Product reviewDoors, Windows & Floors

Best Hold A Door Open: Top 5 Door Closers Compared

Updated 10 min read

Reader-supported: when you buy through links on our site, we may earn an affiliate commission at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases. Learn more.

When you need a door to stay open while you move carts, carry deliveries, or bring in fresh air, a door closer with a hold-open arm can be more dependable than a wedge. The five options below combine an adjustable hold-open feature with automatic closing, but they differ in door capacity, adjustment controls, and intended use. Start by checking your door’s weight, width, and safety requirements; the right fit matters as much as the hold-open feature.

Quick Comparison

ProductBest ForDoor CapacityKey Details
TITAN STRIKE TS8000 Commercial Door CloserBusy commercial entrances44–330 lb; 30–60 in wideANSI Grade 1, UL certified, three motion-control valves
TITAN STRIKE TS1000 Automatic Door CloserResidential and light-commercial doorsApproximately 80–150 lbUL certified; not for fire-rated doors
FORTSTRONG FS-7600 HOB Door CloserHigh-traffic commercial spacesUp to 330 lb; sizes 1–6UL listed, adjustable closing action, parallel-arm plate included
Baridwon Heavy Duty Door CloserDoors in a specific weight range143–187 lbTwo speed valves; three mounting options
MARIE Hold Open Door CloserLight residential and commercial doors55–99 lb; up to 32 in wideSize 2; adjustable closing and latching speeds

Our Picks: Best Hold A Door Open reviews

1. TITAN STRIKE TS8000: Best for Heavy-Duty Commercial Use

The TS8000 is the most adjustable, heavy-duty option in this group. Its hold-open arm can keep a door at a chosen angle for tasks such as moving stock or receiving deliveries, then allow the closer to return the door to a closed position. The spring strength adjusts across sizes 1–6 for doors listed at 44–330 pounds and 30–60 inches wide.

Its three independent valves control backcheck, latching speed, and delayed action. That gives you more control over how the door behaves than a model with only basic speed adjustments. The aluminum body has a corrosion-resistant finish, and the product is listed as ANSI/BHMA Grade 1, UL certified, and ADA compliant. It is also specified for testing to two million open-and-close cycles.

The TS8000 supports regular, top-jamb, and parallel-arm installation, and its non-handed design works with left- or right-hand doors. This makes it a versatile pick for facilities with varied entrances. Its range and control features may be more than a typical home door needs, and correct adjustment and installation are important for safe, smooth operation.

Pros:

  • Broad stated door-weight and width range
  • Three separate valves for motion control
  • Three mounting configurations and non-handed design
  • ANSI/BHMA Grade 1, UL certified, and ADA compliant

Cons:

  • May be more closer than needed for a light residential door
  • Installation and adjustment can take care to get right

Verdict: Choose the TS8000 for a high-traffic entrance or a heavier door when you want broad fit options and more control over the closing cycle.

2. TITAN STRIKE TS1000: Best for Residential and Light-Commercial Doors

The TS1000 is a medium-duty hydraulic closer for everyday use on doors weighing approximately 80–150 pounds. Its hold-open arm can be adjusted within the desired opening range, which can help when you are carrying items through a doorway or want to keep a door open temporarily for ventilation.

The hydraulic system lets you adjust closing speed to suit the door and traffic. Its aluminum construction and corrosion-resistant finish are specified for indoor and outdoor use, with a stated operating temperature range of -44°F to 151°F. It is designed for several door materials, including wood, metal, fiberglass, composite, vinyl, PVC, and compatible framed glass.

Regular, top-jamb, and parallel-arm mounting are supported, with the parallel-arm bracket included. The main limitation is important: the product information says this model is not for fire-rated doors. Its stated weight range is also narrower than the TS8000 and FORTSTRONG options, so check your door before choosing it.

Pros:

  • Hold-open arm for hands-free access
  • Adjustable closing speed
  • Three mounting configurations
  • UL certified and ADA compliant

Cons:

  • Not intended for fire-rated doors
  • Stated capacity is lower than the heavy-duty alternatives

Verdict: The TS1000 is a practical match for a compatible residential or light-commercial door, but do not use it on a fire-rated door.

