Product reviewHeating & Cooling

Best Auxiliary Hot Water Heater: 4 Compact Tank Models Compared

Updated 10 min read

Reader-supported: when you buy through links on our site, we may earn an affiliate commission at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases. Learn more.

An auxiliary hot water heater can shorten the wait for warm water at a distant sink, add a nearby hot-water source in an RV or food truck, or support a larger system. The products below are compact electric storage-tank units, not tankless heaters: they store a small amount of heated water and reheat it as needed. Compare capacity, outlet and circuit needs, plumbing connections, and installation space before choosing one.

Quick Comparison

ProductCapacityPower and controlsStandout detail
BISELONG 8-Gallon Under-Sink Water Heater8 gallons110/120V; listing details say 1440W and require a 20-amp circuitLarger storage capacity; multiple mounting options
Ganggend 2.5-Gallon Mini-Tank Water Heater2.5 gallons110V, 1500W; digital temperature displayCompact size and adjustable temperature
ThermoMate 2.5-Gallon Point-of-Use Heater2.5 gallons120V, 1.44 kW; plug-in connectionUL-certified unit with a freeze mode
ERFEI 2.5-Gallon Mini-Tank Heater2.5 gallons110V, 1500W; LED temperature displayStainless steel inner tank
USATON 2.5-Gallon Mini-Tank Heater2.5 gallons110V; rotary temperature control and LED displaySupplied fittings and a listed three-year warranty

Our Picks: Best Auxiliary Hot Water Heater reviews

BISELONG 8-Gallon Heater: Best for More Stored Hot Water

With an 8-gallon tank, the BISELONG holds more water than the four 2.5-gallon options here. That makes it worth considering when a small point-of-use tank may run short during repeated sink use. Its stated temperature range is 86–167°F, and the product description lists wall, rack, and floor placement.

The tank is described as stainless steel with an enamel coating, and the heater has a 316 stainless steel element. The listing also describes temperature control and multiple safety features. Its larger capacity takes more room than a 2.5-gallon unit, so measure the installation area and plan for access to plumbing connections and the relief valve.

Check the electrical details carefully before buying: the title says 1500W, while the description specifies 1440W and calls for a 20-amp circuit breaker. The listing also gives a maximum pressure of 109 PSI and describes the water connections as 1/2-inch NPT to 3/8-inch. Confirm those specifications against the product label and your plumbing setup before installation. The pressure relief valve must be installed at the blue water-inlet end, according to the supplied instructions.

Pros:

  • 8-gallon capacity is larger than the other picks in this guide.
  • Offers wall, rack, or floor placement.
  • Adjustable temperature range from 86°F to 167°F.
  • Described with a stainless steel tank and enamel coating.

Cons:

  • Electrical wattage differs between the title and description.
  • Requires careful checking of circuit, pressure, and connection requirements.

Verdict: Choose the BISELONG if you want more stored hot water and can meet its installation requirements; verify the electrical specifications before purchasing.

Ganggend 2.5-Gallon Heater: Best for a Digital Temperature Display

This Ganggend mini-tank is designed for point-of-use hot water in a kitchen, bathroom, laundry area, or RV. Its 2.5-gallon capacity keeps the unit compact, and the listing gives dimensions of 11.4 by 11.4 by 10.4 inches. It can be wall-mounted or placed under a sink or counter.

A digital screen shows temperature, with manual adjustment from 86°F to 149°F. The product description lists a 1500W, 110V heating element and claims heating can take as little as six minutes. Actual results can vary with conditions, so treat that time as a listed claim rather than a guarantee. The tank has insulation foam and a reinforced inner tank; the listing also describes a pressure relief valve and a maximum pressure of 150 PSI.

This model may suit someone who values a visible temperature readout in a small package. Its listed power cord is about 28–31 inches long, so check that it can reach the intended outlet without an unsafe extension. The supplied product data marks the listing unavailable, so check the Amazon page for current availability before planning a purchase.

Pros:

  • Digital display and adjustable temperature control.
  • Compact listed dimensions for cabinet or under-sink placement.
  • Wall-mounting or countertop-cabinet placement options.
  • Insulation foam and a described pressure relief valve.

Cons:

  • The listed cord is relatively short, so outlet placement matters.
  • Availability may change; confirm the listing before purchase.

