If an older bifold closet door sticks, sags, or slips out of its track, replacing the worn pivots and guides may be easier than replacing the whole door. The key is matching the repair parts to your track, door thickness, and door weight. These five options include replacement-parts kits as well as a set with new tracks, so check what is included before you buy.
Table of Contents
Quick Comparison
| Product | What’s included | Fit notes | Best for |
|---|---|---|---|
| BUDONI Bifold Door Hardware Repair Kit | Two repair kits with pivots, guide wheels, brackets, and fasteners | 7/8- to 1-inch track; doors 1 to 1⅜ inches thick; up to 50 lb | Replacing common worn parts while keeping the existing track |
| CRANACH Bifold Door Hardware Repair Kit | Two repair kits with pivots, guide wheels, and brackets | Doors 1 to 1⅜ inches thick; up to 50 lb | A parts-focused repair with spring-loaded components |
| HARSKIYER 16-Piece Bifold Door Hardware Kit | Pivots, guide wheels, and spring-loaded parts | Check the product dimensions against your door and track | Replacing selected damaged hardware after confirming measurements |
| Ocyfym Closet Bifold Door Hardware Kit | Brackets, guide wheels, pivots, and mounting screws | 1-inch track; doors 1 to 1⅜ inches thick; up to 30 lb per panel | Repairing doors with a 1-inch track and lighter panels |
| kaicileo Bifold Closet Door Hardware Kit with Tracks | Tracks, brackets, pivots, guide wheels, hinges, and mounting hardware | 60-inch set with two 30-inch tracks; up to 50 lb per door | Replacing the track and hardware together for two bifold doors |
Our Picks: Best Old Style Bi Fold Door Hardware reviews
1. BUDONI Bifold Door Hardware Repair Kit: Best for a Broad Replacement Set
The BUDONI kit is a two-pack of replacement parts for repairing bifold doors without changing the existing track. Each pack includes metal and plastic top pivots, bottom pivots, guide wheels, top and bottom brackets, fasteners, and an installation manual. The listing specifies compatibility with tracks from 7/8 to 1 inch wide and doors from 1 to 1⅜ inches thick, weighing up to 50 pounds.
Its broad parts selection is useful when several points of the door’s pivot-and-guide system are worn or damaged. The pivots and wheels use stainless steel and nylon PA6 plastic, and the product description notes that they are spring-loaded. The kit does not include a track or hinges, so it is best suited to a repair where the existing track and hinges are still in usable condition.
Compared with the CRANACH kit, BUDONI gives more detail about its track-width range and lists mounting fasteners in the package. Before ordering, compare the old parts and track with the stated measurements; similar-looking bifold fittings are not automatically interchangeable.
Pros:
- Two kits include a variety of pivots, wheels, brackets, and fasteners.
- Specified for 7/8- to 1-inch tracks and doors up to 50 pounds.
- Includes an installation manual with steps and diagrams.
Cons:
- Track and hinges are not included.
- You need to verify your existing track and door dimensions before ordering.
Verdict: Choose the BUDONI kit if your old track is sound and you want a well-specified set of common repair parts for a door within its stated size limits.
2. CRANACH Bifold Door Hardware Repair Kit: Best for Spring-Loaded Pivots
CRANACH’s two-pack is another repair-parts option for bifold closet doors. The listed components include metal and plastic pivots, a guide wheel, steel brackets, and screws. Its parts use steel and nylon PA6 plastic, and the pivots and guide wheel have built-in springs intended to help them move into the track and brackets during fitting.
The product is specified for doors 1 to 1⅜ inches thick and weighing up to 50 pounds. Its description gives component sizes, including a 7/8-inch top guide wheel, but does not state the compatible track-width range as clearly as the BUDONI listing. Check the product dimensions and compare them with your original parts before purchasing.
This kit may suit a repair where the track remains in place and the damaged parts are the pivots, wheel, or brackets. It does not list a replacement track or hinges, so it is not a full hardware replacement if those pieces also need work. The manual is intended to guide installation, but fit still depends on matching the old hardware and door setup.
Pros:
- Two kits provide replacement pivots, a guide wheel, and brackets.
- Spring-loaded parts are designed to help with alignment and fitting.
- Specified for doors up to 50 pounds and 1 to 1⅜ inches thick.
