Product reviewOutdoor, Pools & Hot Tubs

Best Outdoor Paint For Brick: Top Picks Compared for Every Project

Updated 8 min read

Reader-supported: when you buy through links on our site, we may earn an affiliate commission at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases. Learn more.

Choosing the best outdoor paint for brick starts with matching the coating to the surface and the job. Some paints are made to refresh brick’s appearance, while others focus on moisture protection. The options below include a versatile masonry paint, two smaller specialty paints, and a waterproofing coating. Before you buy, consider your project size, the look you want, and whether the brick has moisture problems that need to be addressed first.

Quick Comparison

ProductBest forFinish or featureSize
KILZ Self-Priming Masonry, Stucco and Brick PaintGeneral brick and masonry projectsFlat, self-priming1 gallon
MOLLOR Brick Paint Fireplace Makeover KitSmall refreshes and whitewash effectsLow-odor, water-based; can be diluted16 oz
Hensire Black Exterior Wall PaintSmall exterior masonry touch-upsMatte, self-priming17 fl oz
KILZ Basement and Masonry Waterproofing PaintWaterproofing suitable masonry wallsWater-resistant coatingCheck product listing

Our Picks: Best Outdoor Paint For Brick reviews

1. KILZ Self-Priming Masonry Paint: Best All-Purpose Option

This one-gallon acrylic latex paint is made for interior and exterior masonry, stucco, and brick. Its flat white finish suits projects where you want to cover the existing color while keeping the surface’s texture visible.

The self-priming formula is designed for properly prepared smooth, rough, and textured surfaces. It is alkali-resistant up to pH 12 and can be brushed, rolled, or sprayed. KILZ lists coverage of 250 to 400 square feet per gallon, with the actual amount depending on surface texture. Rough, porous brick may use more paint than a smooth wall.

Compared with the smaller specialty paints here, this is the more practical choice for larger areas. It is not described as a waterproofing product, so choose it for coating and refreshing masonry—not as a fix for water entering through a wall.

Pros:

  • Made for brick, stucco, and other masonry surfaces.
  • Self-priming on properly prepared compatible surfaces.
  • Can be applied by brush, roller, or sprayer.
  • One-gallon size and stated coverage suit larger projects.

Cons:

  • Flat white may not fit every color or finish preference.
  • Coverage varies with the texture and porosity of the brick.

Verdict: Choose this KILZ paint for a straightforward, larger brick or masonry refresh when you want a flat finish and a self-priming formula.

2. MOLLOR Brick Paint Kit: Best for Small Whitewash Projects

MOLLOR’s 16-ounce water-based paint is aimed at refreshing brick, stone, and concrete, including fireplace surrounds and accent walls. The kit includes painting tools, which may be convenient if you are working on a small makeover and do not already have supplies.

The white paint can be diluted with 10% to 20% clean water to create a lighter whitewash effect. Because the product is sold in a small container and no coverage figure is provided in the supplied details, it is best suited to a limited area rather than a whole exterior wall. Test a hidden spot first to judge the color and transparency on your brick.

The product is described for indoor and outdoor use and as resistant to outdoor conditions. Still, the package size makes this a specialty option rather than the most practical pick for broad coverage. The product description also calls for careful pre-work, so follow its directions and prepare the masonry before applying it.

Pros:

  • Includes tools for a small painting project.
  • Can be diluted for a lighter whitewash look.
  • Designed for brick, stone, and concrete.
  • Water-based, low-odor formula.

Cons:

  • The 16-ounce size may be too small for a large wall.
  • No coverage amount is provided in the supplied product details.

Verdict: Consider MOLLOR for a small brick accent or fireplace refresh, especially if you want a whitewash effect and appreciate having basic tools in the kit.

3. Hensire Exterior Masonry Paint: Best for Small Matte Touch-Ups

Hensire’s water-based paint is designed for exterior brick, concrete, cement, stone, stucco, and masonry walls. Its matte finish and available colors—white, light gray, and black—make it worth considering for a small facade, garden wall, or touch-up where those shades fit your plan.

The formula is self-priming on properly prepared compatible surfaces and is described as weather-resistant and water-repellent. The product information gives coverage of up to 11 square meters per liter, depending on porosity, texture, and application method. At 17 fluid ounces, this container is better suited to a limited area than a large exterior project.

The paint is described as touch-dry in about two to three hours, with recoating after four hours. Those times are product estimates, so check the label and account for the conditions during your project. Compared with the gallon-size KILZ paint, Hensire offers a smaller-format option and specific matte color choices, but less paint for broad coverage.

Pros:

  • Made for several exterior masonry surfaces, including brick.
  • Self-priming on properly prepared compatible surfaces.
  • Matte finish with white, light gray, and black options.
  • Provides a stated coverage estimate and recoat timing.

Cons:

  • The 17-fluid-ounce size is limited for large walls.
  • Coverage depends on surface texture, porosity, and application.

