Gas instant water heaters heat water as you need it instead of storing it in a tank. That can save space and help reduce standby energy use, but the right model depends on how much hot water your home needs at once and how cold your incoming water is. Below, we compare five indoor natural gas options by capacity, stated efficiency, controls, and practical fit.
Table of Contents
Quick Comparison
| Product | Stated Capacity | Notable Feature | Best For |
|---|---|---|---|
| Rheem RTG Series 7.0 GPM | 160,000 BTU; 7.0 GPM at a 35°F rise | Leak detection and temperature control | Homes with several hot-water needs |
| ThermoMate CZ422NG | 102,000 BTU; up to 5 GPM | Diagnostic display and multiple safety protections | Smaller homes and moderate demand |
| VEVOR 100,000 BTU Indoor Heater | 100,000 BTU | LED screen and touch controls | Basic indoor hot-water needs |
| GASLAND Gasmart E | 199,000 BTU; up to 7.6 GPM | High stated flow capacity | Homes with heavier simultaneous use |
| APUS 95,000 BTU Indoor Heater | 95,000 BTU; up to 4.42 GPM | Low-flow start and compact design | Smaller households seeking steady temperature |
Our Picks: Best Gas Instant Water Heaters reviews
1. Rheem RTG Series: A Higher-Capacity Pick with Leak Protection
The Rheem RTG is an indoor, non-condensing natural gas tankless water heater rated at 160,000 BTU per hour. Its stated flow is 7.0 GPM at a 35°F temperature rise, and the product description says it can support two to three simultaneous showers under suitable conditions. Actual output depends on your incoming water temperature and the amount of hot water being used.
It has a wall-mounted design, a digital temperature control with adjustments listed to within ±1°F, and built-in freeze and flame-failure protection. One standout feature is LeakGuard leak detection and prevention, which is designed to detect internal leaks. Its listed UEF is 0.82, though real energy use will depend on household demand and installation.
This model may suit a larger household replacing a tank heater and looking for a higher-capacity unit with added leak monitoring. The main limitation is that a 7.0 GPM rating is tied to a specific temperature rise; it should not be treated as the flow available in every climate or installation. The product listing also indicates that availability can vary, so confirm it before planning a purchase.
Pros:
- Stated 7.0 GPM flow at a 35°F rise
- Leak detection and prevention feature
- Digital temperature control with fine adjustments
- Wall-mounted design frees up floor space
Cons:
- Non-condensing design requires a suitable direct-vent installation
- Its flow rating depends on temperature rise and conditions
Verdict: Choose the Rheem if its capacity, venting needs, and installation requirements fit your home, especially if leak detection is a priority.
2. ThermoMate CZ422NG: Compact Capacity with Diagnostic Controls
The ThermoMate CZ422NG is an indoor natural gas model with a stated maximum output of 102,000 BTU and flow of up to 5 GPM. The manufacturer describes it as suitable for two showers at once when inlet water is 65°F and the outlet is 105°F. That example is useful context, but colder incoming water or more simultaneous use can reduce available flow.
The unit includes a 3.5-inch LED display, temperature settings from 90°F to 140°F, and diagnostic codes intended to help identify operating issues. Its listed dimensions are 21 inches high, 13 inches wide, and 7 inches deep. The product description also lists freeze protection, a 120V power connection, and several safety protections. Its stated UEF is 0.81.
At up to 5 GPM, this model is a more moderate-capacity option than the Rheem and GASLAND picks. It may be a practical fit for a smaller household or a home with fewer simultaneous hot-water demands. Before buying, confirm that its gas, water, power, and vent connections match your installation plan; the product listing specifies connection sizes, but a qualified installer should verify compatibility.
Pros:
- Temperature settings from 90°F to 140°F
- Diagnostic display and operating-status information
- Compact listed dimensions for an indoor unit
- Multiple listed safety protections, including freeze protection
Cons:
- Lower stated maximum flow than the highest-capacity models here
- Performance depends on inlet temperature and simultaneous demand
Verdict: The ThermoMate is worth considering when you want a compact indoor unit with useful diagnostics and your household’s hot-water demand is moderate.
