions are in the 68–77°F range.

The foam is described as bonding to common building materials such as wood, metal, drywall, concrete, and brick. Its stated capacity is up to 120 board feet, a volume-based measure that is not directly interchangeable with square-foot coverage unless you know the applied thickness. That makes it important to estimate the size and depth of your gaps before choosing a kit.

Compared with the larger kits below, FullStop is a more modest option for a smaller project. Its detailed ASTM E84 figures are useful for comparison, but they do not establish that an insulated wall or ceiling assembly is fire-resistant. Confirm the required fire protection for the location where you plan to use it.

Pros:

  • Lists specific ASTM E84 flame-spread and smoke-developed results.
  • Includes six cans, an applicator gun, cleaner, and protective gear.
  • Provides a stated R-value at a specified thickness.
  • Describes adhesion to several common building materials.

Cons:

  • Its stated capacity may be limiting for a larger project.
  • Application temperature guidance is relatively specific.

Verdict: Choose BEEST FullStop if you want an all-in-one kit for a smaller insulation job and value having specific surface-burning test figures to review.

2. SPRAYMAN Spraycoat: A Dual-Nozzle Kit for Walls and Ceilings

SPRAYMAN Spraycoat is a closed-cell polyurethane foam kit intended for insulation and gap filling in places such as roofs, walls, basements, and tanks. The manufacturer describes it as Class A fire rated and tested to ASTM E84. The product title lists an R-value of 11.32 at 2 inches, while the kit is listed for 240 square feet.

A key design feature is its pair of interchangeable nozzles: one is intended for vertical surfaces and the other for ceiling work. That can be useful when a project includes both orientations, where aiming and controlling the spray may otherwise be awkward. The product description also says the cured foam is paintable and designed to adhere without dripping.

The foam is described as a rigid, closed-cell material that bonds to a broad range of surfaces, including wood, concrete, drywall, metal, PVC, and OSB. The manufacturer also states that it resists shrinking, cracking, and settling. These are product claims, so careful surface preparation and following the specified application process remain important for the finished result.

One limitation is that the supplied product information does not provide a specific flame-spread or smoke-developed index. Its Class A claim should not be treated as proof that the foam can be left exposed or that it replaces a code-required thermal or ignition barrier. The claimed coverage also depends on how much foam you apply and the thickness required for your project.

Pros:

  • Includes separate nozzles for vertical and overhead applications.
  • Lists 240-square-foot coverage and an R-value at a stated thickness.
  • Describes adhesion to many common construction materials.
  • Cured foam is described as paintable.

Cons:

  • The supplied description does not list exact ASTM E84 index results.
  • Coverage depends on the area and application thickness.

Verdict: SPRAYMAN is a practical option to consider for a mixed wall-and-ceiling project if its stated coverage fits your needs and you verify the fire-protection requirements for your installation.

3. Kraken Bond Fastcoat: A Multi-Can Kit for Larger Insulation Areas

Kraken Bond Fastcoat is a closed-cell polyurethane foam kit for attics, walls, crawl spaces, and other areas where you need to fill gaps and limit air movement. Its description states that it is Class A fire rated and meets ASTM E84 standards. The listed thermal performance is R-5.66 per inch.

The kit includes 12 cans, an application gun, foam cleaner, goggles, a worksuit, and gloves. It also has a dual-nozzle system for vertical and ceiling applications. The product is listed for 240 square feet, but the actual area you can cover will depend on the thickness and pattern of application.

Kraken Bond recommends bringing the can to about 68°F before use and gives an application range of 41–86°F. That broad stated range may offer more flexibility than products with narrower guidance, but the instructions still call for proper preparation and ventilation. The description says the foam adheres to most building materials and can form an airtight, watertight seal.

Fastcoat’s R-value per inch is presented differently from products that list performance at 2 inches, so compare figures only at the same thickness. Its larger can count and included gear make it a more substantial kit than the two-can Thermafoam product, though a high can count does not guarantee a particular finished coverage in every space.

Pros:

  • Includes 12 cans and a broad set of application and safety accessories.
  • Lists R-5.66 per inch and ASTM E84 compliance.
  • Includes nozzle options for walls and ceilings.
  • Provides a stated application temperature range.

