Product review

Best Dual TV Wall Mount: Full-Motion Picks Compared

Updated 9 min read

Reader-supported: when you buy through links on our site, we may earn an affiliate commission at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases. Learn more.

If you’re searching for a “dual TV wall mount,” note that the mounts below are designed for one TV each and use dual articulating arms. Those arms let you pull the screen away from the wall, swivel it toward your seat, and adjust its tilt. Before choosing, check your TV’s size, weight, VESA pattern, and wall type against the mount’s specifications.

MountTV size rangeWeight capacityStandout feature
USX MOUNT 37–84-Inch Full Motion Mount37–84 inchesUp to 120 lbPulls out 15.16 inches
IWORKBOARD 32–70-Inch Full Motion Mount32–70 inchesNot specifiedFits several wall types
Perlegear 42–90-Inch UL-Listed Mount42–90 inchesUp to 132 lbWide swivel range
Mounting Dream 32–70-Inch Full Motion Mount32–70 inchesUp to 110 lbExtends up to 17.5 inches
USX MOUNT 42–90-Inch Full Motion Mount42–90 inchesUp to 132 lbRetracts to 2.4 inches

Our Picks: Best Dual Tv Wall Mount reviews

USX MOUNT 37–84-Inch Mount: A Flexible Fit for Many TVs

This USX MOUNT full-motion bracket is a versatile choice for many mid-size and large TVs. It fits screens from 37 to 84 inches, supports up to 120 pounds, and accommodates VESA patterns from 200 × 100 mm to 600 × 400 mm. Check all three measurements before buying, since a TV’s screen size alone does not confirm compatibility.

Its dual articulating arms let you pull the TV up to 15.16 inches from the wall or push it back to 2.74 inches. The mount tilts up 5 degrees or down 15 degrees and swivels up to 45 degrees in either direction. The maximum swivel can depend on the TV and the room layout, so don’t assume every screen will reach the full angle.

The package includes a bubble level, cable ties, and standard mounting hardware. It is designed for wood studs or concrete walls, but the product information says concrete anchors are not included and must be requested separately. It is not a drywall-only installation option.

Pros:

  • Broad 37–84-inch TV compatibility range
  • Supports TVs up to 120 pounds
  • Extends and retracts for flexible viewing and access
  • Includes a bubble level and cable ties

Cons:

  • Concrete anchors are not included in the package
  • Maximum swivel depends on the screen and setup

Verdict: Choose this USX MOUNT if you want a flexible mount for a wide range of TVs and your wall has suitable studs or a properly prepared concrete surface.

IWORKBOARD 32–70-Inch Mount: A Compact Option for Smaller Screens

The IWORKBOARD mount is sized for flat and curved TVs from 32 to 70 inches. It supports VESA patterns from 75 × 75 mm to 400 × 400 mm and is designed for 8-, 12-, or 16-inch wood studs, as well as concrete and brick walls. Its stated weight capacity is not included in the supplied product details, so check the listing and your TV specifications before ordering.

The dual arms extend up to 14.52 inches and retract to 2.56 inches from the wall. You can tilt the screen up 5 degrees or down 12 degrees, swivel it up to 45 degrees in either direction, and make a small leveling adjustment after installation. The thicker-arm design is intended to provide added rigidity, though installation into the correct wall structure remains essential.

The package includes mounting hardware and instructions. The product information notes that a paper drilling template would be helpful, so plan to measure and mark carefully before drilling. Concrete anchors or certain replacement screws may need to be requested from the manufacturer.

Pros:

  • Fits a range of smaller and mid-size TVs
  • Compatible with several stated wall types
  • Retracts close to the wall while still offering extension
  • Allows post-installation leveling

Cons:

  • Weight capacity is not specified in the supplied product details
  • No paper drilling template is mentioned

Verdict: This is worth considering for a compatible 32–70-inch TV when you want a compact profile and can confirm the TV’s weight is within the mount’s listed limit.

Perlegear 42–90-Inch Mount: Heavy-Duty Support for Large TVs

For a larger screen, the Perlegear mount supports TVs from 42 to 90 inches and up to 132 pounds. It fits VESA patterns from 200 × 100 mm to 600 × 400 mm. The mount is UL-listed, and its product description states that it was tested for 60,000 motion cycles and four times its rated load.

The mount swivels up to 50 degrees in either direction, tilts up 5 degrees or down 15 degrees, and has a small post-installation leveling adjustment. Its arms extend up to 16.6 inches and retract to a 3-inch profile. That reach can make it easier to adjust the screen or access connections behind it, while the retracted position keeps the TV closer to the wall.

It is designed for 8-, 12-, or 16-inch wood studs, concrete, or brick—not drywall alone. The package is described as including a bubble level, drilling template, hardware, and anchors for concrete or brick installation. The product information also says an extension bracket may be available if your stud spacing is wider than 16 inches; confirm that option with the manufacturer before relying on it.

Pros:

  • Supports large TVs up to 90 inches and 132 pounds
  • Offers a wider stated swivel range than the other options here
  • Includes a drilling template and concrete or brick anchors
  • UL-listed and specified for motion-cycle and load testing

Cons:

  • Not intended for drywall-only installation
  • Its broad fit range still requires a VESA and wall-type check

Verdict: Pick the Perlegear if your TV is large or heavy and you want a wide swivel range, provided its mounting pattern and wall structure match your setup.

