Product reviewDoors, Windows & Floors

Best Exterior French Door Locks: Compared by Fit, Security and Finish

Updated 9 min read

Reader-supported: when you buy through links on our site, we may earn an affiliate commission at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases. Learn more.

Choosing an exterior French door lock starts with checking how your doors are drilled and how the two leaves meet. The right set should fit your door thickness and hole spacing, provide a keyed lock on the active door, and include a matching handle for the other side if you want a coordinated look. These three options cover a range of finishes and fit details, but they differ in adjustability, security features, and stated availability.

Quick Comparison

ProductKey featuresBest forAvailability
HISAFE Matte Black Double French Door Handle SetKeyed handle and deadbolt plus a dummy handle; adjustable lower connectionFrench doors with varied hole spacingListed as available
Camtek Double Front Door Handle and Deadbolt SetReversible design, two latch backsets, keyed entryMatte-black replacement hardware for standard door prepListed as available
Kwikset Brentford French Door HandlesetKeyed handle and deadbolt, dummy handle, SmartKey re-keyingTraditional styling and documented security certificationListed as unavailable

Our Picks: Best Exterior French Door Locks reviews

HISAFE Matte Black Set: Adjustable Fit and a Matching Dummy Handle

The HISAFE set includes two handlesets: one keyed entry handle with a deadbolt and one non-locking dummy handle. That pairing is useful for a typical double-door arrangement where one leaf is the active entry door and the other needs a matching pull handle. The matte-black finish gives the set a coordinated look across both doors.

Its lower handle connection adjusts to fit a stated hole distance of 8⅓ to 9⅚ inches. The set includes latch options for 2⅜-inch and 2¾-inch backsets and is specified for doors from 1⅜ to 2 inches thick. Those ranges give it broader stated thickness compatibility than the Camtek set, though you should still measure your door before ordering.

The handles are non-handed, so the set is intended for either left- or right-handed doors. Installation is described as a screwdriver job, with hardware included. As with any replacement lock, matching the existing bore holes and getting the latch and strike lined up correctly will matter more than the general promise of an easy install.

A key limitation is that the dummy handle does not lock. It is a handle for the inactive door, not an added security point. Check how your inactive leaf is secured—such as whether it has suitable flush bolts—before relying on the active door’s deadbolt as the only lock for a pair of exterior doors.

Pros:

  • Includes a keyed handleset and a matching dummy handleset.
  • Adjustable lower connection accommodates a stated range of hole spacing.
  • Fits a stated door-thickness range of 1⅜ to 2 inches.
  • Non-handed design can suit left- or right-handed doors.

Cons:

  • The dummy handle is non-locking, so the inactive door needs its own suitable securing method.
  • Its larger fit range does not guarantee compatibility with every existing door preparation.

Verdict: Choose the HISAFE if you want a coordinated keyed-and-dummy set and need more flexibility in door thickness or lower hole spacing than the other available option specifies.

Camtek Double Door Set: Reversible Design in Matte Black

Camtek’s matte-black set is made from zinc alloy and is described as a double front-door handle and deadbolt set. Its reversible handle design is intended to work with either door handing. The keyed handle locks from inside with a turn button and opens from outside with the supplied keys.

The set includes two adjustable latch backsets—2⅜ or 2¾ inches—and is specified for doors from 1⅜ to 1¾ inches thick. Its through-bolt slides to accommodate a stated 1½-inch adjustment range. The description says it can use existing holes, but it also stresses that the parts need to line up correctly during installation. Measure your existing prep rather than assuming that every French door will accept it without modification.

Camtek says the keyed handle and deadbolt use the same keys. That can simplify entry compared with carrying separate keys for the two locks. The product details do not explicitly list a separate dummy handleset, so confirm what is included if you need matching hardware for the inactive door. This is an important distinction from the HISAFE and Kwikset listings, which explicitly describe a dummy handle.

The stated door-thickness range is narrower than HISAFE’s, and the description does not provide a finish warranty or a security-grade certification. Its main appeal is a reversible matte-black design with adjustable latch and through-bolt dimensions for doors that fall within its listed fit range.

Pros:

  • Reversible design is intended for left- or right-handed doors.
  • Includes two latch backset options.
  • Keyed handle and deadbolt use the same keys, according to the product details.
  • Matte-black zinc-alloy construction is specified.

Cons:

  • The stated door-thickness range ends at 1¾ inches.
  • A separate dummy handle is not explicitly listed in the supplied product details.

Verdict: The Camtek is a reasonable option if your door thickness and existing holes match its specifications and you want a reversible matte-black set; verify the package contents if you need a handle for both door leaves.

Kwikset Brentford: Traditional Styling and SmartKey Re-Keying

The Kwikset Brentford is a satin-nickel double-door set with a traditional knob design and beveled detailing. It includes a keyed handleset with a deadbolt for the active door and a matching inactive dummy handleset. The product description specifies a 1¾-inch-thick door and adjustable latch backsets of 2⅜ or 2¾ inches.

Its SmartKey feature is designed to let you re-key the lock yourself using the included tool. The package details also list two Kwikset keys, adjustable latches, strikes, installation hardware, and an Allen wrench. A fully adjustable through-bolt is intended to help the handle fit a range of existing lower connection points, although the door must still have the required hole or drilled connection point.