Cons:

  • The stated 240-square-foot coverage depends on application thickness.
  • Its R-value format differs from products that give a figure at 2 inches.

Verdict: Fastcoat suits a larger DIY project where you want a multi-can kit, dual-nozzle application, and a listed R-value per inch.

4. Akfix Thermcoat: The Largest Listed Kit for Broad Coverage

Akfix Thermcoat is a closed-cell spray foam kit intended for residential, commercial, and industrial insulation work. Its product description says it is Class A fire rated and tested to standards such as ASTM E84. It lists an R-value of 11.32 at 2 inches and a thermal conductivity of 0.025 W/m·K.

This kit has 18 cans and is listed for 360 square feet, the largest stated coverage among the products in this comparison. It also includes two interchangeable nozzles: one for vertical surfaces and one for overhead or ceiling application. The manufacturer describes the foam as suitable for a wide mix of surfaces, including wood, brick, drywall, concrete, metal, PVC, and OSB.

Akfix recommends warming the can to about 68°F and gives an application range of 41–86°F. Its description says the foam can be applied in layers up to 5 cm thick. Check the product instructions for the correct method and thickness rather than assuming one pass will meet your insulation needs.

The main practical caveat is availability: this product is marked unavailable in the supplied listing information. Availability can change, so confirm the listing before planning a project around it. As with the other options, a Class A surface-burning claim is not a fire-resistance rating for a complete building assembly.

Pros:

  • Largest stated coverage in this comparison at 360 square feet.
  • Includes 18 cans and two application nozzles.
  • Lists R-value and thermal conductivity figures.
  • Describes compatibility with many construction materials.

Cons:

  • The supplied listing information marks the product unavailable.
  • The stated coverage will vary with the required application thickness.

Verdict: Akfix Thermcoat is worth considering for a broad project if it becomes available and its instructions, coverage, and fire-protection claims meet your needs.

5. Kraken Bond Thermafoam Wide Spray: A Two-Can Option for Broad Application

Kraken Bond Thermafoam Wide Spray is a polyurethane foam product designed to cover broad surfaces and reach awkward spaces such as wall cavities, attics, and California corners. The package contains two 16-ounce cans and includes a smart nozzle intended to help control the spray and foam expansion.

The manufacturer lists an R-value of 5.66 per inch and Class A surface-burning figures of FSI ≤15 and SDI ≤40. It also describes the cured foam as easy to trim, shape, and finish, with adhesion to wood, metal, masonry, and drywall. Those details make it a potentially useful choice for smaller tasks or spaces where a wider spray pattern could help with application.

Unlike the larger kits in this comparison, the supplied product information does not give a square-foot coverage figure. That makes it harder to estimate how much material you’ll need for a planned area. A two-can package may be convenient for a limited project, but it may not be the best fit if you need to insulate a large wall or attic section.

Its stated fire-test figures are specific, but they still describe surface-burning performance rather than a fire-resistance rating for an entire building assembly. Follow the label and check whether the foam requires a protective covering in your intended location.

Pros:

  • Lists specific flame-spread and smoke-developed figures.
  • Smart nozzle is designed for controlled, broad application.
  • Describes adhesion to wood, metal, masonry, and drywall.
  • Cured foam is described as trimmable and finishable.

Cons:

  • The supplied information does not list an estimated coverage area.
  • The two-can package may be too small for a larger insulation project.

Verdict: Consider Thermafoam Wide Spray for a limited area where a broad spray pattern and listed surface-burning figures are useful, but estimate your material needs carefully because coverage is not provided.

How to Choose Fire-Rated Spray Foam Insulation

Understand what the fire rating does—and does not—mean

Look closely at the test standard and the exact claim. ASTM E84 results describe how a material performs in a surface-burning test; they do not establish how long a complete wall or ceiling assembly can resist fire. A “Class A” claim is not the same as “fireproof.” Depending on where the foam is installed, building codes may require a thermal barrier, ignition barrier, or another approved covering. Check local rules and the product label before leaving foam exposed.

