Product reviewDoors, Windows & Floors

Best French Door Handle Set: Compare Fit, Locks and Finishes

Updated 10 min read

Reader-supported: when you buy through links on our site, we may earn an affiliate commission at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases. Learn more.

A French door handle set needs to do more than look right: the active door needs a working lock, while the second handle should suit your door’s layout. Before choosing, compare the set’s latch backset, door-thickness range, and mounting-hole spacing with your existing door. These five options pair a keyed handle with a second handle or double-door arrangement, but their fit details and finishes differ.

Quick Comparison

ProductKey featuresFit notesBest for
HISAFE Matte Black Double French Door Handle SetKeyed entry set and dummy handleDoor thickness: 1-3/8–2 inches; adjustable mounting distanceDoors that need a wider thickness range
Camtek Double Front Door Handle and Deadbolt SetKeyed lock and deadbolt; reversible designDoor thickness: 1-3/8–1-3/4 inches; sliding through-boltA matte black look and adjustable mounting
NEWBANG Exterior Double Door Lever HandlesetKeyed active handle and dummy handleDoor thickness: 1-3/8–2 inches; adjustable hole spacingA flexible fit for standard door preparations
EHOMEWARE Satin Nickel Double Front Door Lock SetKeyed entry set and non-locking handleDoor thickness: 1-3/8–1-3/4 inches; two backset optionsA satin nickel finish; listing availability may vary
Probrico Double Door Handle Set with Keyed DeadboltKeyed entry set and dummy handleDoor thickness: 1-3/8–1-3/4 inches; adjustable mounting spacingA matte black set with included templates

Our Picks: Best French Door Handle Set reviews

1. HISAFE Matte Black Set: A Flexible Fit for Thicker Doors

The HISAFE set pairs a keyed entry handle with a separate dummy handle for the second door. The active handle includes a deadbolt, while the dummy handle serves as a non-locking pull. Its matte black finish suits a simple, modern entryway.

Its main advantage is the stated fit range: it works with doors from 1-3/8 to 2 inches thick. The bottom stem adjusts to fit mounting-hole spacing from 8-1/3 to 9-5/6 inches, and the set includes two backset latch sizes. That range gives it an edge over options limited to doors up to 1-3/4 inches thick.

The handles are non-handed, so the set is designed for either left- or right-handed doors. Installation is described as a screwdriver job, with hardware included. Still, measure your door before ordering: adjustable parts help only when your existing holes fall within the listed range.

Pros:

  • Includes one keyed handle set and one non-locking dummy handle.
  • Fits listed door thicknesses from 1-3/8 to 2 inches.
  • Adjustable mounting distance and two latch backsets.
  • Designed for either door handing.

Cons:

  • The matte black finish may not suit homes with nickel or brass hardware.
  • Mounting-hole spacing still needs to match the stated adjustment range.

Verdict: Choose the HISAFE if you want a keyed-and-dummy pair and need the broadest listed door-thickness range among these picks.

2. Camtek Double Door Set: Reversible Style with Adjustable Mounting

Camtek’s matte black set is made from zinc alloy and is described as a double front door handle and deadbolt set. The keyed handle locks from inside with a turn button and unlocks from outside with a key. The listing also says the keyed handle and deadbolt use the same keys.

A sliding through-bolt adjusts by 1.5 inches to suit existing holes, and the set includes latch options for 2-3/8- or 2-3/4-inch backsets. Its stated door-thickness range is 1-3/8 to 1-3/4 inches, so it is less suitable than the HISAFE or NEWBANG for doors thicker than that. The reversible design accommodates left- or right-handed doors.

Camtek emphasizes careful alignment during installation. That is a useful point to keep in mind: even when the existing holes are compatible, the parts need to line up properly for the lock to operate as intended. The supplied description says installation requires a screwdriver and includes the hardware.

Pros:

  • Zinc alloy construction with a matte black finish.
  • Reversible for left- or right-handed doors.
  • Adjustable through-bolt and two latch backsets.
  • Keyed handle and deadbolt use the same keys.

Cons:

  • Its stated door-thickness range tops out at 1-3/4 inches.
  • Installation calls for careful alignment of the components.

