Choosing the best glass fiber batt insulation starts with matching the batt’s R-value, width, thickness, and facing to your framing and project. The options below cover 2×4 and 2×6 walls, floors, and attic applications. Check the product dimensions against your framing before ordering, and confirm the listed coverage with the seller when package details conflict.
Table of Contents
Quick Comparison
| Product | R-value | Facing | Listed application or fit | Listed coverage |
|---|---|---|---|---|
| Owens Corning R-19 Batt Insulation | R-19 | Kraft-faced | 2×6 walls or floors; 15 in. wide, 6.25 in. thick | Conflicting figures: 775 or 871.8 sq. ft. |
| R-15 Wall Unfaced Batt Insulation | R-15 | Unfaced | 15 in. wide by 105 in. long | 87.5 sq. ft. |
| Owens Corning R-15 Faced Batt Insulation | R-15 | Kraft-faced | 2×4 walls; 23 in. wide, 3.5 in. thick | 831.84 sq. ft. |
| Owens Corning R-13 Unfaced Batt Insulation | R-13 | Unfaced | 2×4 walls; 15 in. wide, 3.5 in. thick | 1,203.1 sq. ft. |
| Owens Corning R-38 Attic Batt Insulation | R-38 | Unfaced | 24 by 48 in. batts, 12 in. thick; attic use | 512 sq. ft. |
Our Picks: Best Glass Fiber Batt Insulation reviews
Owens Corning R-19: A Higher-R Option for 2×6 Framing
This kraft-faced R-19 batt is listed for 2×6 walls or floors. Its stated dimensions are 15 inches wide and 6.25 inches thick, so it is intended for a different cavity size than the 3.5-inch R-13 and R-15 choices in this roundup. The facing can help provide a layer for moisture control when installed as part of a suitable wall assembly, but it is not a substitute for proper moisture management.
The bulk listing describes ten bags, but its coverage figures do not agree: the product title gives 775 square feet, while the description gives 871.8. The listed brand also differs between the title and product data. That makes this option harder to plan around without confirming the exact package and coverage with the seller.
Choose it if your framing is designed for this thickness and you want R-19 batt insulation. It is less suitable for 2×4 walls, and the coverage discrepancy is a practical concern for a large job.
Pros:
- R-19 rating for projects requiring a higher-rated batt
- Kraft-faced construction
- Listed for 2×6 walls or floors
Cons:
- Coverage figures conflict between the title and description
- Brand information is inconsistent in the listing data
Verdict: Consider this batt for a compatible 2×6 project, but confirm the brand and total coverage before purchasing.
R-15 Unfaced Batts: A Smaller Package for Wall Work
This unfaced R-15 product is listed as a wall batt measuring 15 inches wide by 105 inches long, with 87.5 square feet of coverage. Its lack of paper facing can make it a useful choice where the wall assembly calls for unfaced insulation or where a separate vapor-control layer is planned. Follow the assembly design and local requirements rather than adding a facing without checking.
The listed width is suited to some framing layouts, but the product data does not specify batt thickness or a framing depth. It also identifies the brand as generic, despite the product title naming Owens Corning. Confirm the actual product, thickness, and fit before relying on it for a particular wall cavity.
Compared with the bulk options below, this listing’s stated coverage is modest, which may suit a smaller job or a limited section of wall. For a larger project, check how many packages you will need and whether the seller can confirm package contents.
Pros:
- R-15 rating in an unfaced format
- Listed dimensions may suit framing that accepts 15-inch-wide batts
- Stated coverage is clear at 87.5 square feet
Cons:
- Product data does not state the batt thickness
- Brand details are inconsistent in the listing
Verdict: This is a possible fit for a smaller unfaced wall-insulation job, provided you verify its brand, thickness, and cavity compatibility first.
Owens Corning R-15 Faced Batts for 2×4 Walls
This kraft-faced fiberglass batt is listed for 2×4 walls, with a stated thickness of 3.5 inches and width of 23 inches. Its R-15 rating makes it a higher-R option than the R-13 batt in this roundup, while the facing offers a built-in layer intended for exterior-surface applications. Make sure the facing direction and use match the wall design and local building guidance.
The listing describes eight bags and 831.84 square feet of total coverage. That bulk quantity may be useful for a larger project, but it can be more than you need for a small repair or a single room. The 23-inch width is also important to check against your stud spacing; do not assume it will fit every 2×4 wall without trimming or adjustment.
Compared with the R-13 unfaced option, this product offers a higher stated R-value and facing, but less listed total coverage. It is the more direct choice when your project calls for faced batts of this size.
Pros:
- R-15 rating for a 3.5-inch batt
- Kraft-faced format for compatible wall assemblies
- Listed for 2×4 walls
- Bulk package lists 831.84 square feet of coverage
Cons:
- Large package may not suit small projects
- Confirm the 23-inch width against your framing before ordering
Verdict: Choose this option when you need faced R-15 batts for compatible 2×4 walls and can use the listed bulk quantity.
Owens Corning R-13 Unfaced Batts for 2×4 Projects
This unfaced batt is listed for 2×4 walls and measures 15 inches wide by 105 inches long, with a stated thickness of 3.5 inches. Its R-13 rating and lack of facing may suit cavities where the assembly calls for unfaced insulation, including some interior-wall and floor applications. Check the product instructions and wall design before installation.
