Choosing the best tankless water heater for a condo starts with two checks: how much hot water you need at once and whether your unit’s electrical service can support the heater. The options below range from small under-sink units for one faucet to higher-power models intended to supply several fixtures. Before buying, confirm your building’s installation rules, available electrical capacity, and local requirements.
Affiliate disclosure: We may earn a commission when you buy through links on this page.
Table of Contents
Quick Comparison
| Product | Power | Best suited for | Key consideration |
|---|---|---|---|
| xwdzswgs 110V 3000W Tankless Water Heater | 110V, 3000W | A single sink or point of use | Not designed for showers |
| NOVIEEX 18kW Electric Tankless Water Heater | 240V, 18kW | Small-to-medium homes with multiple hot-water needs | Requires substantial electrical capacity |
| Rheem 8kW Multi-Fixture Tankless Water Heater | 240V, 8kW | Lower-flow, multi-fixture use | Up to 1.95 GPM; check panel requirements |
| Westinghouse 14kW WiFi Tankless Water Heater | 240V, 14kW | Up to two points of use | Requires a dedicated 60A double-pole breaker |
| Jflapil 110V 3000W Tankless Water Heater | 110V, 3000W | A single sink or point of use | Not intended for shower flow |
Our Picks: Best Tankless Water Heater For Condo reviews
1. xwdzswgs 110V 3000W: A Compact Pick for One Sink
This small 110V, 3000W heater is made for point-of-use hot water rather than supplying an entire condo. Its compact, wall-mounted design can fit near a kitchen or bathroom sink, and the LED display shows the temperature setting. The listing gives a temperature range tied to flow: about 82°F at 0.3 GPM and 131°F at 0.5 GPM.
The main advantage is that it can provide hot water close to a faucet without requiring a high-power 240V whole-home unit. It is also listed with 1/2-inch NPT connections and several safety features, including dry-boil and overheating protection. The product information says it is for vertical installation only, so placement matters.
Its limits are important. The listing says it is not suitable for showers, which typically require at least 1.8 GPM. It should be treated as a sink heater, not a solution for a condo’s full hot-water needs. If you need to serve a shower or multiple fixtures, consider a higher-capacity option and check your electrical service first.
Pros:
- Compact wall-mounted format for a tight installation area
- Uses a 110V connection rather than a 240V whole-home setup
- LED temperature display with Fahrenheit and Celsius options
- Listed with multiple protection features and IPX4 water resistance
Cons:
- Not suitable for shower flow or whole-condo hot-water service
- Must be installed vertically
Verdict: Choose this model only if you need a compact heater for a single sink and have confirmed its electrical and plumbing requirements.
2. NOVIEEX 18kW: The Higher-Capacity Condo Option
The NOVIEEX is a 240V, 18kW wall-mounted unit intended for small-to-medium homes, apartments, and condos. It has a digital temperature display and an adjustable range from 77°F to 140°F. Its slim profile may be useful where a storage tank would take up valuable floor space.
The product listing gives a maximum flow rate of 4.9 GPM and describes the unit as suitable for two to three simultaneous hot-water needs. Treat that as a stated maximum, not a guarantee at every temperature: the usable flow depends on incoming water temperature, desired outlet temperature, and the fixtures running at the same time.
Electrical fit is the key question for a condo. The listed requirements are 240V, a maximum current of 75A, two 40A double-pole breakers, and two sets of 8 AWG wire with ground. Have a qualified electrician confirm that your panel and building wiring can support those requirements. This model may offer more capacity than the smaller choices, but that capacity can make installation impractical in some units.
Pros:
- Higher stated capacity than the 8kW and 14kW options here
- Adjustable temperature control with a digital display
- Slim wall-mounted design helps save floor space
- Designed for more than one hot-water need at a time
Cons:
- Electrical requirements are substantial and need professional verification
- Maximum flow depends on water temperature rise and actual demand
Verdict: Consider the NOVIEEX if you need more flow than a point-of-use unit can provide and an electrician confirms your condo can support its demanding electrical setup.
