Product reviewDoors, Windows & Floors

Best Glazing Putty For Windows: 5 Picks Compared for Repairs and Reglazing

Updated 10 min read

Reader-supported: when you buy through links on our site, we may earn an affiliate commission at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases. Learn more.

Choosing the best glazing putty for windows depends on the sash material, the size of the repair, and how soon you need to paint. Some compounds are designed to set faster, while others give you a ready-to-use option for a small repair or a larger reglazing job. Below, you’ll find five choices and the details that matter when comparing them.

Quick Comparison

ProductSizeBest forKey detail
DAP ’33’ Window Glazing8 ozSmall face-glazing jobsFor wood, metal, and aluminum sash; sets within three weeks depending on conditions
Sarco Type M Glazing Putty1 pintShop work and smaller projectsDesigned for interior site work; listed coverage is 42 linear feet
Sarco Type M Glazing Putty1 quartLarger reglazing jobsListed coverage is 84 linear feet
Red Devil 0664 Pre-Mixed Glazing Compound1 quartMultiple panes and sash repairsOil-based, knife-grade putty; can be painted immediately with oil-based paint
Red Devil 0662 Pre-Mixed Glazing Compound1/2 pintA few panes or a small repairReady-to-use, oil-based putty for wood and metal sashes

Our Picks: Best Glazing Putty For Windows reviews

1. DAP ’33’ Window Glazing: A Handy Choice for Smaller Repairs

DAP ’33’ is a ready-to-use glazing compound for face glazing wood, metal, and aluminum sash. Its 8-ounce size is a practical fit when you’re repairing a pane or handling a limited amount of glazing rather than stocking up for a large project.

The compound is intended to form an airtight, watertight seal and is described as resisting sagging, shrinking, and cracking while staying flexible during minor expansion and contraction. It can be used indoors or outdoors. DAP says it sets within three weeks, but temperature, humidity, air movement, sunlight, and the amount applied can affect that timing.

That setting window is worth considering before you start. This is not the best match if you need a fast turnaround or a product with a short, fixed skinning time. For a smaller repair where you can allow for changing conditions, its broad sash-material compatibility and modest container size are useful advantages.

Pros:

  • Suitable for wood, metal, and aluminum sash
  • Ready to use and intended for interior or exterior applications
  • Designed to resist sagging, shrinking, and cracking
  • Compact 8-ounce size suits limited repairs

Cons:

  • Setting time can vary with weather and application conditions
  • The small container may not suit a multi-window project

Verdict: Choose DAP ’33’ for a smaller face-glazing repair when you want a ready-to-use compound and can allow time for it to set.

2. Sarco Type M in a Pint: A Smaller Format for Shop Work

Sarco Type M is a ready-to-use glazing putty for bedding and glazing glass in wood sash and doors. The listing describes this pint size as designed for interior site work, while also recommending Type M for shop work after removing and restoring the window. Its stated coverage is 42 linear feet.

The compound is described as workable under a knife or by hand, with an elastic finish that allows normal expansion and contraction. It is also intended to adhere to glazing surfaces and form a watertight bond. Sarco says it can skin over in two days to a week, with curing time depending on conditions.

Priming before glazing is optional according to the product information, but if you do prime, it specifies an oil-based primer. The listing recommends painting once the putty skins and says either oil or acrylic paint can be used. One practical caveat: this pint listing is marked unavailable in the supplied product information, so check the listing before planning your project around it.

Pros:

  • Ready-to-use putty for wood sash and doors
  • Designed to remain elastic as materials move normally
  • Stated coverage of 42 linear feet per pint
  • Can be painted after it develops a skin

Cons:

  • The listed availability may limit whether you can buy this size
  • Requires a skinning period before painting is recommended

Verdict: Consider the pint of Sarco Type M for a smaller wood-sash project if it is available and its shop-work application suits your repair.

3. Sarco Type M in a Quart: More Coverage for a Bigger Job

This quart-size Sarco Type M is the larger container option for projects that need more putty. The product information lists coverage at 84 linear feet, double the stated coverage of the pint listing. That makes the quart easier to consider when you’re estimating material for several panes or a longer run of sash.

