Best Exterior French Doors With Built In Blinds

Exterior doors with blinds sealed inside the glass offer privacy and light control without a separate window covering to dust or adjust. One important distinction: the products below are mostly single prehung or knock-down entry doors, not traditional French-door pairs with two opening panels. If you specifically need a pair, confirm the configuration before ordering. For a single door with built-in blinds—or a door described as an active leaf for a double-door setup—these options are worth comparing for material, handing, and installation requirements.

Quick Comparison

Our Picks: Best Exterior French Doors With Built In Blinds reviews

1. National Door Company Fiberglass Active Inswing Door

This primed fiberglass door is listed as a left-hand active inswing model. Its glass has internal white blinds and muntins enclosed between triple panes of clear, tempered Low-E glass. A single operator controls the blinds, keeping the adjustment mechanism inside the glass rather than exposed to everyday dust and handling.

The listing describes the door as part of a double-door setup, with the inactive side released by an astragal. That makes it especially important to verify exactly what is included and whether the listing matches your opening. The product weighs 206 pounds, so plan for careful handling and installation help.

The fiberglass surface arrives primed and ready for paint, which gives you room to coordinate it with your trim or exterior color. Compared with the other picks, it is the only option here specifically described with triple-pane glass and muntins. The available product information does not provide a rough-opening measurement, so confirm dimensions and handing with the seller before ordering.

Pros:

• Internal blinds and muntins are enclosed in triple-pane glass
• Single operator controls the blinds
• Primed fiberglass surface is ready to paint
• Described for an active-leaf double-door arrangement

Cons:

• Heavy at 206 pounds, which may make installation more challenging
• Confirm the included door configuration and opening dimensions before purchase

Verdict: Consider this model if you need a primed fiberglass active door with enclosed blinds and muntins, but verify the double-door details and measurements before committing.

2. National Door Company Steel Center-Hinged Patio Door

This National Door Company patio door is a center-hinged, right-hand inswing model with white blinds sealed inside clear, tempered glass. Its 24-gauge galvanized steel construction is described as resistant to rust and corrosion. The door comes primed and is prehung on a 4-9/16-inch-wide primed wood frame.

Pay close attention to the listed measurements: the actual unit is 67 inches wide by 81.75 inches high, and the stated rough opening is 67.5 by 82.25 inches. Those dimensions can help you decide whether the unit is a possible fit, but measure your own opening and confirm the product details before purchase.

This is the widest listed option in the comparison, but its title and description identify it as a center-hinged patio door rather than a standard French-door pair. The product information says the blinds are controlled by a single operator, although it does not detail the exact placement of the control. Its steel construction may suit shoppers who prefer a primed metal door, while the wood frame means the complete unit combines different materials.

Pros:

• Internal blinds are sealed behind tempered glass
• 24-gauge galvanized steel door is described as resistant to rust and corrosion
• Prehung frame and stated rough-opening dimensions are provided
• Primed finish is ready for paint

Cons:

• Its center-hinged patio-door configuration may not suit every French-door opening
• Confirm handing and measurements carefully before ordering

Verdict: This is a practical candidate for a wider center-hinged patio opening if its stated size and right-hand inswing match your layout.

3. National Door Company Primed Fiberglass Door with Mini Blinds

This prehung fiberglass exterior door has white mini blinds sealed between two panes of clear, tempered glass. The blinds use a single operator, and the fiberglass door is described as resistant to rot, warping, dents, and splitting. It arrives primed, ready for paint.

The listed package includes the door slab, frame with brickmould, glass with internal blinds, hinges, and sill. That makes it a more complete replacement-door package than the THSUPER knock-down kit, which requires frame assembly. This model is a left-hand inswing door; confirm the manufacturer’s handing guidance and your existing opening before ordering.

Available owner comments point to satisfaction with the door’s appearance and with receiving the internal-blind configuration they expected. Still, installation fit depends on your measurements and opening condition, and the supplied product details do not specify the unit dimensions. Ask for those measurements if they are not shown on the listing.

Pros:

• Internal mini blinds are sealed between two panes of tempered glass
• Fiberglass construction is described as resistant to common forms of wear
• Includes a frame with brickmould, hinges, and sill
• Primed surface can be painted to suit your home

Cons:

• Left-hand inswing configuration will not fit every entry
• Product details provided here do not state the unit dimensions

Verdict: Choose this model if you want a primed, prehung fiberglass door with enclosed mini blinds and the left-hand inswing matches your opening.

4. THSUPER Black Fiberglass Full-Lite Door Kit

This 32 × 80-inch right-hand inswing door has a black fiberglass surface with a brushed woodgrain texture and a full-lite glass panel. Its dual-pane glass combines a Low-E pane with a clear pane, with the blinds positioned between the glass. The listing says the Low-E pane helps reduce heat transfer.

The door uses fiberglass skins, reinforced LVL stiles, and a polyurethane foam core. The kit includes the door slab, white 4-9/16-inch PVC jamb, PVC brickmould, threshold, ball-bearing hinges, door shoe, and installation instructions. It is a knock-down kit, not a prehung door: frame assembly, shimming, sealing, and installation are required. The lockset, deadbolt, and handle are not included.

This model stands out for its black finish and clearly stated 32 × 80-inch size. It may appeal if you want a modern full-lite look and are prepared to assemble and install the frame. The slab and frame components ship in separate packages and may arrive at different times, so account for that when planning the project. It is a single entry door, not a two-panel French-door unit.

Pros:

• Black fiberglass finish with a brushed woodgrain texture
• Internal blinds, dual-pane glass, and a Low-E pane
• Stated 32 × 80-inch size with a right-hand inswing option
• PVC jamb and brickmould are included in the kit

Cons:

• Frame assembly and installation are required
• Lockset, deadbolt, and handle are not included

Verdict: This is the best fit for shoppers who want a black full-lite fiberglass door and are comfortable assembling a knock-down kit rather than installing a prehung unit.

