Product reviewHeating & Cooling

Best Chimney Vent Water Heater Kits Compared: Picks, Pros and Cons

Updated 10 min read

Reader-supported: when you buy through links on our site, we may earn an affiliate commission at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases. Learn more.

Choosing the right vent is a safety and fit decision, not just a matter of finding a pipe that looks compatible. The options below are vent kits or parts for indoor gas tankless water heaters, and most are designed for horizontal exhaust—not necessarily for a traditional vertical chimney. Before buying, check your water heater’s manual for the approved vent type, diameter, materials, and installation limits.

Quick Comparison

ProductWhat’s includedMaterialBest suited for
Blulu Stainless Steel Direct Vent Pipe KitElbow and 19.7-inch pipe201 stainless steelA basic 3-inch vent connection
FOGATTI Stainless Steel Vent Pipe KitElbow and horizontal termination pipeT304 stainless steelA simple horizontal vent setup
MIZUDO 3-Inch Vent Pipe KitElbow and chimney rain cap304 stainless steelA setup where a rain-cover design is needed
CAMPLUX 3-Inch Horizontal Z-Vent KitPipes, wall thimble, termination hood, elbow, and manualStainless steelA more complete through-wall installation
GASLAND 3-Inch Stainless Steel Vent KitTermination hood, elbow, two pipe lengths, wall thimble, and clampsT304 stainless steelA kit with several vent sections and fittings

Our Picks: Best Chimney Vent Water Heater reviews

Blulu Direct Vent Pipe Kit: A Simple 3-Inch Pipe-and-Elbow Set

The Blulu kit includes a 3-inch elbow and a straight pipe measuring 19.7 inches long. It is a small, focused package rather than a full installation kit, so it may suit a setup where you already have the other required vent components.

The pipe is made from 201 stainless steel, which the product description identifies as heat resistant and wear resistant. Its crimped end is intended to help connect with compatible ductwork. Check the actual outside diameter and your heater’s vent requirements before ordering; a nominally similar size is not enough to confirm a safe fit.

Compared with the CAMPLUX and GASLAND kits, Blulu includes fewer parts, which can mean fewer extras if you only need a pipe and elbow. It does not list a termination hood or wall thimble in the package, so it is not the most complete choice for a new through-wall installation.

Pros:

  • Includes both a straight pipe and elbow.
  • Lists a 3-inch outside diameter and 19.7-inch pipe length.
  • Crimped end is designed for straightforward connection to compatible ductwork.
  • Compact option when you need only these parts.

Cons:

  • 201 stainless steel rather than the T304 material specified for some competing kits.
  • Does not list a termination hood or wall thimble among the included parts.

Verdict: Choose the Blulu kit if your heater accepts its exact 3-inch dimensions and you need a basic pipe-and-elbow set, not a complete vent assembly.

FOGATTI Vent Pipe Kit: T304 Steel for a Basic Horizontal Run

This FOGATTI set includes an elbow and a horizontal termination pipe for gas tankless water heaters. Its parts are made from T304 stainless steel, which the product description highlights for corrosion resistance and heat tolerance.

The stated assembly is simple: connect the elbow to the termination pipe, then attach the elbow to the heater’s exhaust outlet. That description does not replace the manufacturer’s installation instructions. Confirm the vent diameter, permitted vent route, and required clearances for your specific appliance before using the kit.

FOGATTI is a more focused package than the CAMPLUX or GASLAND kits, which list a wall thimble and additional pipe sections. That can be useful if you already have compatible wall components, but it leaves more planning to you if you are assembling a full through-wall setup from scratch.

Pros:

  • Uses T304 stainless steel, according to the product details.
  • Includes an elbow and horizontal termination pipe.
  • Designed to exhaust combustion gases from residential tankless water heaters.
  • Can be combined with other vent pipes when diameters match.

Cons:

  • The supplied description does not specify the pipe length or list a wall thimble.
  • Compatibility still depends on the exact heater model and vent specifications.