Compare R-values at the same thickness

An R-value is meaningful only when you know the thickness it describes. Some products here list a value at 2 inches, while others provide a per-inch figure. Avoid comparing those numbers as if they were stated on the same basis. Also consider the thickness your project needs and follow the manufacturer’s instructions for how to apply the foam.

Estimate coverage for your actual project

Product coverage figures are not always presented in the same units. Square feet describe area, while board feet account for both area and thickness. Coverage can also change with the shape of a cavity, the number of gaps, and how much foam you apply. Measure the area and depth you plan to fill, then compare that estimate with the product’s stated capacity. If the manufacturer does not provide coverage, as with Thermafoam Wide Spray, contact the seller or manufacturer before buying for a larger job.

Choose the right kit size and application setup

A small kit may be easier to manage for a few gaps or a limited section, while a multi-can kit may make more sense for a larger area. Check what comes in the box, including the applicator, nozzles, cleaner, and protective gear. Dual-nozzle designs can be useful when you need to spray both vertical and overhead surfaces, but the nozzle does not replace careful technique or preparation.

Check temperature, ventilation, and protective equipment

Spray foam can have specific temperature requirements for the can, the surface, or the application area. Follow the product’s stated range and preparation steps; cold material or unsuitable conditions can affect how the foam applies. Read all safety directions, use the required protective equipment, and provide the ventilation specified on the label. Do not assume that the items included in a kit are the only protection you may need.

Confirm compatibility and code requirements

Check that the foam is suitable for the surfaces and location you plan to insulate. Product descriptions list materials such as wood, concrete, drywall, metal, and masonry, but you should confirm compatibility for your specific substrate. For work in a home, garage, crawl space, attic, or vehicle, also consider local building rules and any special requirements for that space.

Frequently Asked Questions

Is fire-rated spray foam insulation fireproof?

No. A fire-related rating or ASTM E84 result does not mean the foam cannot burn or that it protects a whole building assembly from fire. Check the product’s exact test claim and whether a code-required barrier or covering is needed in your application.

What does ASTM E84 measure?

ASTM E84 is a test used to evaluate surface-burning characteristics, including flame spread and smoke development. The results apply to the tested material under the test conditions; they do not provide a fire-resistance rating for a complete wall, ceiling, or floor assembly.

Which product has the highest stated R-value?

SPRAYMAN Spraycoat and Akfix Thermcoat list R-11.32 at 2 inches. Compare this with other products only after matching the thickness and the way the R-value is reported. R-values alone do not tell you whether a foam is suitable for a particular project.

Can I use these products on ceilings?

SPRAYMAN, Kraken Bond Fastcoat, and Akfix describe dual-nozzle systems intended for vertical and overhead application. Follow the specific product instructions for ceiling use, preparation, application thickness, and protective equipment.

How do I estimate how much spray foam I need?

Measure the area and the depth you need to fill, then use the product’s stated coverage or board-foot capacity as a guide. Coverage varies with application thickness and the shape of the space. If a listing does not provide a coverage figure, get clarification before purchasing for a larger job.

Do I need a professional to apply spray foam?

Some kits are sold for DIY use, but that does not mean every installation is simple or suitable for a first-time project. Review the application and safety instructions, consider the size and location of the work, and check local code requirements. For complex areas or work that must meet specific building standards, a qualified insulation professional may be the safer choice.

Can spray foam be left exposed?

Do not assume it can. Whether foam needs a protective covering depends on the product, where it is installed, and applicable building rules. Check the label and local code requirements before leaving it exposed.

Final Recommendation

For a smaller job where a complete kit and detailed ASTM E84 figures are priorities, BEEST FullStop is a strong place to start. SPRAYMAN Spraycoat and Kraken Bond Fastcoat offer dual-nozzle options for projects that include both walls and ceilings, while Akfix Thermcoat has the largest stated coverage if it is available. Kraken Bond Thermafoam Wide Spray may suit a limited area, but its supplied information does not specify coverage. Whichever option you choose, treat fire-rating language carefully, follow the application instructions, and confirm any required protective barrier before installation.

Rate this post
Spread the love

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top