Verdict: Consider the Ganggend if a digital temperature display is a priority and its dimensions, cord length, and current availability work for your setup.

ThermoMate 2.5-Gallon Heater: Best for Documented Certifications

The ThermoMate is a compact 2.5-gallon point-of-use heater for an under-sink or counter installation. It can be wall- or floor-mounted and is designed to plug into a standard 120V outlet. The listed dimensions are 12.95 inches wide and high by 11.5 inches deep, which are larger than the Ganggend’s stated dimensions, so compare measurements with your available cabinet space.

Its thermostat has three settings across a stated range of 50°F to 149°F, plus a freeze mode. The manufacturer describes an enamel-coated, glass-lined tank and a 316 stainless steel heating element. The supplied details also identify the unit as UL certified and state that it includes a CSA-made temperature-and-pressure relief valve. Its listed electrical draw is 1.44 kW at 120 volts, with a 12-amp nominal current.

Compared with the display-equipped Ganggend and ERFEI models, the ThermoMate uses three temperature settings rather than a digital screen. That simpler control may be enough for a basic sink setup, while its listed certifications are useful details to verify when comparing options. It has a two-foot power cord, so confirm outlet access and follow the installation instructions.

Pros:

  • UL-certified, according to the supplied product information.
  • Includes a CSA-made T&P relief valve, as listed.
  • Offers a freeze mode and three temperature settings.
  • Plugs into a standard 120V outlet.

Cons:

  • Uses preset temperature levels rather than a digital display.
  • The listed two-foot cord may limit outlet placement.

Verdict: The ThermoMate is a sensible option if you want a compact plug-in tank with documented certification details and can work with its simpler thermostat.

ERFEI 2.5-Gallon Heater: Best for a Stainless Steel Inner Tank

The ERFEI is a 2.5-gallon mini-tank intended to keep hot water close to a sink or other point of use. Its compact format is aimed at spaces such as RVs, kitchens, garages, and food trucks. The listing describes a 1500W heater that operates from a standard 110V outlet and has an LED display for viewing and adjusting the temperature.

Unlike the ThermoMate’s three-level thermostat, this model is described as having a digital display and button-based temperature adjustment. Its inner tank is listed as thickened stainless steel, and the product information mentions a pressure relief valve. Those features may appeal if you want a readout and a stainless steel tank, but the supplied details do not state a maximum water pressure or exact dimensions.

The listing describes installation as a straightforward connection to standard water lines and a 110V outlet. Still, a water heater needs correct plumbing, electrical protection, and pressure relief. Check the included instructions and confirm the connections and clearances with your setup rather than assuming every cabinet or outlet will be suitable.

Pros:

  • LED display with adjustable temperature control.
  • 1500W rating and 110V operation, as listed.
  • Thickened stainless steel inner tank.
  • Designed for compact under-sink or storage-space installation.

Cons:

  • The supplied details do not list dimensions or a maximum water pressure.
  • Confirm connection sizes and installation requirements before ordering.

Verdict: Choose the ERFEI if a digital display and stainless steel inner tank are your priorities, but confirm the missing fit and pressure specifications for your installation.

USATON 2.5-Gallon Heater: Best for Included Plumbing Fittings

The USATON is another 2.5-gallon storage heater for under-sink, RV, camping, or small commercial use. Its listed dimensions are 13.4 inches wide by 13.4 inches high by 12.88 inches deep. The listing notes that thicker PUF insulation contributes to its larger size, so measure carefully if cabinet space is tight.

Temperature adjustment uses a rotary knob, while an LED display shows the water temperature. The stated range is 65°F to 161°F. The product description lists a glass-enamel-lined tank, a T&P relief valve, and a three-year warranty. It also includes a T&P valve, a 1/2-inch NPT three-way tee, two 24-inch 1/2-inch NPT hoses, and a drain pipe. Confirm that these fittings match your plumbing before relying on them for installation.

For a buyer comparing small tanks, the included fittings and listed warranty are useful points of distinction. The trade-off is a larger footprint than some compact units, and the listing’s “plug-and-play” wording should not replace a check of the electrical load, local requirements, and installation instructions.

Pros:

  • Includes several plumbing fittings, including hoses and a T&P valve.
  • LED temperature display and rotary control.
  • Listed temperature range from 65°F to 161°F.
  • Product description states a three-year warranty.

