Finding exterior French doors with blinds between the glass takes a little care: some listings are complete entry doors, while others are replacement glass inserts or add-on blind kits for a door you already own. The options below include one complete exterior entry door, two ODL solutions for existing door glass, and two cordless curtain alternatives. Check the product type and measure your door before ordering—especially if you need a matching pair of French doors.
Table of Contents
Quick Comparison
| Product | What It Is | Best For | Important Fit Note |
|---|---|---|---|
| ODL Add-On Blinds, 24 x 66 in. | Blind-and-glass kit that installs over existing door glass | Doors with a raised glass frame | Outer frame must measure 24 x 66 in. |
| FammyLoft 32 x 80 in. FRP Entry Door | Complete exterior entry door with built-in blinds | Replacing a single entry door | Right-hand inswing; verify jamb and rough opening |
| ODL Enclosed Blinds, 24 x 38 in. | Replacement door glass insert with enclosed blinds | Replacing a compatible existing glass panel | Outer frame must measure 24 x 38 in. |
| NICETOWN Blackout French Door Curtain | Cordless, adhesive-mounted fabric shade | Adding privacy without replacing glass | One 24 x 72 in. panel; not blinds between glass |
| NICETOWN Linen Blackout Roman Shade | Cordless, adhesive-mounted fabric shade | A no-drill room-darkening option | One 24 x 72 in. panel; not blinds between glass |
Our Picks: Best Exterior French Doors With Blinds Between The Glass reviews
ODL Add-On Blinds for a Raised-Frame Door, 24 x 66 in.
This ODL kit adds enclosed blinds to an existing door without removing its original glass. The unit clips over the glass and raised frame, adding a second pane of tempered glass with the blinds inside. It is an add-on, not a replacement insert or a complete exterior door.
Fit is the deciding factor. The outside frame around your existing glass must measure 24 inches wide by 66 inches tall, within the listed tolerance. The glass area is smaller, at 22 by 64 inches. Most important, your door must have a raised frame that sits above the glass. This model is not designed for a flat frame, an impact-resistant aluminum frame, a window, or a sliding patio door.
The cordless controls let you raise, lower, and tilt the blinds by hand. Enclosing them helps keep them away from dust and prevents them from swinging when the door moves. Compared with the ODL replacement insert below, this is the option to consider when your existing glass is staying in place and the door frame is compatible.
Pros:
- Adds enclosed blinds without removing the original door glass
- Cordless controls adjust blind height and angle
- Blinds are protected behind an added glass pane
- Can suit a door with a compatible raised frame
Cons:
- Will not fit a flush or flat glass frame
- Exact outer-frame measurements are essential
Verdict: Choose this add-on only if your existing door has a raised frame and measures 24 by 66 inches around the glass; otherwise, look at a compatible replacement insert or complete door.
FammyLoft FRP Entry Door with Built-In Blinds
Unlike the ODL products, this is a complete entry door rather than a blind kit for existing glass. It has a black FRP surface, full-view Low-E glass, and built-in blinds. The listing describes the door material as basalt fiber and polyurethane foam and highlights resistance to moisture, dents, warping, and cracking.
This is a single 32-by-80-inch door, not a French door pair. It is specified as right-hand inswing: viewed from outside, the hinges are on the right and the door opens inward. The listed jamb width is 4-9/16 inches, and the specified rough opening is 34-3/4 inches wide by 82-3/8 inches high. Confirm these details against your opening and door swing before buying.
For someone replacing a single exterior entry door, this is the closest match in this list to a complete door with blinds built into the glass. It does not meet the need for a hinged French door set, and the supplied product details do not specify a matching second door. If you need a pair, confirm availability and compatibility with the seller rather than assuming one is included.
Pros:
- Complete entry door with built-in blinds
- Full-view Low-E glass is intended to bring in daylight while helping reduce heat transfer
- FRP surface is described as resistant to moisture, dents, warping, and cracking
- Door size, jamb width, and swing are specified for fit checks
Cons:
- It is a single entry door, not a French door pair
- Requires a compatible rough opening and right-hand inswing layout
Verdict: Consider this door if you are replacing a single entry door and its size and swing match your opening; it is not a direct solution for shoppers who need a pair of French doors.