3. FORTSTRONG FS-7600 HOB: Best for High-Traffic Walkways

The FORTSTRONG FS-7600 HOB is a commercial-style automatic closer designed for busy doors in places such as offices, schools, retail spaces, and public buildings. Its hold-open arm provides a way to keep the door open when needed, while the closer is designed to return it to a secure closed position.

The product is listed for sizes 1–6 and doors up to 330 pounds. Its adjustable sweep, latching motion, and backcheck functions let you tune how the door moves. The box includes a parallel installation plate, screws for wood and metal, and a fitting template, which can help you plan the installation.

Its capacity makes it a strong alternative to the TS8000 for many commercial applications, though the supplied description does not specify an ANSI/BHMA Grade 1 rating or ADA compliance. If either certification is required for your project, verify the applicable documentation before buying rather than assuming the features are the same as the TS8000.

Pros:

  • Listed for doors up to 330 pounds
  • Adjustments for sweep, latching, and backcheck
  • UL listed
  • Includes a fitting template and parallel installation plate

Cons:

  • Product details do not specify ANSI/BHMA Grade 1 or ADA compliance
  • Confirm the exact installation setup and required certifications for your doorway

Verdict: Consider the FS-7600 HOB for a busy commercial doorway when its capacity and adjustments fit, and confirm any certification requirements for your site.

4. Baridwon Heavy Duty Door Closer: Best for Doors Weighing 143–187 Pounds

This Baridwon closer is designed for a narrower, clearly stated door-weight range: 143–187 pounds. Its hold-open function is intended to keep the door open beyond 90 degrees when set up according to the instructions. That can be useful for carrying large items through a doorway, but it is not as broadly adjustable by door weight as the TS8000 or FORTSTRONG models.

The die-cast body and sealed hydraulic cylinder are built for routine use on home, office, or garage side doors. Two valves adjust closing and latching speed. The supplied instructions caution that these valves control speed, not the force needed to push the door open; adjust them gradually and avoid forcing the screws.

Regular-arm, top-jamb, and parallel-arm mounting are supported, with the bracket and mounting hardware included. Before ordering, consider the door’s weight as well as resistance from weather stripping or a tight threshold. The product information notes that extra drag can affect whether the closer can pull a door shut properly.

Pros:

  • Specific capacity range helps with matching a medium-heavy door
  • Hold-open function can be set above 90 degrees
  • Two speed valves for closing and latching
  • Three mounting options and included hardware

Cons:

  • Not a good match for doors outside its stated weight range
  • Only two speed adjustments are specified

Verdict: Pick the Baridwon if your door falls within its 143–187-pound range and you want a straightforward closer with three mounting options.

5. MARIE Hold Open Door Closer: Best for Lighter Doors

The MARIE closer is a size 2 option for lighter doors, with a stated capacity of 55–99 pounds and a maximum door width of 32 inches. It suits many residential doors and some light-duty commercial settings, provided your door falls within those limits.

Its hydraulic mechanism has separate adjustments for closing and latching speed. The cast-aluminum housing contains a rack-and-pinion mechanism, and the supplied parallel-arm bracket allows regular, top-jamb, or parallel-arm installation. The product information also lists a five-year warranty, which may appeal if you want a longer stated coverage period.

Compared with the TS1000, the MARIE is aimed at a lighter door and has a narrower maximum width. It may be a sensible fit for a smaller doorway, but it is not the pick for a heavy entrance or a door with substantial drag. Check the fit and installation instructions carefully before mounting.

Pros:

  • Designed for lighter doors from 55–99 pounds
  • Separate closing and latching speed adjustments
  • Three mounting configurations with hardware included
  • Product information lists a five-year warranty

Cons:

  • Maximum stated door width is 32 inches
  • Lower capacity than the commercial heavy-duty options

Verdict: Choose the MARIE for a light door within its weight and width limits; look to a higher-capacity model for a heavier or wider entrance.