The supplied details for this specific listing are limited to the product name, size, and coverage. They do not give separate application, curing, or painting instructions for the quart. If you’re comparing it with the Type M pint, check the current product listing and package directions rather than assuming every detail is identical.

Coverage is a useful planning guide, not a guarantee of how far the compound will go in your window. The amount needed depends on the size and shape of the glazing lines and how much material each repair takes. For one small pane, this container may be more than you need; for a larger project, the stated coverage can help you decide whether a quart is a better fit.

Pros:

  • Stated coverage of 84 linear feet
  • Larger size may suit multi-pane or longer projects
  • Listed as Sarco Type M glazing putty

Cons:

  • Less product-specific application information is supplied for this listing
  • May be more material than needed for a single small repair

Verdict: Pick the quart-size Sarco Type M when the stated coverage better matches your project, and confirm the package instructions before application.

4. Red Devil 0664: A Quart of Oil-Based, Knife-Grade Putty

Red Devil 0664 is a pre-mixed, oil-based glazing compound sold in a one-quart tub. It beds and sets glass in wood and metal sash, and is also described for new construction, existing-window repairs, and storm windows. Its knife-grade body is intended to hold its shape while you tool a clean glazing line.

The product information describes it as permanently flexible and resistant to sagging, shrinking, and cracking. It also lists adhesion to glass, wood, masonry, and aluminum. The compound can be painted immediately with oil-based paint; the suggested drying times are 24 hours for oil paint and three to four days for latex to maximize results.

For easier tooling, the directions say to knead the putty and dip the blade in mineral spirits. Apply it above 40°F. The listed restrictions matter: it is not for plastic windows, organically sealed insulated glass, or panes over 48 inches. This quart is a more sensible option for several panes than a half-pint, but it may be excessive for a small touch-up.

Pros:

  • Pre-mixed, oil-based putty with a knife-grade body
  • Suitable for wood and metal sash and multiple repair types
  • Can be painted immediately with oil-based paint
  • Listed as resistant to sagging, shrinking, and cracking

Cons:

  • Not intended for plastic windows, organically sealed insulated glass, or panes over 48 inches
  • Application is limited to temperatures above 40°F

Verdict: Red Devil 0664 is a strong fit for larger reglazing work on compatible windows when you want a pre-mixed, knife-grade compound and need a quart-sized tub.

5. Red Devil 0662: A Half-Pint for a Few Panes

Red Devil 0662 is the smaller, half-pint version of the brand’s pre-mixed glazing compound. It is designed to bed and set glass in wood and metal sash, making the size a practical consideration for a few panes or a limited repair rather than a broad reglazing project.

Like the quart-size 0664, this is an oil-based, knife-grade putty described as permanently flexible and resistant to sagging, shrinking, and cracking. It is ready to use from the tub after kneading. The listed instructions recommend applying above 40°F and dipping the blade in mineral spirits to make tooling easier.

Oil-based paint can go on immediately, while the supplied information suggests allowing 24 hours for oil paint or three to four days for latex to maximize results. The same restrictions apply: this compound is not for plastic windows, sealed insulated glass, or panes over 48 inches. If your project is larger, compare the quart-size 0664 to avoid running short.

Pros:

  • Smaller container suits limited reglazing jobs
  • Pre-mixed and ready to use after kneading
  • Designed for wood and metal sash
  • Accepts oil-based paint immediately

Cons:

  • May not provide enough material for multiple windows
  • Not suitable for plastic windows, sealed insulated glass, or panes over 48 inches

Verdict: Choose Red Devil 0662 when you need a ready-to-use compound for a few compatible panes and prefer a smaller container.