Cons:

  • Larger listed dimensions may not fit every under-sink cabinet.
  • Confirm the supplied fittings match your plumbing connections.

Verdict: The USATON is a good fit if its included fittings and listed warranty suit your needs and you have room for its larger cabinet footprint.

How to Choose an Auxiliary Hot Water Heater

Choose the Right Tank Capacity

The BISELONG holds 8 gallons, while the other models in this guide hold 2.5 gallons. A larger tank stores more heated water, but it also takes up more space. A small point-of-use tank can be a better match for one sink or a compact RV installation. Think about how often the hot-water tap will be used and whether you need a larger reserve or a smaller footprint.

Check the Electrical Requirements

Do not assume every 110V or 120V heater has the same electrical needs. Compare the wattage, current, plug, cord length, and circuit requirements. The BISELONG description specifies a 20-amp circuit, while the ThermoMate lists 1.44 kW at 120 volts and a 12-amp nominal current. Confirm the heater’s label and installation instructions, and consult a qualified electrician if you are unsure whether your circuit is suitable.

Measure the Space and Plan Access

Measure the cabinet or installation area before choosing a model. Allow room for the tank, water connections, power cord, and access for future service. The Ganggend and USATON list specific dimensions, while the ThermoMate also provides measurements. For models without full dimensions in the supplied details, check the product listing or ask the manufacturer before ordering.

Match Plumbing Connections and Pressure Limits

Compare the heater’s inlet and outlet sizes with your existing plumbing. Check the listed maximum water pressure where one is provided, and make sure the correct pressure relief valve is installed as directed. The BISELONG description calls out a specific inlet orientation for its relief valve. Never leave out a required relief valve or treat a stated maximum pressure as a suggested operating target.

Compare Temperature Controls and Tank Materials

Some models use a digital temperature display, while the ThermoMate has three thermostat settings. Choose the control style that is easiest for you to use, and consider the stated temperature range. Tank descriptions also differ: the listings mention stainless steel, enamel, or glass-enamel linings. Treat these as product specifications, not a guarantee against wear; follow the care and maintenance instructions for the model you choose.

Understand the Installation and Warranty Details

A plug-in heater may still need correct plumbing work, a suitable outlet, and safe mounting. Read the complete installation instructions before buying, and use a licensed professional when the work or local rules call for one. Compare what fittings are included and review the warranty terms directly with the manufacturer, since the supplied fittings and warranty coverage vary by product.

Frequently Asked Questions

What is an auxiliary hot water heater?

In this guide, it means a compact electric storage-tank heater placed near a fixture or in a small space. It can provide a nearby source of hot water, but it does not replace the need to size and install the main plumbing system correctly.

Are these heaters tankless?

No. The five models here are mini-tank or storage-tank heaters. They store a stated amount of water and heat it in the tank; the word “instant” in some product titles does not mean they are tankless.

Is a 2.5-gallon heater enough for a sink?

It may suit a single point of use, but whether it is enough depends on how much hot water you use and how often. A smaller tank holds less water than the 8-gallon BISELONG, so consider your usage pattern rather than relying on capacity alone.

Can I plug one of these heaters into any outlet?

No. Check the specific voltage, wattage, current, plug, circuit, and installation instructions for your model. The BISELONG description, for example, calls for a 20-amp circuit. Have an electrician check the circuit if you are uncertain.

Do I need a pressure relief valve?

Follow the heater’s installation instructions and local plumbing requirements. Several product descriptions specify a pressure relief valve, and the BISELONG instructions identify which end it must be installed on. Do not operate a heater without required safety components.

Which model is easiest to compare for available space?

The Ganggend, ThermoMate, and USATON listings provide dimensions in the supplied product details. Measure your space and allow room for connections and service access. For the BISELONG and ERFEI, confirm the full dimensions from the current listing or manufacturer before purchasing.

Final Recommendation

The BISELONG stands out for its 8-gallon capacity, but its circuit and connection details deserve a close check before purchase. For a smaller point-of-use tank, the ThermoMate offers documented UL certification and a freeze mode, while the ERFEI and Ganggend provide digital displays. The USATON may appeal if its included fittings and stated warranty match your needs. The best choice is the one that fits your hot-water use, available space, electrical circuit, and plumbing requirements.

Rate this post
Spread the love

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top