If you’re looking for the biggest tankless water heater, compare hot-water flow—not the size of the unit. The Rinnai RX199iN leads this group with a stated output of up to 11.1 gallons per minute, while the right choice for your home still depends on your incoming water temperature, fuel supply, and how many fixtures you use at once. Here’s how these five options compare and what to check before choosing one.
Table of Contents
Quick Comparison
| Product | Type | Stated capacity | Best suited for |
|---|---|---|---|
| Rheem 18kW Electric Tankless Water Heater | Electric | Up to 4.4 GPM | Smaller hot-water demands where electrical service is suitable |
| Rheem RTG Series 7.0 GPM Natural Gas Tankless Water Heater | Natural gas | 7.0 GPM at a 35°F temperature rise | Homes needing several hot-water fixtures at once |
| Rinnai RX199iN Condensing Smart Sense Tankless Water Heater | Natural gas or propane | Up to 11.1 GPM | Large homes with high simultaneous hot-water demand |
| VEVOR Propane Tankless Water Heater | Propane | GPM not stated in the supplied product details | Shoppers considering an outdoor propane unit with remote controls |
| Stiebel Eltron Tempra 29 Plus Electric Tankless Water Heater | Electric | 28.8 kW at 240 volts; GPM not stated | Homes with substantial electrical capacity and no gas connection |
Our Picks: Best Biggest Tankless Water Heater reviews
1. Rinnai RX199iN: Biggest stated flow for a large home
The Rinnai RX199iN is the high-capacity pick in this lineup. Its stated maximum flow is 11.1 GPM, and the product details say it can serve up to seven fixtures at once. That makes it the strongest match here for a large home where multiple showers or other hot-water uses may overlap. Actual output depends on your installation and incoming water conditions, so treat the maximum as a sizing reference rather than a guarantee for every setup.
This condensing model supports natural gas or propane through its Smart Sense gas control system. It is designed for indoor or outdoor installation, though the product details specify that an RX-OVC vent cap is required for an outdoor install. The compact, suitcase-size design can save space, and the Quick Flush feature is intended to make flushing simpler.
The listed UEF is .98. Wi-Fi control is not built in as described: the product information points to a separate Controlr module for that feature. Professional installation is recommended, and the warranty details include conditions such as product registration within 90 days for the stated labor coverage. Those details make it especially important to confirm the installation plan and warranty terms before buying.
Pros:
- Highest stated flow in this comparison, at up to 11.1 GPM
- Supports either natural gas or propane
- Can be installed indoors or outdoors with the specified vent cap
- Compact design with a Quick Flush feature
Cons:
- Professional installation is recommended
- Wi-Fi control requires an additional module
Verdict: Choose the Rinnai RX199iN if your priority is the highest stated flow here and your home has the right gas supply and installation conditions.
2. Rheem RTG Series: A whole-home gas option with a stated 7.0 GPM output
This indoor Rheem natural-gas model is described as a whole-home unit for residential use. It produces a stated 7.0 GPM at a 35°F temperature rise, with a 160,000 BTU-per-hour output. Rheem positions it for two to three simultaneous showers, making it a practical middle ground between the smaller electric models here and the higher-flow Rinnai.
The unit uses a direct-vent system and has a wall-mount design. Its digital LED control panel allows temperature adjustments in 1°F steps, while built-in protections include freeze and flame-failure protection. The product details also list LeakGuard leak detection and prevention. These features add useful safeguards, but they do not replace correct installation and maintenance.
The listed UEF is 0.82, and the product information claims energy savings of up to 34% compared with 50-gallon electric tank heaters. That figure is a product claim, not a guaranteed result for every household; actual energy use depends on the home and how hot water is used. Compared with the Rinnai, this Rheem has a lower stated flow, but it may be a more fitting size if your demand does not call for the highest capacity in the group.
Pros:
- Stated 7.0 GPM output at a 35°F temperature rise
- Designed for whole-home use and two to three simultaneous showers
- Digital temperature control with 1°F adjustments
- Includes listed freeze, flame-failure, and leak protections
Cons:
- Requires natural gas and an indoor direct-vent installation
- Its stated flow is lower than the Rinnai RX199iN
Verdict: Consider this Rheem if you need a natural-gas whole-home heater but do not need the highest stated flow in this comparison.
3. Stiebel Eltron Tempra 29 Plus: High-output electric heating with demanding service needs
The Tempra 29 Plus is the most powerful electric option in this group by its stated electrical rating: 28.8 kW at 240 volts. It heats water on demand, needs no venting, and includes two temperature memory presets. Those features make it worth considering if you want electric operation and your home’s electrical service can support the unit.