3. VEVOR 100,000 BTU: A Straightforward Indoor Option
This VEVOR indoor gas tankless heater is listed at 100,000 BTU per hour. It has a touch panel and LED display for showing water temperature and operating status. The product description emphasizes temperature control within ±1°F, but does not provide a flow rate in the supplied specifications, making it harder to compare directly with the models that list GPM.
Its stated safety features include protection against flameout, overheating, dry burning, leaks, and freezing, among others. The description lists a 1/2-inch NPT connector and a vent outlet for direct venting. Confirm the required vent setup and all connection details before purchase, since indoor gas appliances need a compatible installation.
Compared with the ThermoMate and APUS, the VEVOR listing provides less information about flow capacity and temperature range. That makes it a less certain choice for households trying to plan several simultaneous uses. It may be worth a look if its specifications and installation details meet your needs, but ask the seller or installer to verify the capacity for your home before relying on it for whole-house demand.
Pros:
- LED display and touch controls
- Multiple listed operating and safety protections
- Indoor design with a vent outlet for direct venting
Cons:
- The supplied specifications do not state a GPM flow rate
- Less capacity detail is provided for comparing simultaneous use
Verdict: Consider the VEVOR only after confirming its flow capacity and venting requirements for your particular home.
4. GASLAND Gasmart E: The Highest Stated Flow in This Lineup
The GASLAND Gasmart E is an indoor natural gas model rated at 199,000 BTU, with a stated maximum flow of up to 7.6 GPM. That is the highest listed flow among these five options, so it may be a better starting point for a household with multiple hot-water needs. The “up to” figure is not a guarantee of that flow in every installation; water temperature rise and other conditions affect output.
The product description lists a UEF of 0.8, a compact wall-mounted design, and safety features including overheat, flame-out, and freeze protection. GASLAND also describes a replacement warranty for a unit that stops working within a year and U.S.-based customer support. Check the listing for the full warranty terms and installation requirements before making a decision.
This model has greater stated capacity than the ThermoMate, VEVOR, and APUS, but that extra capacity may not be useful if your home’s gas supply or venting cannot support the unit. The product description does not provide as much detail about temperature-control settings as some competitors, so compare the control features as well as the GPM figure.
Pros:
- Highest stated maximum flow in this comparison
- 199,000 BTU rating for higher-demand households
- Wall-mounted design and listed freeze protection
- Product description includes warranty and support details
Cons:
- Actual flow depends on installation and temperature rise
- High capacity may require gas and venting work to be checked carefully
Verdict: The GASLAND is the strongest capacity candidate here for a busy home, provided a qualified installer confirms your home can support it.
5. APUS 95,000 BTU: Compact Design with Low-Flow Start
The APUS natural gas tankless heater is rated at 95,000 BTU and up to 4.42 GPM. Its listed low-flow start is 0.66 GPM, which may help the unit begin heating when water use is modest. The manufacturer describes it as capable of serving two showers and a sink at once, but that claim depends on conditions such as incoming water temperature and the flow needed at each fixture.
The unit has temperature settings from 95°F to 140°F and a listed control accuracy of ±1°F. Its stated dimensions are about 20.55 inches high, 13.27 inches wide, and 5.91 inches deep. The product description also lists an LED touchscreen, a 120V power connection, freeze protection, and a two-year coverage period. It reports a UEF of 0.81.
With lower stated capacity than the Rheem and GASLAND, APUS is better suited to a smaller household or a home with moderate demand. Its compact measurements and low-flow start are useful details, but the product description says the unit should be fully drained if it will be unused for a long time in freezing conditions. Do not assume built-in freeze protection eliminates the need to protect or drain the system in every situation.
