Product reviewTools, DIY & Safety

Best Non Slip Tile Paint: Compared Options and Buying Tips

Updated 9 min read

Reader-supported: when you buy through links on our site, we may earn an affiliate commission at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases. Learn more.

Choosing the best non-slip tile paint starts with matching the coating to the surface. A refinishing kit made for ceramic tile is not the same as a floor coating for a tiled walkway, and some products that sound suitable for tile are not made for it at all. Of these three options, Bathworks is the clearest fit for refinishing tile, while Dura Grip is aimed at durable floor and deck surfaces. RTG’s shower and tub coating is specifically not for tile or ceramic.

Use the product instructions to confirm surface compatibility and preparation before you buy. The right coating can add traction, but the wrong one may not bond well or hold up to wet use.

Quick Comparison

ProductBest forSurface compatibilityKey consideration
RTG Shower & Tub Non-Slip PaintAcrylic, fiberglass, and enamel tubsNot for tile or ceramicRequires sanding and careful surface preparation
Bathworks Essentials Tub & Tile Refinishing KitRefinishing tubs, showers, and tilePorcelain, ceramic tile, fiberglass, acrylic, and cast ironHard, glossy surfaces need etching for a stronger bond
Dura Grip Anti-Slip PaintTextured floors, decks, ramps, and other surfacesIncludes tile, concrete, wood, metal, and moreTextured coating is designed for floor use, not tub refinishing

Our Picks: Best Non Slip Tile Paint reviews

Bathworks Essentials: Best All-Around Choice for Tile Refinishing

Bathworks is the most direct match here if you want to refinish tile and add slip resistance. The kit is designed for tubs, showers, sinks, and countertops, and its listed compatible surfaces include ceramic tile and porcelain as well as acrylic, fiberglass, and cast iron. A non-slip additive mixes into the coating, so traction is part of the refinishing system rather than a separate step.

The kit includes the coating, hardener, liquid primer, non-slip additive, a mixing container, and instructions. It covers one standard tub or up to 60 square feet, according to the product information. Applicator tools and prep supplies are sold separately, so plan for those before starting.

Preparation matters, especially on hard, glossy tile. Bathworks specifies using its EZ-Etch product on tile, porcelain, ceramic, and cast iron to help the coating bond; etching is not needed on acrylic or fiberglass. This makes the kit more versatile than RTG for tile, but it also adds a prep step. Its high-gloss white finish is intended to resemble a restored factory finish, which may suit a full surface refresh better than a simple floor-only traction coating.

Pros:

  • Specifically lists ceramic tile and porcelain among compatible surfaces
  • Includes a non-slip additive, primer, hardener, and mixing container
  • Designed for several bathroom surfaces, including tubs, showers, and sinks
  • Listed coverage is one standard tub or up to 60 square feet

Cons:

  • Etching is needed for a stronger bond on glossy tile and other hard surfaces
  • Applicator tools and prep supplies are sold separately

Verdict: Choose Bathworks if you need a tile-compatible bathroom refinishing kit with non-slip additive and are prepared to follow the surface-prep steps.

Dura Grip: Best Textured Coating for Floors and Ramps

Dura Grip is a textured anti-slip coating for floors and other hard-use areas. Its listed applications include decks, ramps, garages, stairs, pools, and laundry rooms, and the product description names tile among its compatible surfaces. Unlike a tub-refinishing kit, it is positioned as a floor and surface coating for residential or commercial use.

The coating is described as UV-resistant and durable, with a textured finish intended to provide traction while remaining comfortable for bare feet. It can be applied with a 3/8-inch nap roller. Coverage is listed as up to 75 square feet per quart or 300 square feet per gallon, which can help when estimating how much to buy.

The tradeoff is that the textured, floor-focused finish may not be the right look or feel for every bathroom tile project. The product information does not provide tile-specific preparation details, so confirm the label’s instructions for your exact tile and location before applying it. Compared with Bathworks, Dura Grip is the more natural fit for a larger floor, deck, or ramp; Bathworks is more clearly aimed at refinishing bathroom tile and fixtures.

Pros:

  • Lists tile among its compatible surfaces
  • Designed for floor, deck, ramp, stair, and other demanding applications
  • Can be applied with a 3/8-inch nap roller
  • Listed coverage is up to 75 square feet per quart

Cons:

  • Does not provide tile-specific preparation details in the supplied product information
  • Its textured floor coating is not presented as a tub-refinishing product

Verdict: Consider Dura Grip for a tile floor or other hard-use surface when you want a textured coating, but confirm surface preparation and suitability for your specific tile first.

RTG Shower & Tub Paint: Best for Non-Tile Tub Surfaces

RTG Shower & Tub Non-Slip Paint is included as a useful comparison, but it is not a tile paint. The product information specifically says not to use it on porcelain, tile, or ceramic surfaces. It is intended for acrylic, fiberglass, and enamel surfaces that are in good condition, such as a compatible tub or shower base.

Its non-abrasive traction additive is designed to feel less rough on bare feet than a coarse grit finish. The coating can be applied by brush or roller, and the product description says it can be recoated in as little as one hour. It is ready to use 48 hours after the final coat. The listed coverage is 80 to 100 square feet per quart.

