If you’re choosing paint for a damp, shaded porch or exterior wall, look for a formula made to resist mildew and moisture—not just a paint labeled for outdoor use. The right choice also depends on what you’re painting: a wood porch, a concrete wall, and a brick foundation call for different kinds of protection. Below, we compare one dedicated mildew-resistant exterior paint with three alternatives suited to specific surfaces and moisture problems.
Table of Contents
Quick Comparison
| Product | Best for | Key details |
|---|---|---|
| Rust-Oleum Exterior Mildew Performance Paint | Exterior wood, brick, and concrete where mildew resistance matters | Satin finish; water-based; stated coverage of 350–400 sq. ft. per gallon |
| KILZ Basement and Masonry Waterproofing Paint | Concrete and masonry exposed to water infiltration | Interior/exterior use; blocks up to 12 PSI of water pressure |
| Zinsser WaterTite Professional Waterproofing Paint | Masonry walls that need a waterproof coating | For above- or below-grade masonry; covers up to 225 sq. ft. per gallon, depending on porosity and application |
| Rust-Oleum Painter’s Touch Latex Brush-On Paint | Small, multi-surface projects where a mildew-specific formula is not required | Interior/exterior use; semi-gloss finish; stated coverage up to 120 sq. ft. |
Our Picks: Best Mildew Resistant Exterior Paint reviews
Rust-Oleum Exterior Mildew Performance Paint: Best for Mildew-Prone Outdoor Surfaces
This is the most direct match for the target: a water-based exterior paint formulated to resist mildew and moisture. Its satin white finish is intended for surfaces such as siding, decks, and porches, and the product information also lists wood, brick, and concrete as suitable surfaces.
The stated coverage is 350–400 square feet per gallon. You can apply it with a brush, roller, or sprayer, and clean up with soap and water. That makes it a practical option for a range of outdoor jobs, though actual coverage can depend on the surface and how much paint it absorbs.
Its key advantage over the other picks is its explicit mildew-resistant positioning. It is not a waterproofing coating for stopping water pressure through masonry, so it is not the right fix for an actively leaking foundation wall. Also, paint alone will not solve a source of ongoing dampness; prepare the surface and address drainage or leaks before coating it.
Pros:
- Formulated to resist mildew and moisture
- Suitable for listed exterior surfaces including wood, brick, and concrete
- Water-based formula cleans up with soap and water
- Stated coverage of 350–400 square feet per gallon
Cons:
- Does not replace a waterproofing product where water pressure or active leaks are the problem
- White satin finish may not suit every exterior color or sheen preference
Verdict: Choose this Rust-Oleum paint when mildew resistance is your main goal for a compatible exterior surface; choose a masonry waterproofing coating instead if water is pushing through a wall.
KILZ Basement and Masonry Waterproofing Paint: Best for Water-Prone Masonry
KILZ is designed for concrete and masonry rather than general exterior siding or wood. Its stated uses include basement walls, stucco, brick, concrete blocks, and retaining walls, both indoors and outdoors. The product information says its coating blocks up to 12 PSI of water pressure and resists alkali buildup.
This is a better fit than ordinary exterior paint when the main concern is water infiltration through masonry. It is not described as a mildew-resistant paint, however, so it should not be treated as a direct substitute for the Rust-Oleum mildew-focused pick. It also is not for floors or walls with active water leaks. For below-grade use, the product directions call for filling holes and cracks with hydraulic cement first.
The paint dries to the touch in about an hour and is ready for a recoat in about four hours, with a full cure stated at seven to fourteen days. Plan around that cure time before washing or putting the coated area back into demanding service.
Pros:
- Made for interior and exterior masonry surfaces
- Designed to block water pressure up to 12 PSI
- Resists alkali buildup
- Stated recoat time is about four hours
Cons:
- Not intended for floors or walls with active water leaks
- Not specifically described as mildew-resistant
Verdict: Pick KILZ when your project is a masonry wall with water-infiltration concerns, but look elsewhere for a product specifically marketed for mildew resistance on a porch or other exterior surface.
Zinsser WaterTite Professional: Best for Waterproofing Masonry Walls
Zinsser WaterTite is a waterproofing paint for concrete, stucco, cement, cinder block, and other masonry surfaces. It is listed for above- and below-grade use, making it a specialized option for masonry walls rather than a general-purpose paint for decks, siding, or wood trim.
The product information states a lifetime waterproof guarantee and coverage of up to 225 square feet per gallon, depending on surface porosity and application method. It can be applied by brush or roller to wet or dry masonry and dries to a bright white, non-gritty finish.
Waterproofing and mildew resistance are related concerns in damp spaces, but they are not the same claim. This product is described as a waterproofing coating, not as a mildew-resistant exterior paint. Its lower stated coverage than the Rust-Oleum exterior paint may also mean you need more material for a similarly sized area, especially on porous masonry.
Pros:
- Made for several types of interior and exterior masonry
- Listed for above- and below-grade walls
- Can be applied to wet or dry masonry with a brush or roller
- Stated coverage is up to 225 square feet per gallon, depending on conditions
Cons:
- Not described as mildew-resistant
- Coverage varies with porosity and application method
Verdict: Choose Zinsser WaterTite for a masonry waterproofing job where its listed surface and application details fit; for mildew resistance on common exterior surfaces, Rust-Oleum is the more direct match.