How to Choose Glazing Putty for Windows

Match the Compound to Your Window

Start with the sash and glass type. DAP ’33’ is listed for wood, metal, and aluminum sash. The Red Devil compounds are described for wood and metal sash, with additional adhesion information for other surfaces. Red Devil also specifically excludes plastic windows and sealed insulated glass, so check those limits before buying. If you’re working with a window type that is not clearly covered in the product details, confirm compatibility with the manufacturer.

Choose a Container Size That Fits the Job

For a small repair, a compact container may reduce leftover material. DAP ’33’ comes in 8 ounces, and Red Devil 0662 comes in a half-pint. For larger jobs, Red Devil 0664 comes in a quart, while Sarco Type M is available in pint and quart listings. The Sarco product information gives coverage estimates of 42 linear feet for a pint and 84 linear feet for a quart. Use those figures as planning estimates, since the amount required depends on the actual glazing lines.

Consider How You’ll Apply and Tool It

Some of the listed products provide more application detail than others. Red Devil describes its putty as knife-grade and recommends kneading it and dipping the blade in mineral spirits for easier tooling. Sarco Type M is described as workable under a knife or by hand. DAP is listed as ready to use. If a neat, consistent bevel is important, choose a product with instructions that suit your experience and tools.

Plan for Setting and Painting Time

Setting and skinning times differ. DAP says its compound sets within three weeks, with conditions affecting the timing. Sarco Type M is described as developing a skin in two days to a week, and its product information recommends painting once it skins. Red Devil says oil-based paint can be applied immediately, with suggested waiting times for oil and latex paint to maximize results. Follow the specific package directions and your paint manufacturer’s instructions.

Check Temperature and Other Limits

Application conditions can affect the job. Red Devil specifies applying above 40°F and lists limits for plastic windows, sealed insulated glass, and oversized panes. DAP notes that temperature, humidity, air movement, sunlight, and fill volume affect setting time. Read the label before beginning, especially if the window is outdoors or the weather is changing.

Think About the Project Location

DAP is specifically listed for interior and exterior use. Sarco Type M’s pint listing is framed around interior site work and recommends shop work after removing and restoring the window. Red Devil lists uses that include new construction, existing-window repairs, and storm windows. Choose based on the job you’re doing, and verify the product directions for the exact application.

Frequently Asked Questions

What is window glazing putty used for?

Glazing putty beds and secures glass in a sash and helps seal the joint around the pane. The products here are intended to help form a barrier against air and water, but the exact use depends on the window and the compound.

Can glazing putty be used on both wood and metal windows?

Several options in this guide are listed for both wood and metal sash. DAP ’33’ is also listed for aluminum sash. Check the product details and label for your specific window material before applying it.

How long should I wait before painting glazing putty?

There is no single wait time for every compound. DAP says setting can take within three weeks depending on conditions. Sarco Type M is described as skinning in two days to a week, with painting recommended once it skins. Red Devil allows immediate oil-based paint application and provides suggested drying times for oil and latex paint. Follow the directions for the product you choose.

Can glazing putty be used on insulated glass?

Check the product restrictions and the type of insulated glass. Red Devil’s listings exclude sealed insulated glass, and the quart-size listing specifically says it is not for organically sealed insulated glass. Do not use a compound on a window type that its instructions rule out.

How much glazing putty do I need?

Estimate the length of the glazing lines you plan to repair, then compare that with the listed container size and coverage. Sarco lists 42 linear feet for a pint and 84 linear feet for a quart. Actual use can vary with the size and shape of the repair.

Is a smaller tub better for a first repair?

A smaller tub can be a sensible choice when you have only a few panes to repair. DAP ’33’ comes in an 8-ounce container, and Red Devil 0662 comes in a half-pint. For more extensive work, compare those sizes with the quart options so you have enough material.

Final Recommendation

For a small repair, consider DAP ’33’ or the half-pint Red Devil 0662, depending on your sash material and preferred application details. For a larger job, Red Devil 0664 offers a quart of pre-mixed, knife-grade putty, while the Sarco Type M quart lists coverage of 84 linear feet. Before buying, confirm the product is compatible with your window and check its painting, temperature, and setting instructions.

Rate this post
Spread the love

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top