Surface preparation is essential: the surface must be completely clean and dry, and it needs sanding for the finish to stick. The white color is described as off-white with a slight blue tint, so it may not match every existing surface. Compared with Bathworks and Dura Grip, RTG is a narrower choice: it may suit a compatible non-tile tub, but it should be ruled out for tile itself.

Pros:

  • Designed for acrylic, fiberglass, and enamel surfaces in good condition
  • Non-abrasive traction additive is intended to be comfortable for bare feet
  • Can be applied by brush or roller and recoated in as little as one hour
  • Listed coverage is 80 to 100 square feet per quart

Cons:

  • Not for porcelain, tile, or ceramic surfaces
  • Requires thorough cleaning, drying, and sanding before application

Verdict: Choose RTG only for a compatible acrylic, fiberglass, or enamel tub surface—not for tile flooring, ceramic walls, or a porcelain surface.

How to Choose Non-Slip Tile Paint

Match the coating to the exact surface

Start by identifying what you plan to coat: ceramic tile, porcelain, a tub, or another floor surface. Product names can be broad, so check the listed compatible materials and exclusions. Bathworks names ceramic tile and porcelain as compatible surfaces, while RTG explicitly excludes tile and ceramic. Dura Grip lists tile, but it is primarily positioned as a floor and hard-use surface coating.

Think about where you will use it

A shower floor, tub, bathroom floor, deck, and ramp have different needs. For bathroom refinishing that includes tile, Bathworks is the clearest match in this group. For a floor or other hard-use area where a textured finish makes sense, Dura Grip may be a better fit. Do not assume that a coating made for a tub is suitable for tiled flooring, or that a floor coating is intended for a tub basin.

Check the texture and barefoot feel

Non-slip coatings can have different surface textures. RTG describes its additive as non-abrasive and comfortable for bare feet, but it is not for tile. Dura Grip is a textured coating intended for traction on floors and other surfaces. Bathworks includes a non-slip additive while aiming for a high-gloss refinished look. Consider who will use the surface and whether the finish is comfortable and appropriate for that location.

Plan for surface preparation

Coatings need a properly prepared surface to bond. Bathworks calls for etching on glossy tile, porcelain, ceramic, and cast iron; Dura Grip’s supplied details do not spell out tile-specific preparation, so consult its product instructions for your surface. RTG requires the surface to be completely clean and dry, with sanding before application. Skipping required preparation can undermine the finish.

Estimate coverage and supplies

Compare the listed coverage with the area you want to coat, but treat it as a planning estimate rather than a guarantee. Bathworks lists coverage of one standard tub or up to 60 square feet; Dura Grip lists up to 75 square feet per quart; RTG lists 80 to 100 square feet per quart. Also check what is included. Bathworks includes coating components and a mixing container, but applicator tools and prep supplies are sold separately.

Consider cure time and project timing

Follow the specific product instructions for recoating and when the surface can return to use. RTG says it can be recoated in as little as one hour and is ready to use 48 hours after the final coat. The supplied details for the other products do not state a cure schedule, so check their instructions before planning a bathroom or floor project.

Frequently Asked Questions

Can I use RTG Shower & Tub Non-Slip Paint on tile?

No. Its product information specifically says not to use it on porcelain, tile, or ceramic. It is intended for compatible acrylic, fiberglass, and enamel surfaces in good condition.

Which option is the clearest choice for ceramic tile?

Bathworks is the clearest fit for ceramic tile because its product information lists ceramic tile and porcelain as compatible surfaces. It also includes a non-slip additive. Hard, glossy surfaces need etching for a stronger bond.

Can I use Dura Grip on a tile floor?

Dura Grip lists tile among its compatible surfaces and is designed for floor and other hard-use applications. The supplied product details do not explain tile-specific preparation, so check the product instructions for your exact tile and intended location before applying it.

Does non-slip paint make a surface completely slip-proof?

No coating should be treated as a guarantee against slips. Traction can vary with the surface, water, soap, wear, and how the product is applied. Follow the instructions and use other sensible safety measures in wet areas.

Do I need to prepare tile before applying a coating?

Yes, preparation is important, but the steps depend on the product and surface. Bathworks calls for etching on hard, glossy surfaces such as tile and porcelain. Check the instructions for any cleaner, sanding, etching, or drying steps before you begin.

How much coating do I need?

Measure the area and compare it with the product’s listed coverage. Bathworks lists up to 60 square feet, Dura Grip lists up to 75 square feet per quart, and RTG lists 80 to 100 square feet per quart. Coverage can vary with the surface and application, so follow the product directions.

Which product should I choose for a bathtub?

For a tile or porcelain tub surface, Bathworks is the more suitable option in this comparison. For an acrylic, fiberglass, or enamel surface in good condition, RTG may fit, but it must not be used on tile, porcelain, or ceramic. Confirm the surface material before choosing.

Final Recommendation

For a non-slip coating that is explicitly suited to bathroom tile, Bathworks Essentials is the strongest match in this group, provided you are willing to complete the required preparation. Dura Grip is worth considering for tile floors and other hard-use areas where a textured floor coating is appropriate, but verify the tile-specific instructions first. Avoid RTG for any tile or ceramic surface; it is only an option for compatible non-tile tub materials.

Rate this post
Spread the love

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top