Verdict: The FOGATTI kit is a reasonable option when you need a basic horizontal termination set in T304 stainless steel and already know it matches your appliance.

MIZUDO 3-Inch Kit: Elbow and Rain-Cap Design

The MIZUDO kit is described as a 3-inch outside-diameter vent set with an elbow and chimney rain cap. Its 304 stainless steel construction is intended for use with indoor gas water heaters. The cap has a closed top and surrounding mesh cavity, a design intended to keep rain or snow from entering through the vent.

The elbow has a crimped end for connection to compatible sheet metal or fiberglass ductwork. The product description also says it is designed to support smooth exhaust flow. Those details are useful, but the listing does not provide a full parts list or pipe length, so verify exactly what is included before planning an installation.

Unlike the CAMPLUX and GASLAND kits, this option specifically calls out a rain-cover design. It may appeal if that feature is required by your installation plan, but the kit’s stated compatibility should not be treated as universal. Match it to the water heater manual and confirm the vent configuration is approved.

Pros:

  • Includes an elbow and chimney rain cap, according to the product title.
  • Uses 304 stainless steel.
  • Lists a 3-inch outside diameter.
  • Rain-cap design is intended to limit water entry through the vent.

Cons:

  • The product description does not clearly list pipe length or all package contents.
  • Compatibility is described around select indoor gas water heater brands, so check your model carefully.

Verdict: Consider MIZUDO when its rain-cap design and 3-inch size match your heater’s approved vent setup, and confirm the listing’s current package contents before buying.

CAMPLUX Horizontal Z-Vent Kit: A More Complete Through-Wall Package

CAMPLUX lists a broad set of components: two 3-inch vent pipes, a wall thimble, a termination hood with a backflow preventer, a 90-degree elbow, and an installation manual. The detachable pipe sections can be assembled to suit the available space, according to the product description.

The kit is intended for indoor gas tankless water heaters. CAMPLUX names several of its own heater series as compatible and describes the kit as suitable for many gas heaters with a 3-inch vent opening. Do not rely on diameter alone, though. A heater maker may require a specific vent system or installation method.

The adjustable wall thimble is described as extending from 3.9 to 7.8 inches. The termination hood is intended to reduce the risk of rain and debris entering the vent. This parts list makes CAMPLUX more complete than the Blulu and FOGATTI options, but the extra components are only useful if they fit your wall and meet your appliance requirements.

Pros:

  • Includes a wall thimble, termination hood, elbow, and two vent pipes.
  • Detachable pipe sections offer flexibility for different installation spaces.
  • The wall thimble is described as adjustable in depth.
  • Termination hood includes a backflow preventer, according to the product details.

Cons:

  • Its listed compatibility does not confirm approval for every 3-inch gas water heater.
  • The larger set may include parts you do not need for a simple replacement.

Verdict: CAMPLUX is a strong package to compare for a new horizontal through-wall installation, provided your heater manual approves this vent type and its dimensions.

GASLAND 3-Inch Kit: Multiple Pipe Sections and Wall Hardware

The GASLAND kit includes a 3-inch termination hood, a 90-degree elbow, two pipe sections measuring 1 foot and 1.5 feet, a wall thimble, and gear clamps. Its T304 stainless steel construction is described as corrosion and temperature resistant.

GASLAND provides an extensive list of compatible water heater models, including models from its own product lines and several CAMPLUX series. That model list is more helpful than a broad “fits most” claim, but your exact heater model and installation instructions remain the final check. The product description also recommends pairing the kit with other GASLAND venting components for best performance.

Compared with the CAMPLUX set, GASLAND states the lengths of its two pipe sections, which can help you plan the run. However, its compatibility list is long and model-specific; do not assume a similar model name or 3-inch outlet guarantees a match.

Pros:

  • Includes a termination hood, elbow, wall thimble, clamps, and two pipe lengths.
  • Uses T304 stainless steel, according to the product details.
  • Provides a specific list of compatible heater models.
  • Pipe section lengths are stated, helping with layout planning.