That electrical requirement is a major part of the buying decision. The product details call for three dedicated 40-amp breakers, 8-gauge copper wiring, and at least 200-amp total service to the residence. Its maximum draw is stated as 28,800 watts at 240 volts or 21,600 watts at 208 volts. Have a qualified professional confirm your panel and wiring can handle those requirements before you choose it.
The supplied information does not state a GPM figure, so it is not possible to compare its hot-water flow directly with the gas models above. In particular, a high kilowatt rating alone does not tell you how many fixtures it can serve at once in your home. Compared with the Rheem 18kW electric model, this Stiebel has a higher stated power rating, but also requires a more substantial electrical setup.
Pros:
- High stated electrical output of 28.8 kW at 240 volts
- No venting required
- Two temperature memory presets
- Provides on-demand hot water without a storage tank
Cons:
- Requires three dedicated 40-amp breakers and at least 200-amp home service
- The supplied product details do not state a GPM capacity
Verdict: Pick the Tempra 29 Plus only if you prefer electric heating and an electrician confirms that your home meets its demanding service requirements.
4. Rheem 18kW: A compact electric choice for more modest demand
This Rheem is an 18 kW electric tankless heater rated for up to 4.4 GPM. Its external digital thermostat has an LED display and stated temperature accuracy of plus or minus 1 degree. Rheem’s self-modulation feature adjusts power to meet hot-water demand, while two copper immersion heating elements are described as field-serviceable.
The unit has bottom 3/4-inch NPT water connections and a threaded design intended to make replacement and installation simpler. It is a more modest-capacity option than the two gas models in this comparison, so it is better suited to a household whose hot-water needs fit its stated flow than to shoppers seeking the biggest whole-home output available.
As with any electric tankless heater, confirm electrical requirements and expected flow with a qualified installer before purchase. The supplied product details do not give the breaker or service requirements, so do not assume they match the Stiebel model—or that your current setup is suitable. This Rheem has a clearly stated GPM figure, which makes it easier to compare than the Tempra, but its 4.4 GPM maximum is the lowest stated flow among the models with a GPM rating in this group.
Pros:
- Stated flow of up to 4.4 GPM
- Digital temperature display with stated 1-degree accuracy
- Self-modulating power adjusts to hot-water demand
- Field-serviceable copper heating elements
Cons:
- Lower stated flow than the gas models in this comparison
- Electrical service requirements are not specified in the supplied details
Verdict: Choose this Rheem if you want a straightforward electric unit and its 4.4 GPM stated maximum fits your household’s needs.
5. VEVOR Propane Tankless Heater: Outdoor propane setup with wired controls
This VEVOR is a propane-powered tankless heater with a wired control panel listed at 32.8 feet. The control panel supports temperature adjustment, on/off control, and unit switching. The product details also describe temperature control within plus or minus 1°F and list protections for issues such as flameout, overheating, dry burning, and freezing.
The supplied specifications have an important inconsistency: the product title says 100,000 BTU, while the description says 120,000 BTU per hour. The details also use “5.3Gal” but do not provide a GPM figure. Since flow rate is essential when comparing tankless heaters, confirm the current product specifications and sizing guidance before relying on this model for a particular number of showers or fixtures.
The product is described as an outdoor unit with a vent outlet and standard 3/4-inch NPT connector. That may suit shoppers planning a propane installation where an outdoor unit is appropriate, but it is not the clearest choice for someone shopping by whole-home flow capacity. Compared with the Rinnai and Rheem gas models, the VEVOR listing provides less consistent information for judging simultaneous-use capacity.
Pros:
- Propane-powered design with a wired control panel
- Temperature control stated as accurate within plus or minus 1°F
- Lists several safety protections, including freeze and overheating protection
- Uses a standard 3/4-inch NPT connector
Cons:
- Supplied details conflict on the BTU rating
- No GPM figure is provided for comparing hot-water flow
Verdict: Consider the VEVOR only after verifying its capacity and BTU specifications, especially if you need dependable whole-home sizing information.
How to Choose the Biggest Tankless Water Heater
Size by flow rate and simultaneous use
For a tankless heater, “biggest” usually means the unit can deliver enough hot water for your peak demand—not that it holds the most water. Make a realistic list of the fixtures you may use at the same time, such as showers, sinks, and appliances that need hot water. Compare that demand with the heater’s stated flow rate and the conditions used to measure it. For example, the Rheem RTG’s 7.0 GPM figure is specified at a 35°F temperature rise, while other product details may use different conditions or provide no GPM figure at all.