ODL 24 x 38-Inch Enclosed Blind Replacement Glass Insert
This ODL product replaces an existing door glass panel with a double-pane tempered-glass unit that has blinds enclosed between the panes. The blinds raise, lower, and tilt with controls along the frame. Because the blinds are enclosed, they are less exposed to dust and do not swing freely when the door opens or closes.
Measure the outer frame of the glass panel—not just the visible glass. The required measurement is 24 by 38 inches, with a tolerance of one-quarter inch. The listing also specifies a 1-3/4-inch door thickness and describes this size as a fit for a half-light panel on a 6-foot-8-inch door. Two people are recommended for installation, and standard tools are needed.
This is a better fit than the 24-by-66-inch add-on when you need to replace a compatible half-light glass panel rather than cover a tall existing insert. It is still a component for an existing door, not a full door or a French door pair, so confirm that your current door and glass opening match its requirements.
Pros:
- Enclosed blinds are part of the replacement glass unit
- Cordless controls adjust light and privacy
- Designed for a common half-light door-panel configuration
- Can typically be installed with standard tools
Cons:
- Must match the existing panel’s outer-frame measurements
- Requires removing and replacing the current glass insert
Verdict: This is a practical option for replacing a compatible 24-by-38-inch door glass panel, but it will not help if you need a complete exterior door or a different insert size.
NICETOWN Cordless Blackout Curtain for French Doors
This NICETOWN panel is a fabric shade, not a French door or a blind system between glass panes. It comes as one 24-by-72-inch curtain panel with an adhesive hook-and-loop mounting strip, pole accessories, and a cordless magnetic lift. Lift the bottom to gather the fabric into folds; pull it down for coverage.
The linen-look fabric has a light-blocking core, and the product is described as 100% blackout. That makes it a possible choice when room darkening and privacy matter more than having blinds built into the door glass. Its no-drill mounting may also appeal to renters or anyone who does not want to screw hardware into the door frame. The adhesive setup is a different kind of fit requirement: check the available mounting surface and measure the area the shade needs to cover.
Some owners find the magnetic lift simple to adjust and like the fabric’s finished appearance. Others may find the 72-inch length does not provide the coverage they expected, so measure the door and desired coverage carefully. Since this is an interior fabric treatment rather than an integrated glass unit, it is not a substitute for an exterior door with between-the-glass blinds.
Pros:
- Cordless magnetic lift holds the shade in raised folds
- Adhesive mounting avoids drilling
- Product is described as blackout and thermal insulating
- Linen-look fabric has a finished appearance on both sides
Cons:
- It is a curtain, not blinds between glass
- One 24-by-72-inch panel may not suit every door or opening
Verdict: Pick this as a no-drill privacy or room-darkening shade when an add-on curtain is acceptable; skip it if you specifically want built-in blinds in exterior door glass.
NICETOWN Linen-Look Blackout Roman Shade for Doors
This is another fabric alternative for a door, sold as one 24-by-72-inch panel. Its cordless magnetic lift gathers the shade into folds when raised, while the included adhesive mounting strap is intended to attach it without drilling. The product details describe a layered linen-look fabric intended to block light and provide thermal insulation.
The function is much like the other NICETOWN option, but this listing is identified as a linen Roman shade and comes in a linen-gray color. It can work for someone who wants a simple way to add privacy or reduce light without changing the glass. It does not have enclosed slats, and it is not a complete exterior door. Measure the door and check the adhesive mounting area before choosing it.
These fabric shades are easier to consider as removable room treatments than as built-in door hardware. The magnetic lift offers a straightforward way to raise and lower the fabric, but the panel size is fixed in the supplied details. For a true between-the-glass look with less fabric visible, the ODL inserts are more relevant—provided your existing door matches their precise dimensions.
Pros:
- Cordless magnetic lift adjusts the shade without dangling cords
- No-drill adhesive mounting is included
- Blackout fabric is intended to help block light
- Linen-look style can blend with room decor
Cons:
- Not an integrated blind or a replacement glass insert
- Fixed panel dimensions may not provide full coverage for every door
Verdict: Choose this shade for a cordless, no-drill fabric covering; choose an ODL insert or a compatible complete door if blinds between the glass are essential.
