Product reviewHeating & Cooling

Best E Tankless Water Heaters: Compare Sizing, Power and Picks

Updated 10 min read

Reader-supported: when you buy through links on our site, we may earn an affiliate commission at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases. Learn more.

Electric tankless water heaters can free up space and heat water only when you open a hot-water tap, but choosing one is mainly a sizing and electrical-capacity decision. A compact 120-volt model may suit a single sink, while a larger whole-home unit can require several dedicated circuits and a substantial electrical service. Compare the flow you need, your incoming water temperature, and the installation requirements before you buy.

Quick Comparison

ProductBest suited forPower or key featureImportant consideration
Rheem RTEX-24Multiple fixtures, when properly sized24 kW, 240 V; up to 5.9 GPMRequires three 40-amp double-pole breakers and a recommended 200-amp household panel
Stiebel Eltron DHC-E 8/10Booster applicationsCopper heating chamber; microprocessor controlsListing is marked unavailable; check availability and application details
3000W 110V Instant Water HeaterLow-flow, point-of-use use3,000 W, 110 V; LED displayListing says it is not suitable for a shower
EcoSmart ECO 8Small-scale applications where 8 kW fits the demand8 kW electric unitConfirm expected flow and electrical requirements for your installation
ThermoMate 3500W 120VUnder-sink or over-sink hot water3,500 W, 120 V; stated flow of 0.4–0.66 GPMHardwired unit; listing specifies a 32-amp double-pole breaker

Our Picks: Best E Tankless Water Heaters reviews

1. Rheem RTEX-24: A Higher-Capacity Choice for Multiple Fixtures

The Rheem RTEX-24 is the largest-capacity option in this selection. It is a 24 kW, 240-volt electric tankless heater that the product information rates at up to 5.9 GPM. That makes it the most plausible choice here for serving more than one fixture, provided your household’s flow needs and incoming water temperature are within the unit’s capacity.

Its digital temperature control adjusts in one-degree steps from 80°F to 140°F. The compact design does not need venting, but the electrical requirements are substantial: the listing calls for three 40-amp double-pole breakers, three sets of #8 AWG copper conductors with ground, and a recommended minimum 200-amp household service panel. Have an electrician confirm that your panel and wiring can support it before ordering.

Compared with the small point-of-use models below, the RTEX-24 is built for a much larger hot-water demand, not just a single sink. Its stated maximum flow should not be treated as a guarantee at every temperature or for every combination of fixtures. Actual performance depends on the incoming water temperature and the amount of hot water you draw.

Pros:

  • Rated for up to 5.9 GPM, making it the strongest multi-fixture option in this group.
  • Digital temperature settings adjust in one-degree increments.
  • Does not require venting.
  • Compact format can free up floor space compared with a traditional tank.

Cons:

  • Requires several dedicated circuits and a recommended 200-amp household service panel.
  • May be a poor fit if your home needs only a small amount of point-of-use hot water.

Verdict: Choose the Rheem RTEX-24 if you need a higher-capacity electric unit and an electrician confirms your home can meet its demanding power requirements.

2. Stiebel Eltron DHC-E 8/10: A Booster-Focused Compact Option

The Stiebel Eltron DHC-E 8/10 is described as a compact electric heater with a solid copper heating chamber and microprocessor controls. The supplied product details specifically mention booster applications and say the unit accepts incoming water temperatures up to 131°F. That makes it worth considering for a setup where the incoming water is already warm and the goal is to boost it, rather than assuming it can cover every household hot-water need.

The listing also describes a design intended to limit scalding and a seismic-proof construction. It does not provide enough detail here to compare its output flow or electrical requirements with the Rheem, so check the product specifications and installation instructions carefully before deciding whether it suits your plumbing and power supply.

The listing is marked unavailable in the supplied product information. Availability can change, so confirm that the product can be purchased and verify the exact model before planning an installation.

Pros:

  • Product information identifies it as suitable for booster applications.
  • Solid copper heating chamber.
  • Microprocessor controls.
  • Accepts incoming water temperatures up to 131°F, according to the listing.