How to Choose a Door Closer That Holds a Door Open

Match the closer to your door’s weight and width

Start with the door’s weight and width, then compare them with the closer’s stated capacity. A closer that is too strong can make a door harder to open, while one that is too weak may struggle to close it securely. The TS8000 covers the broadest stated range here; the Baridwon and MARIE models have narrower limits, so measure and check your door before ordering.

Check the hold-open setup you need

Hold-open arms are useful when you need a doorway to stay open temporarily for deliveries, carts, or airflow. Check how the particular arm is adjusted and whether the desired opening angle is supported. The Baridwon description specifies holding the door open beyond 90 degrees when installed according to its instructions. Do not assume every model holds open at the same angles or in the same way.

Consider closing controls and traffic

For a busy entrance, adjustable closing speed can help you tune the door’s movement. Latching-speed adjustment affects the final part of the closing cycle, while backcheck helps limit how sharply a door swings open. The TS8000 has separate backcheck, latching, and delayed-action valves; the FORTSTRONG also lists adjustments for sweep, latching, and backcheck. Simpler models may offer fewer controls.

Confirm certifications and fire-door requirements

If your doorway has accessibility, building-code, or facility requirements, verify that the selected closer has the certifications your project calls for. The TS8000 is listed as ANSI/BHMA Grade 1, UL certified, and ADA compliant; the TS1000 is listed as UL certified and ADA compliant. The TS1000 is specifically marked as not for fire-rated doors. Do not infer a certification from a product’s general commercial description.

Choose a mounting style that fits the doorway

These closers offer different combinations of regular-arm, top-jamb, and parallel-arm mounting. The right setup depends on the door, frame, swing direction, and available mounting surface. Check the included brackets and installation template against your doorway before starting. If you are replacing an existing closer, compare its mounting holes and configuration as well as its capacity.

Account for weather and door resistance

Weather stripping, a tight threshold, or other friction can make a door harder to close. Those factors matter when choosing a closer because the unit must overcome the door’s resistance while still being comfortable to open. A door that is out of alignment or has a binding hinge may need repair before a new closer can work well.

Think about installation and adjustment

Most of these products include hardware and instructions, and several include templates or multiple mounting parts. Still, a closer is a mechanical safety component, not just a convenience accessory. Follow the supplied installation and adjustment directions, make small changes to speed valves, and get qualified help if you are unsure about a commercial or regulated doorway.

Frequently Asked Questions

What is a hold-open door closer?

It is a door closer paired with an arm designed to keep the door open at a selected position. When the door is released from that position, the closer can return it to a closed position. The exact adjustment and operating range vary by model.

Can I use a hold-open closer on a fire-rated door?

Check the product’s documentation and the requirements for your doorway. The TS1000 listing specifically says it is not for fire-rated doors. Do not use a model on a fire-rated door unless its documentation and applicable requirements allow it.

How do I know what size closer I need?

Check the door’s weight and width, then compare them with the manufacturer’s stated range. Also account for resistance from weather stripping or a tight threshold. When replacing a closer, its existing size can be a useful clue, but verify that it suits the actual door.

Do these closers work on both left- and right-hand doors?

The TS8000 is described as non-handed, so it is designed for left- or right-hand doors. The supplied information does not state that all the other models are non-handed. Check each product’s mounting instructions for your door’s handing.

What is the difference between sweep speed and latching speed?

Sweep speed controls most of the door’s closing travel. Latching speed controls the final portion as the door approaches the frame. Adjusting both can help the door close smoothly, but follow the manufacturer’s directions and make small changes.

Can a door closer fix a door that does not close properly?

It may help if the problem is related to closing control, but it will not fix every cause. A misaligned door, binding hinge, or excessive threshold resistance can prevent proper closing. Address those issues before relying on a new closer.

Final Recommendation

For the broadest capacity and adjustment range, the TITAN STRIKE TS8000 is the strongest all-around choice in this group, especially for commercial or high-traffic doors. For a lighter residential or small-business door, consider the TS1000 if the door is not fire-rated, or the MARIE if your door falls within its lower weight and width limits. Match the closer to the door, confirm any required certifications, and follow the installation instructions for a dependable hold-open setup.

Rate this post
Spread the love

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top