Verdict: The Camtek is a good fit if you want a reversible matte black set with an adjustable through-bolt and your door falls within its stated thickness range.

3. NEWBANG Lever Handleset: A Keyed-and-Dummy Pair with Broad Door Fit

NEWBANG packages an active keyed entry handle and a non-locking dummy handle. The active handle can be unlocked from outside with a key and operated from inside with a thumb turn. This arrangement is intended for double doors where only one handle needs to lock.

The set’s adjustable pin position accommodates mounting-hole spacing from 8-1/3 to 9-5/6 inches. It also includes adjustable latch options for 2-3/8- or 2-3/4-inch backsets and is listed for doors from 1-3/8 to 2 inches thick. As with the HISAFE, that wider thickness range may make it worth considering when a standard 1-3/4-inch maximum is not enough.

The design is reversible for left- or right-handed doors. The package description mentions hardware and a diagram template, with installation using a screwdriver. Check the measurements and template against your door before removing the old hardware, particularly if you are reusing existing holes.

Pros:

  • Includes a keyed active handle and a non-locking dummy handle.
  • Fits the listed 1-3/8- to 2-inch door-thickness range.
  • Adjustable hole position and two backset options.
  • Reversible design and included diagram template.

Cons:

  • The finish is not specified in the supplied product details.
  • Existing mounting holes must fit the listed adjustment range.

Verdict: Consider the NEWBANG if a keyed-and-dummy setup and a wider door-thickness range matter more to you than choosing a clearly specified finish.

4. EHOMEWARE Satin Nickel Set: A Classic Finish and Straightforward Fit Specs

The EHOMEWARE set combines a keyed entry handle with a non-locking handle for the paired door. Its satin nickel finish offers an alternative to the several matte black options in this group. The exterior lock uses a key, while the interior has a thumb turn.

The listed fit covers door thicknesses from 1-3/8 to 1-3/4 inches, with latch options for 2-3/8- and 2-3/4-inch backsets. It is reversible for left- or right-handed doors. The product description specifies zinc alloy construction and says the package includes installation hardware and instructions.

One practical limitation is the listing status supplied for this product: it is marked unavailable. Availability can change, so check the listing before making plans around this particular finish. If it is not available, the other options here offer black finishes, though their fit details differ.

Pros:

  • Satin nickel finish for a different look from the black options.
  • Includes a keyed entry set and a non-locking handle.
  • Reversible design with two backset options.
  • Zinc alloy construction is specified in the product details.

Cons:

  • The supplied listing information marks it unavailable.
  • Its listed door-thickness range does not extend beyond 1-3/4 inches.

Verdict: The EHOMEWARE is worth considering if you prefer satin nickel and your door matches its measurements, but confirm that it is available before choosing it.

5. Probrico Double Door Set: Matte Black Hardware with Installation Templates

Probrico’s matte black set includes one keyed entry handle with a deadbolt and one dummy handle for the second door. The manufacturer describes the handles as zinc alloy and lists the finish as a minimalist style for contemporary homes. The pair is reversible for left- or right-handed doors.

The stated door-thickness range is 1-3/8 to 1-3/4 inches, and the latch supports either a 2-3/8- or 2-3/4-inch backset. Its mounting screw spacing is listed as 197–234 mm. That measurement is not the same range used by the HISAFE and NEWBANG descriptions, so compare it directly with your door’s preparation rather than assuming the sets fit the same holes.

The package description says it includes hardware, templates, and an illustrated manual. Those materials can help with a DIY installation, but they do not remove the need to check measurements and align the lock parts. The product details also make a durability claim about operational cycles; treat that as a manufacturer-provided specification, not a guarantee of how the set will perform on every door.

Pros:

  • Includes keyed and dummy handles in a matte black finish.
  • Zinc alloy construction is specified.
  • Reversible design with two latch backsets.
  • Includes templates and an illustrated manual.

Cons:

  • Fits doors up to 1-3/4 inches thick, not the wider 2-inch range.
  • Its mounting spacing should be checked carefully against your door.

Verdict: Pick the Probrico if you want a matte black keyed-and-dummy set and its mounting spacing and door-thickness range match your door.