Cons:

  • The supplied listing is marked unavailable.
  • Flow capacity and electrical requirements are not stated in the provided details.

Verdict: Consider the DHC-E 8/10 for a compatible booster application, but confirm availability, output, and installation requirements before choosing it.

3. 3000W 110V Instant Water Heater: A Low-Flow Point-of-Use Unit

This 3,000-watt, 110-volt unit is a small point-of-use heater with an LED display and a compact wall-mounted design. The listing describes a temperature increase of 82°F at 0.3 GPM and a rise of up to 131°F at 0.5 GPM. Those figures indicate a low-flow role, such as supplying a nearby sink, rather than running a typical shower.

In fact, the listing explicitly says this heater is not suitable for a shower, noting that a shower normally requires at least 1.8 GPM. It may appeal if you want hot water close to a kitchen or bathroom fixture, but its stated flow range is far below the needs of many whole-home uses. The product information also lists 13 AWG wiring and a breaker of at least 32 amps; verify the exact electrical instructions with the manufacturer and a qualified electrician before installation.

The description mentions several protective features and an IPX4 rating. It also says the unit has standard 1/2-inch NPT connections. Check the exact installation requirements and certification details rather than relying on a general description alone.

Pros:

  • Compact design intended for point-of-use installation.
  • LED display and Fahrenheit/Celsius selection.
  • Stated low-flow output may suit a nearby sink.
  • Listing describes multiple protective features.

Cons:

  • Not suitable for a shower, according to the product description.
  • Electrical wiring and breaker requirements should be confirmed before purchase.

Verdict: Choose this model only for a low-flow point-of-use job, and rule it out if you need shower or whole-home hot water.

4. EcoSmart ECO 8: An 8 kW Unit to Match Carefully to Your Demand

The EcoSmart ECO 8 is an 8 kW electric tankless water heater. The supplied product details are limited, so there is not enough information here to assign it a reliable flow rate or say which fixtures it can serve. With a unit in this power range, the right fit depends on how much water you need and how cold the incoming water is.

Before buying, compare the manufacturer’s sizing information with your expected use, and confirm the required voltage, breaker, wiring, and minimum flow. The listed dimensions are 12 by 8 by 4 inches, which may help when planning a compact installation, but space alone does not determine whether the heater can meet your hot-water demand.

Compared with the Rheem RTEX-24, the ECO 8 is a much lower-wattage option. Compared with the small 3,000- and 3,500-watt units, it has a higher stated power rating, but that does not by itself establish which fixtures it can handle. Use the maker’s sizing guidance rather than guessing from the product name.

Pros:

  • 8 kW electric design.
  • Listed dimensions are 12 by 8 by 4 inches.
  • May suit an installation where its output and electrical needs match the household demand.

Cons:

  • The supplied details do not state flow capacity or temperature rise.
  • You will need to verify its electrical and installation requirements before purchase.

Verdict: The ECO 8 is worth considering when its verified output fits a modest hot-water demand; do not choose it for multiple fixtures without confirming its sizing limits.

5. ThermoMate 3500W 120V: A Hardwired Heater for a Sink

The ThermoMate is a 3,500-watt, 120-volt tankless heater intended for under-sink or over-sink use. Its listed flow range is 0.4 to 0.66 GPM, and the temperature setting runs from 86°F to 131°F. It is a better match for a nearby faucet than for a shower or a large household demand.

Its small 7.9-by-6.4-by-2.5-inch size may help where cabinet space is tight. The listing says it must be hardwired and has no plug. It also specifies a 32-amp double-pole circuit breaker and a minimum 10 AWG wire size. Because electrical requirements need to match the product and local code, have a qualified electrician verify the wiring and circuit before installation.

The product description mentions self-modulating power, a digital temperature display, and a cast aluminum heating element separated from the water line. It also lists standard 1/2-inch NPT connections. These features make it a practical candidate for a single sink, but they do not change the unit’s limited stated flow.

Pros:

  • Small form factor for tight spaces around a sink.
  • Digital temperature display with one-degree adjustment.
  • Stated 0.4–0.66 GPM flow range for point-of-use applications.
  • Listing identifies it as ETL certified.