Account for incoming water temperature
A heater must raise incoming water to your chosen output temperature. Colder incoming water requires a larger temperature increase, which can reduce the flow the unit can deliver. Check local groundwater conditions and use the manufacturer’s sizing information for your area. Do not assume that a maximum GPM figure will be available in every climate or installation.
Match the fuel type to your home
The products here use electricity, natural gas, or propane. A natural-gas or propane unit needs a suitable fuel supply and venting or installation arrangement. An electric unit avoids gas venting, but it still needs enough electrical capacity. Choose a fuel type your home can support, and include the cost and work of any needed upgrades in your decision.
Confirm electrical service before choosing an electric model
Electric tankless heaters can draw substantial power. The Stiebel Eltron Tempra 29 Plus, for example, specifies three dedicated 40-amp breakers, 8-gauge copper wiring, and at least 200-amp total service to the residence. The supplied details for the Rheem 18kW do not list its breaker or service requirements, so ask the manufacturer or a qualified electrician to confirm those details for your installation.
Check venting and installation location
Installation requirements can affect both the project cost and where the unit can go. The Rheem RTG is described as an indoor unit with a direct-vent system. The Rinnai supports indoor or outdoor installation, but its product details call for a specific vent cap for outdoor use. The VEVOR is described as an outdoor unit. Check the exact manual and local requirements before planning a location.
Compare stated capacity carefully
Use the product’s GPM rating and the conditions attached to it as your main comparison points. A BTU rating or kilowatt rating alone does not tell you how many fixtures the unit can serve at once. If the listing does not state a flow rate—or if its specifications conflict, as with the VEVOR’s supplied BTU figures—get clarification before buying. Rely on the manufacturer’s sizing guidance rather than treating a headline maximum as a promise for every home.
Consider controls, maintenance, and warranty terms
Look at how temperature is set and what maintenance the unit may need. The models in this comparison offer features such as digital controls, temperature presets, self-modulation, or a Quick Flush feature. These can make operation or upkeep more convenient, but they do not remove the need to follow the manual. Read warranty conditions closely, including any registration deadlines, and confirm who will install and service the unit.
Frequently Asked Questions
Which product in this comparison has the highest stated flow?
The Rinnai RX199iN has the highest stated maximum flow, at up to 11.1 GPM. Its product details say it can serve up to seven fixtures at once, but actual output depends on the installation and incoming water conditions.
Is a higher GPM rating always better?
Not necessarily. A higher flow rating can help with greater simultaneous demand, but you still need to match the heater to your home’s incoming water temperature, fuel supply, and typical fixture use. An oversized unit may add cost without providing a useful benefit for your household.
What is the largest electric model in this group?
The Stiebel Eltron Tempra 29 Plus has the highest stated electrical rating here, at 28.8 kW at 240 volts. Its product details also specify substantial electrical requirements, including three dedicated 40-amp breakers and at least 200-amp total service to the residence.
Can a tankless water heater supply several showers at once?
It can, if its flow capacity and temperature rise suit the demand. Rheem describes its 7.0 GPM RTG model as suitable for two to three simultaneous showers. The Rinnai lists a higher maximum flow, but you should use the manufacturer’s sizing guidance for your home rather than relying only on a general fixture count.
Can the Rinnai RX199iN use propane?
Yes. Its product details say the Smart Sense gas control system supports natural gas or propane. Confirm the setup requirements with the manufacturer and installer before purchase.
Why does temperature rise matter when sizing a unit?
Temperature rise is the difference between the incoming water temperature and the temperature you want at the tap. The colder the incoming water, the more the heater must raise its temperature, which can affect the flow rate it can provide. That is why a GPM rating should be considered together with its stated temperature-rise conditions.
Should I install a tankless water heater myself?
Installation can involve gas or electrical work, venting, plumbing, and local code requirements. Rinnai recommends professional installation, and the Stiebel’s electrical requirements show why expert checks matter for high-power models. Use a qualified installer who can confirm the unit is suitable for your home.
Final Recommendation
For shoppers who want the biggest stated flow in this group, the Rinnai RX199iN is the strongest match, with up to 11.1 GPM and support for natural gas or propane. The Rheem RTG is a sensible alternative for homes whose needs fit its stated 7.0 GPM output. If you prefer electric, compare the Rheem 18kW’s 4.4 GPM figure with the Tempra 29 Plus’s much higher electrical demand, and verify your service before choosing either one. In every case, size the heater for your local water temperature and actual peak use, then confirm the installation requirements with a qualified professional.