3. Rheem 8kW: A Lower-Flow Multi-Fixture Model
Rheem’s 8kW electric model is a compact 240V heater with digital temperature controls that adjust in one-degree steps from 80°F to 140°F. The listed flow rate is up to 1.95 GPM, making it a smaller-capacity multi-fixture choice compared with the 14kW and 18kW units in this guide.
That flow figure is a useful starting point, but it does not mean the heater will maintain the same temperature with every combination of fixtures. Hot-water output depends on the incoming water temperature and the temperature rise the heater needs to produce. For condo shoppers, check the expected demand carefully—especially if you want to run a shower and another hot-water fixture together.
The listed installation requirements include a 240V single-phase supply, one 40A double-pole breaker, #8 AWG copper conductors with ground, and a recommended minimum 100A household service panel. Confirm those details with a qualified electrician and your building before purchasing. Rheem lists a five-year leak warranty and a one-year parts warranty.
Pros:
- Compact unit that frees up floor space
- Digital temperature control in one-degree increments
- Listed flow capacity of up to 1.95 GPM
- Warranty information is provided in the product details
Cons:
- Lower stated flow capacity than the 14kW and 18kW models
- Requires 240V power and a suitable electrical panel
Verdict: The Rheem is worth considering for a smaller hot-water load if its listed flow and electrical needs match your condo; it is not the strongest choice for several high-demand fixtures running together.
4. Westinghouse 14kW: A Smart-Home Pick for Two Points of Use
This 240V, 14kW Westinghouse model sits between the lower-capacity Rheem and the higher-power NOVIEEX. It has a compact wall-mount design, WiFi connectivity, and compatibility with Alexa and Google Home, according to the listing. Its controls include a temperature setting from 86°F to 140°F and a memory feature that restores the last setting after a power outage.
The listing states a maximum of 3.4 GPM when incoming water is 62°F and the outlet is set to 105°F, and describes the heater as suitable for two points of use. Those conditions matter: colder incoming water or a higher target temperature can reduce available flow. The stated minimum startup flow is 0.53 GPM, so confirm that your expected fixture flow will reliably activate the heater.
Installation requires a dedicated 60A double-pole breaker and 6 AWG wire at 240V, along with 1/2-inch NPT connections. The unit is listed as ETL certified and has an IPX4 rating. Smart controls may be convenient, but they do not offset the need to verify panel capacity and obtain any required condo approvals.
Pros:
- Stated capacity for two points of use
- WiFi app control and compatibility with Alexa and Google Home
- Compact wall-mounted design
- Temperature memory and listed safety protections
Cons:
- Requires a dedicated 60A double-pole breaker and 6 AWG wire
- Maximum flow is specified for particular inlet and outlet temperatures
Verdict: This is a practical middle-capacity option if you want smart controls and your condo’s electrical service can meet its dedicated circuit requirements.
5. Jflapil 110V 3000W: An Under-Sink Heater for Light Use
Like the xwdzswgs unit, the Jflapil is a 110V, 3000W point-of-use heater designed for compact spaces. It has a wall-mounted format, an LED display, and a stated temperature range of about 82°F at 0.3 GPM to 131°F at 0.5 GPM. The listing gives 1/2-inch NPT connections and describes the unit as ETL certified.
This is a better fit for a nearby sink than for a condo-wide hot-water system. The product information specifically says it is not for shower use and notes that a shower needs at least 1.8 GPM. Its smaller power rating and listed flow range make that limitation central to the buying decision, rather than a minor detail.
The listing calls for vertical installation and says to use wire of at least 2.5 mm² with a 32A-or-higher circuit breaker. Because electrical requirements must match the heater and local code, ask a qualified electrician to verify the correct circuit and wiring before installation. The product listing also states a 24-month warranty.
Pros:
- Small wall-mounted design for a limited installation area
- Temperature display with Fahrenheit and Celsius settings
- Listed safety protections, including dry-burn and overheating protection
- Product details state a 24-month warranty
Cons:
- Not designed for shower flow or whole-condo use
- Requires vertical installation and careful circuit verification
Verdict: Pick the Jflapil only for a low-flow sink application where its installation requirements are suitable; for showers or multiple fixtures, choose a higher-capacity heater.