How to Choose Exterior French Doors With Blinds Between the Glass
Decide whether you need a whole door or a glass component
Start by identifying what you are replacing. A complete exterior door includes the door slab and its glass, while a replacement insert fits into an existing door. An add-on kit sits over existing glass and requires the right frame shape. These products are not interchangeable. In this selection, the FammyLoft is a complete single entry door; the ODL products are components for existing doors.
Check whether you need a French door pair
A French door opening often has two hinged panels, but not every product marketed for a door is sold as a pair. The FammyLoft listing describes one 32-by-80-inch door. The ODL inserts and add-on kit are individual pieces for existing door glass. Confirm the number of doors or inserts included and whether a matching second panel is available before ordering.
Measure the frame or rough opening carefully
For an insert or add-on, follow the product’s specific measurement instructions. The 24-by-66-inch ODL add-on is measured by the outer frame around the glass, while the 24-by-38-inch ODL insert also requires an outer-frame measurement. The FammyLoft door has its own jamb and rough-opening requirements. Measure more than once and do not assume the visible glass size is the size the product requires.
Match the glass-frame style and door thickness
The ODL add-on is made for raised frames and will not fit a flush or flat frame. The 24-by-38-inch replacement insert lists a 1-3/4-inch door thickness requirement. Check the shape and condition of your existing frame as well as its dimensions. If your door has a special impact-resistant frame or does not match the listed setup, confirm compatibility before purchasing.
Verify the door swing and installation space
For a complete door, confirm whether it swings inward or outward and which side has the hinges when viewed from outside. The FammyLoft option is specified as right-hand inswing. Also compare the listed jamb width and rough opening with your home’s opening. A door that is the right height and width can still be the wrong choice if its swing or jamb does not match.
Choose between integrated blinds and a fabric shade
Blinds between the glass are enclosed within a door glass unit, while a curtain or Roman shade mounts on the room side of the door. Enclosed blinds keep the window covering contained and avoid a loose fabric panel over the glass. Fabric shades can be a simpler no-drill alternative, but they do not provide the same integrated design. Pick based on your installation needs, preferred look, and desired light coverage.
Consider light, privacy, and upkeep
Built-in blinds let you change the angle and position of the slats for light and privacy. The NICETOWN fabric shades are designed for more complete light blocking, according to their product descriptions. Think about whether you want adjustable daylight, strong room darkening, or a balance of both. Also consider that an add-on glass kit changes the thickness of the existing glass assembly, while a fabric shade adds a covering on the room side.
Frequently Asked Questions
Are all of these products complete exterior French doors?
No. The FammyLoft is a complete single entry door. The ODL products are add-on or replacement glass components for an existing door. The NICETOWN products are fabric shades. None of the listed options is clearly described as a complete French door pair.
What is the difference between an ODL add-on kit and a replacement insert?
The 24-by-66-inch add-on installs over existing door glass and requires a raised frame. The 24-by-38-inch enclosed blind insert replaces an existing glass panel. Both depend on exact measurements, but they use different installation approaches and sizes.
How do I measure for the ODL add-on?
Measure the outside frame around the existing glass, not the visible glass itself. This model requires a 24-by-66-inch outer frame within the listed tolerance, and it only fits a raised frame. Compare your frame with the product’s measurement guide before ordering.
Can I use the 24-by-38-inch ODL insert in any door?
No. The listing specifies a 24-by-38-inch outer-frame measurement, a one-quarter-inch tolerance, and a door thickness of 1-3/4 inches. Check those details against your existing panel and door before purchase.
Do the NICETOWN shades have blinds between the glass?
No. They are fabric Roman-style shades that attach to the door with an adhesive mounting strip. They can add privacy and reduce light, but they are not enclosed blind systems or replacement glass.
What should I verify before ordering a complete entry door?
Check the rough opening, jamb width, door size, and swing direction. For the FammyLoft option, the supplied details specify a 32-by-80-inch door, a 4-9/16-inch jamb, a right-hand inswing, and a rough opening of 34-3/4 inches by 82-3/8 inches.
Final Recommendation
If your priority is a complete exterior door with built-in blinds, the FammyLoft is the closest match here, but it is a single right-hand-inswing entry door rather than a French door pair. For an existing door, choose the ODL add-on only if you have the required raised frame, or consider the 24-by-38-inch ODL insert if your current glass panel matches its specifications. The NICETOWN shades are useful alternatives for no-drill light control, but they are fabric coverings—not blinds between the glass.