Verdict: Hensire is a useful candidate for smaller exterior masonry jobs when you want a matte finish in one of its listed colors.

4. KILZ Waterproofing Paint: Best for Moisture-Prone Masonry Walls

This KILZ product is a waterproofing coating for concrete and masonry surfaces, including brick, cinder block, stucco, and retaining walls. Its purpose differs from a general decorative masonry paint: it is designed to help resist water infiltration, with the product description stating protection against water pressure up to 12 PSI.

It can be used indoors or outdoors and is formulated for moisture-prone areas. The listed dry-to-touch time is one hour, with a four-hour recoat time; full curing takes seven to fourteen days. For below-grade applications, the product information says to fill holes and cracks with hydraulic cement before painting.

This coating is not a solution for active water leaks and is not intended for floors. If moisture is entering through a brick wall, address the source and confirm that the surface is suitable before coating it. For a simple color change on dry exterior brick, the self-priming KILZ masonry paint above may be a closer match.

Pros:

  • Designed to help protect masonry from water infiltration.
  • Suitable for interior and exterior masonry walls.
  • Resists alkali buildup, according to the product description.
  • Includes application and curing information for planning.

Cons:

  • Not intended for floors or walls with active water leaks.
  • Below-grade holes and cracks need repair before application.

Verdict: Choose this option when moisture resistance is the priority and the wall is appropriate for the coating; do not use it to mask an active leak.

How to Choose Outdoor Paint for Brick

Match the coating to the job

Start by deciding whether you want to change the brick’s appearance or address moisture on a masonry wall. A general masonry paint is meant to coat and refresh a surface. A waterproofing coating has a different purpose and use restrictions. Neither should be treated as a substitute for repairing damaged mortar, leaks, or other underlying problems.

Check that the product is suitable for exterior masonry

Look for clear compatibility with brick and outdoor use. Products made for masonry may also list concrete, stucco, stone, or cinder block. Read the label for surface limits and preparation steps, since suitability can depend on the condition and location of the wall.

Consider the brick’s texture and porosity

Rough, porous brick can take more paint than a smooth surface. Use the product’s coverage estimate as a starting point, not a guarantee, and allow for variation across the wall. If no coverage figure is available, measure the area and check the label or product listing before deciding how much to buy.

Choose a finish and color carefully

A flat or matte finish can keep the look understated, while a whitewash effect lets some of the underlying brick color show through. If you are unsure how a color or dilution will look, test a small, inconspicuous section first and let it dry before committing to the whole surface.

Plan for preparation and drying

Remove loose dirt and flaking material, and make sure the surface is dry and in suitable condition before painting. Follow the product’s directions for repairs, priming, application, and recoat time. Weather, shade, and surface texture can affect how a project goes, so avoid rushing between coats.

Think about container size and application method

A gallon can is more practical for a broad wall than a small specialty container. For a small accent or touch-up, a smaller package can reduce leftover paint. Also check whether the coating can be brushed, rolled, or sprayed and whether any tools are included.

Frequently Asked Questions

Can I use regular exterior paint on brick?

Use a paint that specifically lists brick or masonry and exterior use. The product label should also explain preparation and any limits for the surface. A paint intended for another material may not be suitable for textured masonry.

Does brick need primer before painting?

It depends on the product and condition of the brick. KILZ Self-Priming Masonry Paint is described as self-priming on properly prepared surfaces. Follow the product directions, since “self-priming” does not remove the need to clean and prepare the wall.

How much paint do I need for a brick wall?

Measure the area and compare it with the coverage information on the product. KILZ lists 250 to 400 square feet per gallon for its self-priming masonry paint, depending on texture. Porous or rough brick may require more, and coverage varies by product.

Can I dilute brick paint for a whitewash look?

MOLLOR’s product information says it can be diluted with 10% to 20% clean water for a lighter whitewash effect. Test the mixture on a hidden area first, and follow the product directions rather than assuming every masonry paint can be diluted.

Can waterproofing paint fix a leaking brick wall?

No. The KILZ waterproofing product is not for walls with active water leaks. Find and address the source of the water before coating the surface, and follow the product’s repair instructions for the wall type and location.

How long should I wait before applying another coat?

Use the timing given for your specific paint. Hensire lists a four-hour recoat time, while the KILZ waterproofing paint lists four hours. Conditions can affect drying, so check the label before recoating.

Final Recommendation

For most exterior brick refreshes among these options, KILZ Self-Priming Masonry, Stucco and Brick Paint is the most versatile pick: it is made for exterior masonry, comes in a one-gallon size, and provides a stated coverage range. Choose MOLLOR for a small whitewash-style project, Hensire for a limited matte-color touch-up, or KILZ Waterproofing Paint when moisture protection is the main need and the wall is suitable for that coating.

Rate this post
Spread the love

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top