How to Choose a Tankless Water Heater for a Condo
Decide whether you need a point-of-use or whole-unit heater
A small 110V heater may work for one sink, but the two 3000W options here are not listed for showers. A 240V model is a more relevant starting point if you need to supply a shower or several fixtures. Be clear about whether you are replacing the condo’s main water heater or adding hot water at a single faucet; these are different jobs with different capacity needs.
Match flow rate to the fixtures you use at the same time
Estimate the combined flow of the fixtures that may run together, such as a shower and kitchen faucet. Then compare that demand with the heater’s stated flow rate at a similar inlet and outlet temperature. A maximum GPM figure is not a promise of that flow in all conditions: a larger temperature rise can leave less hot-water flow available.
Check your electrical service before choosing a model
Electric tankless heaters can require dedicated circuits, heavy-gauge wiring, and substantial panel capacity. The listed requirements vary widely in this group, from 110V point-of-use models to 240V units requiring one or more double-pole breakers. Ask a qualified electrician to assess your panel, wiring, and the heater’s installation instructions before ordering.
Confirm condo rules and local code requirements
Condo associations, building managers, and local authorities may have rules for plumbing changes, electrical work, equipment placement, or contractor approval. Check these before buying. A compact wall-mounted heater can save floor space, but it still needs an approved location and a safe, code-compliant installation.
Consider incoming water temperature and your target setting
The heater must raise incoming water to your desired temperature. The colder the inlet water or the higher the temperature you request, the more heating work is required. This is one reason a heater’s advertised maximum flow may differ from the flow you can expect in your home. Use the manufacturer’s sizing information and have a professional check the conditions at your condo.
Review connections, mounting, and safety details
Check the water connection size, mounting orientation, minimum startup flow, and any required clearance or circuit protection. For example, the two small 110V products listed here specify vertical installation, while the Westinghouse model lists 1/2-inch NPT connections and a minimum startup flow. Do not assume that a unit will fit your existing plumbing or wiring without checking first.
Frequently Asked Questions
Can a 110V tankless water heater supply a condo shower?
The two 110V, 3000W products in this guide are described as unsuitable for showers. They are intended for low-flow, point-of-use applications such as a sink. Check the product specifications and do not treat a small under-sink heater as a replacement for a higher-capacity shower supply.
Is an 18kW electric tankless heater enough for a condo?
It may suit some smaller homes or condos, but there is no one-size-fits-all answer. Flow depends on simultaneous fixture use and the temperature rise required. The NOVIEEX listing gives a maximum flow figure, but its electrical requirements are substantial, so confirm both sizing and panel capacity with qualified professionals.
Can a tankless heater run a shower and sink at the same time?
That depends on the combined fixture flow, incoming water temperature, desired hot-water temperature, and the heater’s capacity. The Westinghouse and NOVIEEX listings describe support for multiple points or needs, but those claims should be compared with your actual demand and local conditions.
Do electric tankless water heaters need a dedicated circuit?
Many do. The products in this guide list different electrical requirements, including dedicated 240V circuits for the larger models. Follow the exact installation instructions and have an electrician verify the breaker, wire size, and service-panel capacity.
Are tankless water heaters suitable for condos?
They can be, especially where saving floor space is useful, but installation depends on electrical capacity, plumbing layout, building rules, and local code. Verify those factors before selecting a model.
Which option is best for a single kitchen or bathroom sink?
The xwdzswgs and Jflapil 110V, 3000W models are the point-of-use choices in this group. Both are described as compact sink heaters, and neither is intended for shower use. Compare their installation instructions and have the circuit checked before choosing.
Final Recommendation
For a condo that needs hot water at more than one fixture, the Westinghouse 14kW is a balanced option to investigate, while the NOVIEEX 18kW offers a higher stated capacity if your electrical service can support it. The Rheem 8kW may fit a lower-flow setup. For one sink only, consider one of the 110V point-of-use models. In every case, confirm flow needs, electrical requirements, and condo approval before purchase or installation.