Cons:

  • Compatibility is not universal; confirm your exact model is supported.
  • The product description recommends pairing it with other GASLAND components.

Verdict: GASLAND is worth considering if your exact heater appears on its compatibility list and you want a kit with multiple pipe sections and wall hardware.

How to Choose a Chimney Vent for a Water Heater

Confirm the vent type your heater requires

Start with the installation manual for your exact water heater model. The products in this guide are described as horizontal vent kits or parts for indoor gas tankless water heaters. A horizontal through-wall vent is not automatically a substitute for a vertical chimney vent. Use only the vent type and materials approved by the appliance manufacturer.

Match the diameter and connection style

Check the heater’s exhaust outlet size, the vent’s stated diameter, and whether the connection needs an inside or outside fit. For example, Blulu lists a 3-inch outside diameter, while several other products are described as 3-inch kits. Confirm how the dimensions are measured and whether the ends and fittings connect as required.

Choose a kit with the parts your layout needs

Compare the package contents with your installation plan. A pipe and elbow may be enough for a repair or extension when you already have compatible components. A new through-wall installation may also require a termination hood and wall thimble. Do not assume these parts are included unless the listing says so.

Check materials and appliance approval

The products list different stainless steel types, including 201, 304, and T304. Material alone does not prove that a vent is approved for your heater. Check the appliance manual and local requirements for the required vent material, temperature rating, and any matching-system rules.

Plan the vent route and termination point

Measure the route and consider the number of sections, elbows, and wall components needed. The water heater’s instructions may limit vent length, bends, and termination placement. Follow those limits and local building and fuel-gas codes; a kit’s advertised dimensions do not establish that a planned route is safe or compliant.

Consider rain and debris protection

Some kits include a termination hood or rain-cap design intended to reduce water or debris entering the vent. Check whether that design is approved for your appliance and installation. A protective-looking cap should not be added if it conflicts with the heater maker’s vent requirements.

Use qualified help when needed

Gas appliance venting affects safe exhaust removal. If you are unsure about the vent type, clearances, wall opening, or local code, consult a qualified installer. Do not modify a vent system or combine parts unless the appliance instructions allow it.

Frequently Asked Questions

Are these water heaters or vent kits?

They are vent pipes and vent kits for gas tankless water heaters, not water heaters themselves. Their purpose is to connect to an approved appliance vent system and direct exhaust gases as designed.

Can I use a horizontal vent kit with a traditional chimney?

Not automatically. The products listed here are described mainly for horizontal venting through a wall. Check your heater manual to see whether it allows horizontal venting or requires a different chimney or vent configuration.

Will any 3-inch vent kit fit a 3-inch water heater outlet?

No. Diameter is only one part of compatibility. Connection style, vent material, appliance approval, layout, and installation limits also matter. Verify the exact heater model and vent requirements before buying.

What is the difference between the smaller kits and the larger kits?

The Blulu and FOGATTI options list a smaller number of components. CAMPLUX and GASLAND include more parts, such as wall hardware and termination components. A larger package may be more useful for a new installation, while a smaller one may suit a replacement or an existing compatible setup.

Do these kits include everything needed for installation?

Not necessarily. Package contents vary. CAMPLUX and GASLAND list several wall and termination components, while Blulu and FOGATTI describe more limited sets. Check each product’s current listing and compare it with your heater’s required parts.

Which option has a rain-protection feature?

MIZUDO lists a chimney rain cap, while CAMPLUX and GASLAND describe termination hoods. These features are intended to help limit water or debris entry, but the vent design still needs to be approved for your specific appliance.

Final Recommendation

For a more complete horizontal through-wall package, compare the CAMPLUX and GASLAND kits first: both list wall and termination components, while GASLAND also specifies its pipe-section lengths and a model compatibility list. If you only need a basic pipe-and-elbow set, Blulu or FOGATTI may be a closer match. Consider MIZUDO if its rain-cap design meets your needs and its dimensions match your heater. In every case, let the water heater manual and local code—not the product title alone—decide what is safe to install.

Rate this post
Spread the love

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top