5. National Door Company Primed Steel Door with Internal Mini Blinds

This right-hand inswing exterior door combines a 24-gauge galvanized steel slab with clear glass and internal mini blinds sealed between two panes. The blinds are controlled by a single operator. The steel is described as resistant to rust and corrosion, and the primed finish is ready for paint.

The product is listed as prehung, with the door slab, frame, sill, hinges, and weatherstrip included. That can simplify the parts list for a replacement project compared with a door slab that requires a separate frame. However, the supplied product details do not state the unit or rough-opening measurements, so get those before choosing it for an existing opening.

Compared with the fiberglass options, this model offers a steel door and a traditional primed finish rather than a factory-finished black surface. It is a single right-hand inswing door, not a French pair. Check the glass layout, dimensions, and handing against your project, especially if you are replacing a door that opens in the opposite direction.

Pros:

• Internal mini blinds are sealed between panes of glass
• 24-gauge galvanized steel is described as resistant to rust and corrosion
• Prehung package includes frame, sill, hinges, and weatherstrip
• Primed finish is ready for paint

Cons:

• Right-hand inswing limits where it will fit
• Confirm unit dimensions because they are not specified in the provided details

Verdict: Pick this model if you want a primed, prehung steel entry door with built-in mini blinds and have confirmed the opening and handing.

How to Choose an Exterior Door with Built-In Blinds

Confirm whether you need a French pair or a single door

A traditional French-door unit has two door panels, while most options in this comparison are single entry doors. A listing may use terms such as patio door, center-hinged door, or active inswing door, so check the photos and included components to understand what is actually supplied. If you need two panels, ask whether the price and package include both leaves, the inactive panel, and the astragal.

Measure the rough opening and the door unit

Measure the width and height of the framed opening, not just the old door slab. Compare those measurements with the product’s unit size and rough-opening requirements. For example, one listed patio door specifies a 67 × 81.75-inch unit for a 67.5 × 82.25-inch rough opening. Other products here do not provide dimensions in the supplied details, so request them before ordering rather than assuming a standard size.

Check handing and swing direction

Handing determines which side the hinges are on and which way the door opens. The product descriptions do not all use the same viewpoint when explaining handing, so follow the specific listing’s instructions and confirm them with the seller. A right-hand inswing door, for example, may not work as a replacement for a left-hand inswing door even if the size is correct.

Choose the material and finish for your project

The options here include fiberglass and galvanized steel. The fiberglass models are described as resistant to issues such as rot, warping, dents, or splitting, while the steel models are described as resistant to rust and corrosion. These are product descriptions, not a guarantee for every climate or installation. Primed doors need paint, while the THSUPER option comes with a black factory-finished surface.

Understand the glass and blind setup

Built-in blinds sit between glass panes, keeping them enclosed rather than exposed like a room-side shade. Check how many panes the listing specifies, whether the glass is tempered, and how the blinds are adjusted. The products range from two-pane glass with mini blinds to a triple-pane configuration with blinds and muntins. The THSUPER door also lists a Low-E pane, which its description says helps reduce heat transfer.

Compare prehung and knock-down installation

A prehung door includes a frame, while a knock-down kit needs the frame assembled and installed. Prehung models may offer a more complete replacement package, but they still require accurate measurement and proper installation. The THSUPER kit explicitly requires frame assembly, shimming, sealing, and installation; its handles and locks are also not included. Check the components list so you know what else your project requires.

Plan for delivery and installation

Exterior doors can be heavy and awkward to handle. One model in this group weighs 206 pounds, and the THSUPER kit ships in two packages that may arrive at different times. Check delivery details, confirm that you have help for handling the door, and consider professional installation if you are not comfortable setting and sealing an exterior frame.

Frequently Asked Questions

Are these all traditional French doors?

No. Most are single entry doors, and one is described as a center-hinged patio door. The first listing describes an active door for a double-door arrangement. If you need a complete French-door pair, confirm that both panels and required hardware are included before ordering.

What does “built-in blinds” mean?

It means the blinds are enclosed between panes of glass rather than hanging on the room side of the door. The listed products describe blinds controlled by a single operator, though the exact control design can vary by model.

Can I paint a primed door?

The National Door Company models in this comparison are described as primed and ready to paint. Follow the manufacturer’s preparation and paint instructions, and confirm those details for the specific model before finishing it.

How do I choose the correct handing?

Use the handing instructions for the exact product, since descriptions may refer to viewing the door from different sides. Confirm which side the hinges belong on and whether the door swings in or out. If you are unsure, ask the seller or installer to verify the configuration.

Do these doors come with locks and handles?

Not all of them. The THSUPER product specifically says its lockset, deadbolt, and door handle are not included. Check each listing’s included-components section before you buy.

Is a prehung door easier to install than a knock-down kit?

A prehung door comes with its frame, while a knock-down kit requires frame assembly. Both need careful measurement and installation. The THSUPER listing specifically calls for assembly, shimming, sealing, and installation, so it may require more preparation than a prehung option.

Final Recommendation

For a prehung fiberglass option with enclosed mini blinds and a straightforward primed finish, the National Door Company EFS686BLFS28L is a strong place to start, provided its left-hand inswing and dimensions match your opening. If you prefer steel, compare the National Door Company Z002397R and EMJ684BLPR210R based on their different configurations and measurements. Choose the THSUPER kit for its black full-lite look only if you are ready for frame assembly. Most importantly, verify whether you need a single door or a true French-door pair, then confirm the handing, unit size, and included parts before ordering.