A shower liner for a walk-in shower needs to match the opening’s width and height, hang securely, and help keep water inside the shower area. The picks below include compact stall sizes, a longer option for taller openings, and standard-width liners. Measure your shower before choosing: a liner that is too short or narrow may leave gaps, while an oversized one can bunch up or drag.
Table of Contents
Quick Comparison
| Product | Size | Bottom weight | Best for |
|---|---|---|---|
| Mrs Awesome Clear PEVA Liner | 72 × 72 in. | 3 magnets | A standard-width opening and a lightweight liner |
| AmazerBath Stall Liner | 36 × 72 in. | 2 weighted stones | A narrow shower stall |
| Barossa Design Heavy-Duty Liner | 72 × 72 in. | 6 magnets | A standard-width shower with a magnetic tub edge |
| AmazerBath Long Stall Liner | 36 × 84 in. | 2 weighted stones | A narrow, taller shower stall |
| AmazerBath Weighted PEVA Liner | 72 × 72 in. | 3 weighted stones | A standard opening where reducing billow matters |
Our Picks: Best Shower Liner For Walk In Shower reviews
Mrs Awesome Clear PEVA Liner: A Lightweight Standard-Width Pick
This clear PEVA liner measures 72 by 72 inches and has three magnets along the bottom. It is a standard-size option rather than a narrow stall liner, so check that its width suits your walk-in shower opening before ordering. The clear material lets light through and can work on its own or behind a decorative curtain.
The liner has a reinforced top header and 12 rust-resistant metal grommets. Those details support hanging and help protect the holes from tearing with regular use. The manufacturer describes it as waterproof and recommends wiping it clean with a damp cloth.
The magnets are intended to help hold the bottom in place, especially against a cast-iron tub. That advantage may not carry over to a walk-in shower without a magnetic surface, so don’t count on the magnets alone to keep the liner from moving. Compared with the narrower AmazerBath stall options, this one offers more width but may be too wide for a compact opening.
Pros:
- Clear PEVA material with a lightweight design
- Three bottom magnets
- Reinforced header and 12 metal grommets
- Simple wipe-clean care
Cons:
- Its 72-inch width may be excessive for a narrow stall
- Magnets may be less useful without a magnetic tub or surface
Verdict: Choose this liner if you want a lightweight, clear standard-size option and have checked that 72 inches of width fits your shower.
AmazerBath 36 × 72-Inch Stall Liner: A Compact Fit for Narrow Openings
This clear PEVA liner is sized for a narrower stall, measuring 36 inches wide by 72 inches long. That compact width can be a better match than a standard 72-inch liner when your shower opening is small. It can be used by itself or as a liner behind a fabric curtain.
Two weighted stones at the bottom are designed to help limit billowing and keep the liner in place. It also has a reinforced header and six rust-resistant metal grommet holes. The smooth surface is intended to shed water, and the care instructions call for wiping it with a damp cloth.
The main tradeoff is its six hanging points, compared with the 12 grommets on the standard-width Mrs Awesome and AmazerBath options. Its 72-inch length may also be too short for a taller shower opening. Measure the opening and the distance from the rod to the shower base before deciding.
Pros:
- 36-inch width suits many compact stall openings
- Two weighted stones help hold the bottom down
- Reinforced header with metal grommet holes
- Can be used as a liner or on its own
Cons:
- Six grommet holes provide fewer hanging points than some alternatives
- 72-inch length may not suit a taller shower
Verdict: This is a practical option for a narrow opening when 36 by 72 inches matches your measurements.
Barossa Design Heavy-Duty Liner: Six Magnets for a Standard-Width Setup
The Barossa Design liner is a clear, heavy-duty PEVA option measuring 72 by 72 inches. It has six magnets at the bottom, twice as many as the Mrs Awesome liner in this guide. The added magnets may help keep the lower edge in place when they can attach to a suitable metal tub.
Its reinforced header and rust-resistant metal grommets are designed to support repeated hanging. The material is described as waterproof, PVC-free, and BPA-free, and the care instructions recommend wiping it clean. Its transparent look lets light pass through and keeps the shower area visually open.
This is still a standard-width liner, not a narrow stall curtain. Also, magnets are not a universal solution: they may offer little benefit if your walk-in shower has no metal surface for them to attach to. Compared with the AmazerBath 36-inch models, this pick provides substantially more width but is less suited to a compact stall.
Pros:
- Six bottom magnets for a magnetic tub edge
- Heavy-duty PEVA construction
- Reinforced header and rust-resistant metal grommets
- Clear design and wipe-clean care
Cons:
- May be too wide for a narrow shower stall
- Magnets may not help on nonmetal shower surfaces
Verdict: Consider this liner if you need a standard-width clear option and can make use of its bottom magnets.
AmazerBath 36 × 84-Inch Long Stall Liner: Extra Length for Taller Showers
This AmazerBath model keeps the narrow 36-inch width of the shorter stall liner but adds 12 inches of length, for a total size of 36 by 84 inches. That extra drop can be useful when a 72-inch liner would leave too much space below the rod or fail to reach far enough toward the shower base.
It is made from clear PEVA and has two weighted stones at the bottom. The reinforced header and six rust-resistant metal grommet holes are designed for hanging strength. The smooth surface is intended to help water bead and roll off, and the liner can be wiped clean with a damp cloth.