Mounting Dream 32–70-Inch Mount: A Long-Reach Choice

This Mounting Dream bracket is made for TVs from 32 to 70 inches, up to 110 pounds, with VESA patterns up to 400 × 400 mm. It is designed for standard 16-inch wood studs. Unlike the other picks with a dual-arm description, this model’s product information describes a six-arm articulating design.

Its main advantage is reach: the mount extends up to 17.5 inches and retracts to 3.4 inches. The screen tilts up 5 degrees or down 15 degrees to help adjust the viewing angle, and it swivels left or right. A small post-installation adjustment can help level the screen. The listed swivel range is not specified.

The package includes hardware, instructions, a paper template, and a place to store the Allen key. It is not designed for installation on drywall alone. Concrete anchors are available upon request, so check what is included for your wall type before starting the installation.

Pros:

  • Extends up to 17.5 inches from the wall
  • Supports TVs up to 70 inches and 110 pounds
  • Includes a paper installation template
  • Offers tilt and post-installation leveling adjustments

Cons:

  • Designed for standard 16-inch studs
  • Not for drywall-only installation; concrete anchors are available on request

Verdict: Choose this model if you want extra reach for adjusting your screen or accessing its rear connections and your TV fits its size, weight, and VESA limits.

USX MOUNT 42–90-Inch Mount: Large-Screen Support with a Low Profile

This USX MOUNT option is designed for larger TVs, from 42 to 90 inches, with a maximum weight of 132 pounds. It accommodates VESA patterns from 200 × 100 mm to 600 × 400 mm and is specified for wood studs spaced up to 16 inches. Confirm your TV’s measurements before choosing it, especially if the mounting holes are close to the limits.

The dual articulating arms extend up to 16.49 inches and retract to 2.4 inches, giving it the shortest retracted profile among the five picks listed here. It tilts up 5 degrees or down 15 degrees, swivels up to 45 degrees in either direction, and offers a small leveling adjustment after installation.

A bubble level, cable ties, and standard hardware are included. Concrete anchors are not included, but the product information says they can be requested. The instructions also call out a specific bolt position for 16-inch studs, making it important to follow the installation guidance rather than assume every hole position will work.

Pros:

  • Supports TVs up to 90 inches and 132 pounds
  • Retracts to a slim 2.4-inch profile
  • Provides tilt, swivel, and post-installation leveling
  • Includes a bubble level and cable ties

Cons:

  • Concrete anchors are not included
  • Maximum swivel depends on the TV and installation setup

Verdict: This USX MOUNT is a strong match for a compatible large TV when a low retracted profile matters and your wall has suitable wood studs.

How to Choose a Full-Motion TV Wall Mount

Check the TV’s size and weight

Match your TV to the mount’s stated size range and maximum weight capacity. Screen size is only part of the fit: a TV may fall within the listed diagonal range but still exceed the weight limit. Leave a margin where possible, and verify the exact model’s specifications before ordering.

Match the VESA pattern

VESA is the spacing between the mounting holes on the back of your TV. Measure the horizontal and vertical distance between the holes, usually in millimeters, and compare that pattern with the mount’s supported range. A mount that fits the TV size but not its VESA pattern will not work.

Confirm your wall type and stud spacing

These mounts need to be secured to a suitable structure, such as the specified wood studs or a compatible concrete or brick wall. Do not install them on drywall alone. Check the wall-type instructions and the distance between studs, and confirm whether the correct anchors are included or must be requested.

Choose the reach and movement you need

A longer arm can help you angle a screen toward seats off to the side or pull it out for access to rear ports. A shorter retracted distance keeps the TV closer to the wall. Compare both measurements, along with the stated tilt and swivel range, to the room where you plan to install the mount.

Consider the TV’s clearance and final position

The screen, mount, and nearby walls or furniture all affect how far the TV can turn. A large TV may not reach the mount’s maximum swivel angle if its edges hit a wall. Think about where the screen will sit when retracted and how much room it needs to move.

Review the installation materials

Templates, clear instructions, pre-labeled hardware, and a bubble level can make setup easier. Check the package details for the wall hardware you need. If you are unsure whether your wall can support the mounted TV or how to locate a suitable attachment point, get help from a qualified installer.

Frequently Asked Questions

Do these mounts hold two TVs at once?

No. The products in this guide are designed to hold one TV each. “Dual” refers to the articulating arms used by several of these mounts, not two separate screens.

Can I install a full-motion TV mount directly on drywall?

No. The listed mounts are designed for suitable wood studs or, where specified, concrete or brick. Do not attach a TV mount to drywall alone.

How do I know if a mount fits my TV?

Check the TV’s screen size, weight, and VESA mounting pattern against the mount’s specifications. All three must fall within the supported limits.

What does VESA mean?

VESA describes the spacing between the mounting holes on the back of a TV. Compare the measured hole pattern with the mount’s supported VESA range.

Why does a mount swivel less with some TVs?

The actual swivel angle can depend on the TV’s size and the room layout. A wide screen may reach a wall or another obstacle before the arm reaches its full stated angle.

Are concrete anchors included?

It depends on the model. The Perlegear product information lists concrete or brick anchors in the package. The two USX MOUNT descriptions say concrete anchors are not included but can be requested, while the other product details advise checking with the manufacturer for the needed hardware.

Final Recommendation

For a large TV and a broad range of movement, the Perlegear stands out for its 42–90-inch fit, 132-pound capacity, and stated swivel range. If keeping the TV close to the wall matters most, consider the 42–90-inch USX MOUNT, which retracts to 2.4 inches. For any pick, confirm your TV’s weight and VESA pattern, then make sure your wall and stud spacing meet the installation requirements.

Rate this post
Spread the love

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top