Pros:
- Low-flow start listed at 0.66 GPM
- Compact dimensions and touchscreen controls
- Temperature settings from 95°F to 140°F
- Two-year coverage listed in the product description
Cons:
- Lower maximum flow than the higher-capacity options
- Requires draining for extended periods of disuse in freezing conditions, according to the description
Verdict: The APUS is a sensible option to compare for a smaller home that values compact size and low-flow operation over maximum capacity.
How to Choose a Gas Instant Water Heater
Estimate Your Peak Hot-Water Demand
Think about which fixtures may run at the same time, such as two showers, a shower and a dishwasher, or a sink and laundry. Add their expected hot-water flow needs to estimate your peak demand. A product’s advertised maximum GPM is only a starting point; capacity can fall as the required temperature rise increases.
Account for Incoming Water Temperature
The heater must raise water from its incoming temperature to the temperature you want at the tap. Colder incoming water requires a larger temperature rise, which can reduce the flow a heater can deliver. Check local conditions and ask an installer to size the unit for your home rather than relying only on a maximum GPM claim.
Match the Heater to Your Gas Supply
Compare the unit’s BTU rating with the gas supply available at your home. A higher-capacity heater may need changes to gas piping or other parts of the installation. Have a qualified professional verify the gas line and appliance requirements before choosing a model.
Check Venting and Installation Requirements
These picks are described as indoor units, but vent connections and installation details vary. Confirm the required vent type, clearances, electrical connection, and connection sizes for the model you are considering. Indoor gas appliances should be installed according to the manufacturer’s instructions and applicable local requirements.
Compare Controls, Safety Features, and Freeze Protection
Look for controls that make it easy to set and monitor water temperature. Diagnostic displays can help identify operating issues, while features such as flame-failure, overheat, and freeze protection offer added safeguards. Freeze protection does not necessarily remove the need to drain or otherwise protect a heater during extended cold-weather shutdowns.
Understand Efficiency Claims and Maintenance Needs
Uniform Energy Factor (UEF) can help you compare listed efficiency, but it does not predict your exact bill. Household water use, incoming water temperature, installation, and maintenance all affect energy use. Ask about recommended maintenance and the warranty terms, and make sure you can access service for the model you select.
Frequently Asked Questions
How is a gas tankless water heater different from a tank heater?
A tank heater stores and heats a supply of water, while a tankless model heats water as it flows through the unit. Tankless models can save storage space and avoid reheating a full tank, but their flow capacity is limited by the heater’s output and the temperature rise needed.
How many showers can a gas instant water heater run at once?
It depends on the unit’s capacity, the incoming water temperature, and how much water each shower uses. Product descriptions may give an example of simultaneous use, but that does not ensure the same result in every home. Size the heater for your likely peak demand.
What does GPM mean on a tankless water heater?
GPM means gallons per minute, a measure of water flow. A higher advertised GPM can indicate greater capacity, but the figure is tied to operating conditions. Check the temperature rise used for the rating and ask an installer what flow to expect in your home.
Do indoor gas tankless heaters need electricity?
Some models require an electrical connection for controls and other components. For example, the ThermoMate and APUS descriptions list a 120V connection. Check the specific model’s power requirements and make sure a suitable outlet is available.
Can a tankless water heater be installed where an old tank heater was?
It may be possible, but the old setup may not meet the new unit’s gas, venting, electrical, or clearance requirements. Have a qualified installer inspect the existing connections and confirm what changes are needed before ordering a replacement.
Does freeze protection mean the heater cannot freeze?
No. Built-in freeze protection may help protect the unit under certain conditions, but it is not a guarantee against freezing in every situation, especially during an extended outage or shutdown. Follow the manufacturer’s instructions for winter operation and draining.
Final Recommendation
For higher household demand, the GASLAND Gasmart E has the highest stated maximum flow in this group, while the Rheem offers a strong stated flow rating plus LeakGuard features. For a smaller home, the ThermoMate and APUS provide more moderate capacity with detailed controls. The VEVOR may suit some installations, but its supplied specifications do not state a GPM rating, so verify capacity before buying. In every case, choose based on your home’s peak demand, incoming water temperature, and verified installation requirements—not the headline flow figure alone.