The product description states that the keyed deadbolt is Grade AAA BHMA certified for security, durability, and finish. That certification applies to the keyed deadbolt, not the entire door assembly. The quality of the door, frame, strike installation, and inactive-leaf hardware still affects how secure the complete French-door setup is.

The main practical drawback is availability: this item is listed as unavailable in the supplied product information. Availability can change, but if you need hardware right away, the HISAFE or Camtek may be easier to consider. The Kwikset is also satin nickel rather than matte black, so it suits a different finish preference.

Pros:

  • Includes a keyed handleset and a matching inactive dummy handleset.
  • SmartKey technology is designed for owner re-keying.
  • Keyed deadbolt is stated to have Grade AAA BHMA certification.
  • Adjustable through-bolt helps accommodate different lower connection points.

Cons:

  • Listed as unavailable in the supplied product information.
  • Specified for 1¾-inch-thick doors, so it may not suit thinner or thicker doors.

Verdict: Consider the Kwikset if you prefer satin nickel, want SmartKey re-keying, and can confirm it is available; its stated deadbolt certification is a useful point of distinction, but it is not a complete-door security guarantee.

How to Choose an Exterior French Door Lock

Check the Door Thickness and Existing Hole Layout

Measure the thickness of each door and compare it with the lock’s stated range. Also check the bore hole, latch backset, and distance between the handle’s upper and lower mounting points. A set may include adjustable latches and still fail to match the lower handle hole on your door. The HISAFE lists a 1⅜-to-2-inch thickness range and a specific adjustable lower-hole distance; Camtek lists a 1⅜-to-1¾-inch thickness range. Kwikset specifies a 1¾-inch door.

Know Which Door Leaf Is Active

On many double-door setups, one leaf is used for everyday entry while the other stays secured until needed. A keyed handleset belongs on the active leaf. The inactive leaf may use a dummy handle for a matching appearance, but that handle does not lock. Check whether your inactive leaf has its own flush bolts or another way to secure it to the frame before choosing a set.

Choose a Deadbolt and Consider the Whole Door Assembly

A deadbolt adds a locking point to the active door, but the lock is only one part of the setup. The door frame, strike placement, door condition, and hardware on the second leaf all matter. Of these options, only the Kwikset description states a BHMA certification, and it applies to the keyed deadbolt. Do not treat that detail as a certification of the entire door or French-door pair.

Match the Handle Direction and Finish

Confirm that the handle works with your door’s handing. HISAFE describes its set as non-handed, and Camtek calls its design reversible. Choose a finish that suits the other exterior hardware as well: HISAFE and Camtek are matte black, while the Kwikset is satin nickel. Product photos can help with appearance, but check the written specifications for fit.

Check What Comes in the Package

For double doors, confirm whether the package includes both a keyed handleset and a dummy handle. HISAFE and Kwikset explicitly list both. Camtek’s supplied details describe a double-door handle and deadbolt set but do not explicitly identify a separate dummy handleset. Also check for included latches, strikes, keys, and installation hardware so you know what may need to be sourced separately.

Plan for Careful Installation

These products are described as DIY installations, generally using a screwdriver, but alignment is important. Before removing your existing hardware, compare the new set’s template or instructions with the door holes and frame strike. If the latch does not extend smoothly or the deadbolt does not line up with the strike, stop and correct the fit instead of forcing the lock.

Frequently Asked Questions

Can I use a regular entry lock on French doors?

It depends on the door preparation and how the two leaves are secured. A keyed handleset and deadbolt can go on the active leaf, but the inactive leaf may need its own securing hardware. Check the lock’s fit specifications and the arrangement of your doors before buying.

Does a dummy handle lock the inactive door?

No. A dummy handle is a non-locking handle used for appearance and operation. The inactive door needs suitable separate hardware, such as working flush bolts, if it is to stay secured.

What measurements should I take before ordering?

Measure door thickness, latch backset, bore-hole size and location, and the distance between the handle’s mounting points. Compare each measurement with the product specifications. If your existing holes do not match, installation may require changes to the door.

Are these sets reversible for left- and right-handed doors?

The HISAFE set is described as non-handed, and Camtek describes its handle as reversible. The supplied Kwikset details do not make the same handedness claim, so check its installation instructions against your door orientation before choosing it.

Do all three options include a matching handle for the second door?

HISAFE and Kwikset explicitly list a dummy handleset alongside the keyed set. The Camtek product details do not explicitly list a separate dummy handle, so confirm package contents if you need a matching handle on both leaves.

Which option has a stated security certification?

The Kwikset description states that its keyed deadbolt is Grade AAA BHMA certified for security, durability, and finish. That statement applies to the deadbolt only, not to the complete door assembly.

What if the lock does not line up with my existing holes?

Do not force the lock or deadbolt. Recheck the measurements and installation instructions, and confirm that the latch, handle, and strike are aligned. If the door preparation differs from the product’s requirements, you may need a different lock or help from a qualified installer.

Final Recommendation

For most shoppers comparing these options, the HISAFE is the most flexible starting point: it includes both a keyed handle and dummy handle and lists the broadest door-thickness range of the available choices. The Camtek is worth considering when its matte-black finish and fit specifications match your door, but verify whether its package includes the second handle you need. The Kwikset offers SmartKey re-keying and a stated deadbolt certification, though it is listed as unavailable in the supplied information. Measure first, and make sure the inactive door has its own way to stay secure.

Rate this post
Spread the love

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top