- Includes an installation manual.
Cons:
- The compatible track-width range is not stated as directly as it is for some alternatives.
- Does not include a replacement track or hinges.
Verdict: Consider CRANACH if its listed part dimensions match your existing hardware and you want a two-pack with spring-loaded replacement components.
3. HARSKIYER 16-Piece Bifold Door Hardware Kit: Best for a Measured Parts Swap
HARSKIYER’s 16-piece set includes top metal pivots, bottom pivots, plastic guide wheels, and spring-loaded parts. The product description identifies steel and plastic construction and says the kit is intended for repairing bifold doors and other folding-door applications.
Unlike the BUDONI and Ocyfym options, the supplied details do not give a track-width range, door thickness, or weight limit. Instead, the listing asks shoppers to use the dimensions and parts information shown in its product images. That makes careful measuring especially important. Match the replacement parts to your old fittings before ordering, rather than relying only on the general “bifold” label.
This is a parts-only option, not a complete track-and-hardware system. It could make sense when you have already identified the damaged components and confirmed the kit’s dimensions. If you need a more clearly stated weight or track specification, the BUDONI or Ocyfym kits provide more information in the supplied product details.
Pros:
- Includes pivots, guide wheels, and spring-loaded parts.
- Uses steel and plastic components.
- Designed for repairing existing folding-door hardware.
Cons:
- Track compatibility, door thickness, and weight limits are not specified in the supplied description.
- Check the product images for dimensions before buying.
Verdict: Pick HARSKIYER if you can confirm from the listed dimensions that its parts match your old hardware; otherwise, a kit with clearer fit specifications is the safer choice.
4. Ocyfym Closet Bifold Door Hardware Kit: Best for a 1-Inch Track
This 12-piece kit includes top and bottom brackets, guide wheels, plastic top pivots, bottom pivot pins, spring-loaded metal pivot pins, and mounting screws. It is designed for a 1-inch-wide track and bifold panels from 1 to 1⅜ inches thick. The stated capacity is up to 30 pounds per panel, so it is important to compare that limit with your door.
The parts are made from steel and nylon PA6 plastic. The spring-loaded pivots and guide wheels are intended to help with alignment, while the product description says the kit is surface-mounted without cutting mortises. It does not include a replacement track, making it a repair option for doors whose existing track is still suitable.
Its clearly stated track size is useful if you have measured a 1-inch track. However, the weight limit is lower than the 50-pound capacity stated for the BUDONI and CRANACH kits. That makes the Ocyfym set a more specific fit rather than a universal pick. Verify both the track width and the weight of each panel before ordering.
Pros:
- Specifies a 1-inch track and 1- to 1⅜-inch door thickness.
- Includes brackets, pivots, guide wheels, and mounting screws.
- Spring-loaded components are designed to help with alignment.
- Surface-mount design does not require cutting mortises.
Cons:
- Capacity is limited to 30 pounds per panel.
- Does not include a new track.
Verdict: Choose Ocyfym when your door uses a 1-inch track and each panel falls within its stated weight limit.
5. kaicileo Bifold Closet Door Hardware Kit with Tracks: Best for Replacing the Track Too
Unlike the other options here, this kit includes tracks as well as the related hardware. The listed 60-inch set has two 30-inch tracks and is intended for two two-panel bifold doors. It also includes brackets, pivots, guide wheels, hinges, and mounting hardware, making it the broadest option for a project where the old track is damaged or missing.
The product description specifies doors from 1 to 1⅜ inches thick and a capacity of up to 50 pounds per door. It also gives sizing guidance: door width should be the track length minus 1/2 inch, and door height should be 1 to 1½ inches less than the rough opening height. The track can be cut to fit, but measure the opening and confirm the set’s configuration before starting the project.
A full set can save you from trying to match new pivots to an old, worn track, but it includes more components than you need if the track and hinges are already in good shape. For a simple repair, one of the parts-only kits may be a better match. This kit is most compelling when you plan to replace the track and the moving hardware together.
Pros:
- Includes tracks, hinges, pivots, guide wheels, brackets, and mounting hardware.
- The 60-inch set contains two 30-inch tracks for two bifold doors.
- Specified for doors up to 50 pounds and 1 to 1⅜ inches thick.
- Provides guidance for sizing the door to the opening.