Cons:

  • Must be hardwired; it is not a plug-in unit.
  • Its stated flow range is intended for a sink, not a high-demand application.

Verdict: Pick the ThermoMate if you need compact, hardwired hot water at one sink and its electrical requirements fit your installation.

How to Choose an Electric Tankless Water Heater

Start with the number of fixtures you will use

Decide whether the heater will serve one sink, one bathroom, or several fixtures at the same time. A point-of-use model with a listed flow below 1 GPM is not a substitute for a higher-capacity whole-home unit. If you expect multiple taps or a shower to run together, add up the likely flow and compare it with the heater’s rated output.

Account for incoming water temperature

A heater must raise incoming water to your target temperature. Colder incoming water requires a larger temperature rise, which can reduce the flow a unit can deliver. Check the manufacturer’s flow and temperature-rise information for conditions similar to your home rather than relying on a maximum flow figure alone.

Check your electrical service before choosing a model

Electric tankless heaters can have demanding wiring and breaker requirements. The Rheem RTEX-24, for example, lists three 40-amp double-pole breakers and recommends a minimum 200-amp household service panel. Smaller units have different requirements, and those details must be confirmed for the exact model. Ask a qualified electrician to check your panel capacity, wiring, and local code requirements before purchase.

Choose between whole-home and point-of-use installation

A whole-home heater supplies hot water from a central location, while a point-of-use unit is installed near a particular sink or fixture. Point-of-use models can be compact, but their lower stated flow makes them a poor choice when you need to run a shower or several fixtures. Match the installation style to the job instead of choosing by size alone.

Confirm connections, controls, and installation details

Review the unit’s water connections, temperature range, mounting needs, and wiring instructions. Some models include a digital display or adjustable temperature settings, while others provide less detail in the product information. Have a licensed professional review the instructions if you are unsure about plumbing, electrical, or code requirements.

Compare the full cost of installation, not just the heater

A compact heater may still need dedicated wiring, a breaker, plumbing changes, or an electrical-service upgrade. Ask an electrician or plumber to assess your setup before you commit. Tankless operation avoids keeping a stored tank of water hot, but energy use and savings depend on your household’s hot-water habits and installation.

Frequently Asked Questions

Can an electric tankless water heater run a whole home?

Some higher-capacity units are designed for larger demands, but suitability depends on rated flow, incoming water temperature, and how many fixtures you use at once. Confirm the manufacturer’s sizing guidance and your electrical capacity before selecting a model.

Is a 3,000-watt tankless heater enough for a shower?

The 3,000-watt model in this selection is explicitly described as not suitable for a shower. Its listing gives a low flow range of 0.3 to 0.5 GPM, while noting that a shower normally requires at least 1.8 GPM.

Do electric tankless water heaters need venting?

The Rheem RTEX-24 product information says it does not require venting. Check the installation instructions for any other model you are considering rather than assuming that all units have identical requirements.

What size electrical panel do I need?

Requirements vary by model. The Rheem RTEX-24 listing recommends a minimum 200-amp household service panel and calls for three 40-amp double-pole breakers. Other heaters have different requirements, so ask an electrician to verify your specific unit and home.

Can I install a tankless electric water heater myself?

Installation can involve plumbing, high-current wiring, and local code rules. The safest approach is to have qualified professionals confirm the electrical and plumbing requirements and complete the work when needed.

Will a tankless heater always lower my energy use?

Tankless units heat water when a hot-water tap is turned on rather than maintaining a stored tank at temperature. That can reduce standby energy use, but actual energy use and potential savings depend on your household’s hot-water use and the system’s sizing and installation.

Final Recommendation

For the broadest hot-water demand in this group, the Rheem RTEX-24 is the clearest option, provided your home can meet its substantial electrical requirements. For a single sink, the ThermoMate or 3,000-watt model is a more focused choice, but neither should be treated as a shower heater. The EcoSmart ECO 8 and Stiebel Eltron DHC-E 8/10 need closer specification checks before purchase, especially for flow and installation fit. In every case, size the heater to your actual fixtures and have an electrician verify the circuit requirements first.

Rate this post
Spread the love

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top