The listing gives ten bags and 1,203.1 square feet of coverage, making this one of the higher-coverage options here. That quantity can be helpful for a large project, but it may be difficult to store or unnecessary for a small area. Since it has no moisture-control facing, plan any separate vapor-control layer according to the project requirements.
Compared with the faced R-15 batts, this option has a lower R-value but a larger listed coverage and an unfaced design. It may be a practical choice when the project calls for R-13 and does not require a facing.
Pros:
- Unfaced design for assemblies that call for it
- Listed dimensions suit some 2×4 wall applications
- Large stated coverage for bigger jobs
Cons:
- R-13 rating is lower than the R-15 and R-19 choices
- Does not include a moisture-control facing
Verdict: This is a straightforward bulk option when your 2×4 project calls for unfaced R-13 batts and you can use the package quantity.
Owens Corning R-38 Batts for Attic Applications
This unfaced R-38 product is designed for attic use, with 24-by-48-inch batts that are 12 inches thick. The listing describes eight bags totaling 512 square feet. Its size makes it a specialized option for attic spaces and compatible framing rather than a general-purpose batt for standard 2×4 walls.
The product information says to leave at least two inches of properly vented air space with unfaced insulation to help prevent moisture problems. That clearance and ventilation requirement matters: do not block attic airflow or install the batts in a way that conflicts with the roof and ceiling assembly. The listing also says it is not for exterior walls, though it may be used for interior walls, floors, ceilings, or attic areas when conditions are appropriate.
It is the only R-38 choice in this group and is best considered for a project that specifically needs thick attic batts. For sound control, it may be used in suitable interior assemblies, but insulation alone should not be treated as complete soundproofing.
Pros:
- R-38 rating for compatible attic applications
- Unfaced design for assemblies where facing is not required
- Listed 512-square-foot bulk package
- Can suit some interior, floor, or ceiling uses when installed appropriately
Cons:
- Not listed for exterior walls
- Requires attention to attic ventilation and air-space conditions
Verdict: Select this product for a compatible attic or other approved assembly that calls for thick R-38 batts, not as a general wall-insulation choice.
How to Choose Glass Fiber Batt Insulation
Match the R-value to the project
R-value measures resistance to heat flow. The products here range from R-13 to R-38, but a higher number is not automatically the right choice for every cavity. Check your plans, local building requirements, and the space available in the framing. A batt that is too thick for the cavity may not fit properly.
Check the cavity dimensions and batt size
Compare the batt’s width, length, and thickness with your framing before ordering. The options include 15-inch-wide and 23-inch-wide products, as well as 24-by-48-inch attic batts. Framing layouts vary, so measure the actual cavity and confirm the product dimensions rather than relying on a broad label such as “2×4 wall.”
Decide whether you need faced or unfaced insulation
Kraft facing is included on some of these batts, while others are unfaced. Facing can be part of a moisture-control strategy, but the correct choice depends on the full wall or ceiling assembly and local requirements. Unfaced insulation may suit projects that call for it or that use a separate vapor-control layer. Do not treat facing as waterproofing or assume it belongs in every wall.
Choose the right application
Some batts are listed for 2×4 walls, others for 2×6 walls or floors, and the R-38 product is presented mainly for attic use. Pay attention to any application limits in the product information. In particular, the R-38 listing says it is not for exterior walls and calls for proper attic ventilation and air space.
Check package coverage and contents
Estimate the area you need to insulate and compare it with the stated package coverage. Large bundles can be useful for whole-house projects but may leave you with excess material on a small job. Check how many bags or batts are included, and verify the total when the title and description disagree. The R-19 listing in this group has conflicting coverage figures, so confirm that detail before buying.
Plan for careful installation
Fiberglass batts should fit the cavity without being compressed or left with avoidable gaps. Follow the product instructions for cutting, fitting, and facing direction. Wear suitable protective clothing and eye protection when handling fiberglass, and keep insulation clear of heat sources and areas where it could block required ventilation.
Frequently Asked Questions
What does the R-value on batt insulation mean?
R-value describes how well insulation resists heat flow. A higher value indicates greater resistance, but the suitable value depends on the building assembly, available cavity depth, and project requirements.
Should I choose faced or unfaced fiberglass batts?
Choose based on the wall, floor, ceiling, or attic assembly. Faced batts include a kraft layer, while unfaced batts do not. Check your plans and local requirements to determine whether facing or a separate vapor-control layer is appropriate.
Can I use the R-38 batts in an exterior wall?
The product information for this R-38 option says it cannot be used for exterior walls. It is primarily listed for attic applications, with other uses dependent on the assembly and proper installation conditions.
How do I know whether a batt will fit my framing?
Measure the cavity and compare its width and depth with the batt’s stated dimensions. Check the exact product details, since the products in this roundup come in different widths and thicknesses.
Is fiberglass batt insulation soundproof?
No insulation batt should be treated as a complete soundproofing system. Fiberglass batts may help with sound control in suitable assemblies, but results depend on the entire wall or floor construction and how it is installed.
What should I do if a listing gives conflicting coverage figures?
Confirm the package contents and coverage with the seller before ordering. This matters for the R-19 listing, where the title and description state different total areas.
Final Recommendation
For a clearly specified faced option for compatible 2×4 walls, the Owens Corning R-15 Faced Batt is the most direct match in this selection. The R-13 Unfaced Batt is a sensible alternative when your assembly calls for unfaced insulation and you need its larger listed coverage. Choose the R-19 or R-38 products only when their thickness and intended application match your project, and verify uncertain package details before placing an order.