Cons:
- More hardware than needed if you only have to replace a pivot or guide wheel.
- You must confirm track length and opening measurements before installation.
Verdict: Select kaicileo if you need a track-and-hardware replacement for two bifold doors, rather than a small repair to an otherwise sound system.
How to Choose Old-Style Bifold Door Hardware
Decide Whether You Need Parts or a Complete Track Set
Start by checking the condition of your existing track, brackets, and hinges. If the track is straight and firmly attached, a repair kit with pivots and guide wheels may be enough. If the track is damaged, missing, or incompatible with replacement parts, consider a kit that includes a new track, such as the kaicileo set.
Measure the Track and Existing Hardware
Track width and the dimensions of pivots and guide wheels can vary. Measure the track opening and compare the shape and size of your old parts with the product details. BUDONI lists compatibility with 7/8- to 1-inch tracks, while Ocyfym specifies a 1-inch track. For products without a clearly stated track range, check the dimensions shown in the listing before ordering.
Check Door Thickness and Weight
Door thickness and weight affect whether replacement hardware is suitable. BUDONI and CRANACH specify doors 1 to 1⅜ inches thick and up to 50 pounds. Ocyfym lists the same thickness range but a lower limit of 30 pounds per panel. Confirm the product’s capacity applies to your door configuration, and do not assume all bifold kits support the same load.
Count the Panels and Doors
Identify whether you have one two-panel door, two two-panel doors, or another arrangement. A parts kit may provide hardware for repairs without covering every component in a larger setup. The kaicileo set is described as a 60-inch configuration with two 30-inch tracks for two two-panel doors; check that this matches your opening and project.
Look at the Included Components
Compare the parts list with the hardware you plan to replace. Kits may include different combinations of top pivots, bottom pivots, guide wheels, brackets, screws, and hinges. Also note what is not included: the BUDONI kit, for example, specifically excludes the track and hinges. Buying a kit with unnecessary parts may not be worthwhile, while missing a needed bracket can delay the repair.
Consider the Installation Work
Some kits describe spring-loaded parts intended to help with fitting or alignment, and some include instructions or diagrams. Still, an installation guide does not replace checking your door’s dimensions and setup. If the door opening, track position, or existing hardware differs from the kit’s stated requirements, stop and confirm compatibility before removing the old parts.
Frequently Asked Questions
Can I replace bifold door pivots without replacing the track?
Often, yes, if the track is in good condition and the replacement pivots and guide wheels match it. The BUDONI, CRANACH, HARSKIYER, and Ocyfym products are parts-focused kits and do not list a replacement track. Confirm the fit of the parts before ordering.
How do I know which bifold door hardware kit fits?
Measure the track width, door thickness, and the old pivots and guide wheels. Then compare those measurements with the product’s stated dimensions and compatibility information. Also check the door’s weight against the kit’s limit.
Do these kits include a new track?
Most of the kits in this guide are replacement-parts sets rather than complete track systems. The kaicileo kit is the option that lists tracks, along with brackets, pivots, guide wheels, hinges, and mounting hardware.
Are all bifold hardware kits rated for the same door weight?
No. The supplied details list limits of up to 50 pounds for BUDONI and CRANACH, up to 30 pounds per panel for Ocyfym, and up to 50 pounds per door for the kaicileo track set. HARSKIYER’s supplied description does not state a weight limit.
Can I use a kit labeled for a 1-inch track on a different track size?
Do not assume it will fit. Ocyfym specifies a 1-inch-wide track, while BUDONI lists a range from 7/8 to 1 inch. If your track differs, check the product’s dimensions or choose a kit whose stated range includes your measurement.
When should I replace the full bifold door hardware system?
A full system may be a better choice when the track and several moving parts are damaged, or when you want to replace the track and hardware together. If only a pivot or guide wheel is worn and the rest of the system is sound, a compatible parts kit may be all you need.
Conclusion
For a typical repair where the existing track is still usable, the BUDONI kit stands out for its specified track range, door limits, and broad set of replacement parts. Choose Ocyfym if your track is 1 inch wide and your panels fall within its lower weight limit. If the track also needs replacing, the kaicileo set offers a more complete system. In every case, measure first: matching the replacement hardware to your old door is the most important step toward a successful repair.