Extra length is only helpful when it fits the setup: a liner that hangs too low may bunch or drag. This model also has six grommet holes, so it offers fewer hanging points than the 12-hole standard-width options. Measure from the rod to the shower base, not just the height of the shower enclosure.
Pros:
- 84-inch length suits some taller shower setups
- Narrow 36-inch width for stall openings
- Two weighted stones to help reduce billowing
- Reinforced header and metal grommet holes
Cons:
- May hang too low in a shorter shower
- Six grommet holes provide fewer hanging points than 12-hole options
Verdict: Pick this longer stall liner if your measured opening needs 36 inches of width and an 84-inch drop.
AmazerBath Weighted PEVA Liner: A Standard-Size Choice with Weighted Stones
This 72-by-72-inch clear PEVA liner is designed for a standard-size shower or tub opening. Rather than magnets, it uses three weighted stones along the bottom to help reduce billowing. That makes it worth considering if you prefer weighted corners and edges over magnets, or if your shower does not have a magnetic surface.
The product description lists 12 rust-resistant metal grommet holes and a reinforced header. It is also described as a heavier liner with a softer feel than some liners of the same gauge. The manufacturer recommends using all 12 hooks for even tension and wiping the liner clean with a damp cloth.
Its main limitation is the standard width: it may bunch in a narrow walk-in stall. The weighted stones can help hold the liner down, but they cannot make an incorrectly sized liner fit well. For a compact opening, the 36-inch AmazerBath options are more appropriate; for extra height, the 84-inch stall version is the better match.
Pros:
- Three weighted stones help limit billowing
- 12 metal grommet holes and a reinforced header
- Clear, heavy-duty PEVA construction
- Can be used alone or with a fabric curtain
Cons:
- 72-inch width may be too large for a narrow stall
- Weighted stones do not replace careful sizing and placement
Verdict: Choose this liner if your opening needs a standard 72-inch width and you want weighted stones instead of magnets.
How to Choose a Shower Liner for a Walk-In Shower
Measure the Opening and the Hanging Height
Measure the width of the area the liner needs to cover, then measure from the curtain rod to the shower base or floor. Do not assume a walk-in shower needs a standard 72-inch width. The products here range from 36-inch stall widths to 72-inch standard widths, while their lengths range from 72 to 84 inches. Choose dimensions that cover the opening without leaving large gaps or dragging on the floor.
Think About How the Bottom Stays in Place
Some liners use magnets, while others use weighted stones. Magnets can be useful when they can attach to a metal tub, but they may not hold against nonmetal surfaces. Weighted stones add weight to the lower edge without relying on a magnetic surface. Neither approach guarantees that a liner will stay put in every shower, so proper width, hanging, and placement still matter.
Choose a Material and Opacity That Suit Your Bathroom
All five options in this guide use PEVA and have clear designs. A clear liner allows light through and can preserve an open feel in a smaller bathroom. If you prefer more privacy or a fabric look, these clear options may not meet that preference. Check the product details for material and care information before buying.
Check the Header and Hanging Points
A reinforced header helps support the curtain holes, while metal grommets provide the places to attach hooks. The products listed here have between six and 12 grommet holes. More holes can offer more hanging points, but your rod, hooks, and opening still need to work with the liner. Use the available hanging points as directed for a more even hang.
Consider Cleaning and Everyday Use
These liners are described as wipe-clean, which can make routine care straightforward. Follow the care instructions for the specific product and wipe away moisture or residue as needed. If you plan to use a liner behind a decorative curtain, check that its size will not pull or bunch when both are hung on the same rod.
Frequently Asked Questions
What size shower liner is best for a walk-in shower?
There is no single best size for every walk-in shower. Measure the width you need to cover and the drop from the rod to the shower base. A compact stall may suit a 36-inch-wide liner, while a wider opening may need a 72-inch option. Taller setups may need the 84-inch-long model.
Are magnets or weighted stones better?
It depends on your shower. Magnets may help when they can attach to a metal tub or surface. Weighted stones add weight without needing a magnetic surface. The size and placement of the liner also affect how well it stays in place.
Can I use a clear liner on its own?
Yes. The products described here can be used as standalone curtains or as liners, though check the individual listing for its intended use. A clear liner offers less visual privacy than an opaque curtain.
Will a 72-inch liner work in a narrow stall?
It may be too wide and could bunch. Measure your shower opening first. The 36-inch-wide options in this guide are designed for narrower stall setups.
How do I know whether I need an 84-inch liner?
Measure from the curtain rod to the shower base. An 84-inch liner may suit a taller setup, but it could drag or bunch in a shorter one. Choose the length that fits your measured hanging height.
How should I clean a PEVA shower liner?
The product descriptions recommend wiping these liners with a damp cloth. Follow the care directions for your chosen model, and avoid assuming that a cleaning method is suitable if the manufacturer does not list it.
Final Recommendation
For a narrow walk-in stall, start with the AmazerBath 36 × 72-inch liner if that size matches your measurements; choose the 36 × 84-inch version when you need extra length. For a standard-width opening, the AmazerBath 72 × 72-inch weighted liner is a strong option if you prefer stones, while the Barossa Design model offers six magnets for setups with a compatible metal surface. The best choice is the one that fits your shower dimensions and bottom-edge setup—not simply the one with the most features.