How to Choose a French Door Handle Set

Confirm the active and inactive door arrangement

Many double-door sets pair one keyed entry handle with one dummy handle. The active side operates the latch or lock; the dummy side is a non-locking handle. Check that this is the layout you need, especially if both door panels must operate or lock in a particular way. Product descriptions do not all explain the paired-door setup in the same detail.

Measure door thickness

Door thickness is one of the first fit details to check. In this group, the HISAFE and NEWBANG are listed for doors from 1-3/8 to 2 inches thick. Camtek, EHOMEWARE, and Probrico list a range of 1-3/8 to 1-3/4 inches. Measure the door itself rather than relying on a general assumption about standard sizes.

Check the backset

The backset is the distance from the edge of the door to the center of the handle or latch hole. Several sets here include latches for both 2-3/8- and 2-3/4-inch backsets. Confirm which one your door requires and make sure the product includes a matching option before installation.

Compare mounting-hole spacing

For a replacement, measure the distance between the existing mounting holes and compare it with the set’s stated adjustment range. HISAFE and NEWBANG list a range of 8-1/3 to 9-5/6 inches; Camtek says its through-bolt slides by 1.5 inches; Probrico lists mounting spacing of 197–234 mm. These specifications are not interchangeable, so check the exact product measurements.

Choose a handing and finish that suit your door

A reversible set is designed to work with either left- or right-handed doors, which can simplify choosing the correct orientation. Finish is a separate decision: the listed options include matte black and satin nickel, while NEWBANG’s supplied description does not specify a finish. Match the handle to your existing entry hardware if you want a consistent look.

Review what comes in the package

Check whether the set includes the active lock, the dummy handle, the required latch options, screws, and installation instructions or a template. The listed packages vary in how much installation guidance they mention. Even when hardware is included, a screwdriver installation still depends on compatible door preparation and careful alignment.

Set realistic expectations for security

A keyed handle and deadbolt provide locking functions, but the product details supplied here do not state a security grade or establish how a complete door assembly will perform. Choose a set that fits your door correctly, follow the installation instructions, and consider the door, frame, and other hardware as part of the overall entryway.

Frequently Asked Questions

Can I use a French door handle set on a regular double entry door?

Several of these sets are described for French doors, double front doors, or other exterior double-door applications. Check the product’s stated measurements and handle arrangement against your door before buying.

What is a dummy handle?

A dummy handle is a non-locking handle. In a paired set, it can provide a matching pull on the second door while the keyed handle operates on the active side.

Are these sets reversible?

All five product descriptions include reversible or non-handed compatibility for left- and right-handed doors. Confirm the installation instructions for the particular set you choose.

Will every set fit a door that is 1-3/4 inches thick?

Each product’s stated range includes 1-3/4-inch doors. The HISAFE and NEWBANG are also listed for doors up to 2 inches thick; the other three list a maximum thickness of 1-3/4 inches.

What does backset mean, and which size should I choose?

Backset measures from the door edge to the center of the handle or latch hole. Compare your door’s measurement with the included latch options. Most of the sets listed here offer both 2-3/8- and 2-3/4-inch options.

Can I install one of these sets myself?

The product descriptions generally call for a screwdriver and state that installation hardware is included. Some also mention a template or instructions. If your holes do not align with the set or you are unsure about the lock installation, get help before modifying the door.

Which finish should I choose?

Choose a finish that works with your existing door hardware and the style of your entryway. Matte black is available on several listed sets, while EHOMEWARE offers satin nickel. The supplied NEWBANG details do not identify its finish.

Final Recommendation

The HISAFE is the strongest all-around fit on paper if your door is thicker than 1-3/4 inches or you want a clearly specified adjustable mounting range. NEWBANG is another option with a keyed-and-dummy layout and a 2-inch maximum door thickness. For doors within 1-3/4 inches, compare Camtek and Probrico by finish, mounting measurements, and included installation materials. Choose EHOMEWARE if satin nickel is your preference, but check its listing availability before you commit. Most important, measure your door thickness, backset, and mounting-hole spacing before ordering.

Rate this post
Spread the love

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top