Rust-Oleum Painter’s Touch Latex Paint: Best for Small Multi-Surface Jobs
Painter’s Touch is a water-based acrylic paint for a range of indoor and outdoor surfaces, including wood, metal, plaster, masonry, and unglazed ceramic. Its semi-gloss white finish and brush-on format make it a flexible option for smaller touch-ups or projects that involve several compatible materials.
The product information lists coverage of up to 120 square feet and a dry-to-touch time of about 30 minutes. It is described as low odor and resistant to chipping, but it is not identified as mildew-resistant. That distinction matters if the painted area stays damp or shaded: this paint should not be your first choice when mildew resistance is the main requirement.
Surface preparation is important. The directions call for sanding with 180- or 200-grit sandpaper, washing with a degreaser, and allowing the surface to dry before painting. Its smaller stated coverage also makes it less suited to large exterior walls than the Rust-Oleum Exterior Mildew Performance Paint.
Pros:
- Works on several listed indoor and outdoor surfaces
- Water-based acrylic formula is low odor
- Semi-gloss finish and brush-on application
- Stated dry-to-touch time is about 30 minutes
Cons:
- Not described as mildew-resistant
- Stated coverage is up to 120 square feet
Verdict: Painter’s Touch makes sense for smaller, varied-surface jobs where quick handling and broad surface compatibility matter more than a mildew-resistant formula.
How to Choose Mildew Resistant Exterior Paint
Match the paint to the surface
Start with the material you plan to coat. The Rust-Oleum mildew-resistant paint is listed for wood, brick, and concrete, while KILZ and Zinsser are focused on masonry. Painter’s Touch covers several surface types, but it is not identified as mildew-resistant. Always confirm that the product label includes your exact surface and intended use.
Know whether you need mildew resistance or waterproofing
A mildew-resistant coating is intended to help resist mildew growth on the painted surface. A waterproofing paint is designed to help limit water infiltration through masonry. Those are different jobs. If water is actively leaking through a wall, address the source and choose a product intended for that problem instead of relying on mildew-resistant paint alone.
Consider shade, moisture, and surface condition
Shaded areas and damp conditions can make mildew a recurring issue. Before painting, remove existing mildew and let the surface dry as directed by the paint manufacturer. Check for leaks, poor drainage, or other moisture sources as well. A new coating cannot make a persistently wet surface dry.
Compare coverage and project size
Coverage can affect how much paint you need and how many coats your project requires. The listed estimates here range from up to 120 square feet for Painter’s Touch to 350–400 square feet for Rust-Oleum Exterior Mildew Performance Paint. Zinsser’s estimate is up to 225 square feet per gallon and depends on porosity and application method. Rough, porous, or damaged surfaces may use more paint than a smooth surface.
Check finish and application method
Think about the look you want and how you plan to apply the paint. The mildew-resistant Rust-Oleum option has a satin finish and can be applied by brush, roller, or sprayer. Painter’s Touch has a semi-gloss finish and is described as brush-on. The masonry waterproofing paints have their own application directions, so follow the product label rather than assuming all exterior coatings are applied the same way.
Plan for preparation and drying time
Clean, sound surfaces help paint adhere as intended. Follow the label for sanding, cleaning, repairs, drying conditions, and recoat timing. For example, Painter’s Touch calls for sanding and degreasing, while KILZ says below-grade holes and cracks should be filled with hydraulic cement and that it is not for active leaks. Do not rush recoating or expose a fresh coating to demanding conditions before the label allows.
Frequently Asked Questions
What is the best mildew-resistant exterior paint in this list?
Rust-Oleum Exterior Mildew Performance Paint is the most direct choice because it is specifically described as mildew-resistant and is listed for exterior surfaces including wood, brick, and concrete.
Does mildew-resistant paint stop an active leak?
No. Mildew resistance is not the same as waterproofing. If water is actively entering through a wall, find and address the source of the leak. KILZ’s product information also says it is not for walls with active water leaks.
Can I use mildew-resistant exterior paint on brick or concrete?
The Rust-Oleum product information lists brick and concrete among its suitable surfaces. Check the product label and prepare the surface as directed before applying it.
Are the KILZ and Zinsser paints mildew-resistant?
The supplied product details describe them as waterproofing paints for masonry, but do not identify either as mildew-resistant. Choose them for their stated waterproofing uses rather than assuming they provide the same mildew protection as a dedicated mildew-resistant paint.
How much paint should I buy?
Use the coverage listed for the product as a starting point, then account for surface texture, porosity, condition, and the number of coats required by the label. Rough or porous masonry may need more paint than a smoother surface.
Can I paint over existing mildew?
Do not treat paint as a way to cover active mildew. Clean the affected surface and correct moisture problems before painting, following the coating label and appropriate cleaning guidance. A fresh coat will not fix the cause of recurring dampness.
Final Recommendation
For a porch, siding, or other compatible exterior surface where mildew resistance is the priority, Rust-Oleum Exterior Mildew Performance Paint is the clearest fit among these options. If your main issue is water infiltration through concrete or masonry, consider a waterproofing product such as KILZ or Zinsser instead—but confirm that its directions match your wall and moisture conditions. Painter’s Touch is a versatile option for smaller multi-surface projects, not a mildew-specific substitute.