If you’re replacing a sliding patio door lock, the best fit depends on measurements and lock style—not simply the number of locking points. The options below are two-point mortise locks for sliding glass doors, but they differ in faceplate length, mounting-hole spacing, handle compatibility, included hardware, and drive style. Measure your existing lock and compare those details before ordering; a multipoint lock is not automatically a universal replacement.
Table of Contents
Quick Comparison
| Product | Key fit details | Notable feature |
|---|---|---|
| ReigaHood 2-Point Mortise Lock | 11-3/4" faceplate; 11" faceplate screw spacing; 3-15/16" handle-set hole spacing | Includes a keeper and screws; anti-slam button |
| Wynn Hardware Dual-Point Mortise Lock | 10-1/8" faceplate; 9-15/16" installation-hole spacing | Separate hook adjustments; screws not included |
| G.A.S Hardware Dual-Point Mortise Lock | 10-1/8" faceplate; 9-15/16" installation-hole spacing | Similar configuration to the Wynn Hardware option |
| TAODICO Square-Drive 2-Point Mortise Lock | 7-13/16" mounting-hole spacing; 4-15/16" handle spacing for compatible applications | Square drive; listed as unavailable in the supplied product data |
| G.A.S Hardware 11-3/4" Multi-Point Mortise Lock | 11-3/4" faceplate; 11" installation-hole spacing | Centered or offset actuator; screws sold separately |
Our Picks: Best Multi Point Locking Door reviews
1. ReigaHood 2-Point Lock with Keeper and Anti-Slam Button
This ReigaHood lock is a two-hook mortise unit for sliding patio doors. Its 11-3/4-inch faceplate and 11-inch faceplate screw spacing make it a candidate for replacing a lock with matching measurements. The hooks are spaced 6-1/2 inches apart, and the listing specifies compatibility with handle sets that use 3-15/16-inch mounting-hole spacing.
An anti-slam button helps keep the hooks from engaging while the door is open. The package description also lists a matching keeper and screw pack, so it includes more of the basic replacement hardware than some options here. The actuator can be centered or offset by 3/4 inch, a detail worth checking against your old lock before buying.
This is a practical choice when your existing lock matches its faceplate, screw, hook, and handle dimensions. It is not a universal fit: a similar-looking lock with different mounting measurements may not line up with the door or handle. The Legacy Series handleset is sold separately.
Pros:
- Includes a matching keeper and screw pack.
- Anti-slam button helps protect extended hooks from accidental engagement.
- Lists centered and 3/4-inch-offset actuator configurations.
Cons:
- Requires a 3-15/16-inch handle-set hole pattern for the listed compatibility.
- Handleset is sold separately.
Verdict: Choose this option if your existing lock matches its 11-3/4-inch faceplate and mounting dimensions, and you want a keeper and screws included.
2. Wynn Hardware Dual-Point Lock with Adjustable Hooks
The Wynn Hardware listing describes a two-point mortise lock for sliding patio and impact doors. Its installation holes are 9-15/16 inches apart, and the faceplate is listed as 10-1/8 inches long. Those measurements differ from the longer 11-3/4-inch options above, so this model may suit a door with a shorter lock assembly.
The lock has an anti-slam button, and its hooks can be adjusted separately to help align the door with the keeper. That adjustment may be useful when the hooks need individual positioning, but it does not remove the need to match the lock to your door and frame. The listing describes use on wood and vinyl sliding doors.
Check the included hardware carefully: the description says the flat double-hole strike has slotted screw holes but that screws are not included. The product information also uses different material descriptions, so confirm the listing details if the lock’s exact material is important to you.
Pros:
- Separate hook adjustments support fine alignment.
- Anti-slam button helps prevent the hooks from engaging when the door is open.
- Shorter 10-1/8-inch faceplate than the 11-3/4-inch options.
Cons:
- Screws are not included, according to the product description.
- Material details in the listing are not fully consistent.
Verdict: Consider this lock when its 9-15/16-inch installation-hole spacing matches your old unit and you want separately adjustable hooks; plan to source screws if needed.
3. G.A.S Hardware Dual-Point Lock for Matching 10-1/8-Inch Faceplates
This G.A.S Hardware lock has the same stated key dimensions and feature set as the Wynn Hardware option: 9-15/16-inch installation-hole spacing, a 10-1/8-inch faceplate, dual hooks, an anti-slam button, and separately adjustable hooks. Its description also identifies it for wood and vinyl sliding doors.
Because the listed specifications closely match the Wynn model, the most useful comparison is the exact product listing and the hardware supplied with it. The description specifies a flat double-hole strike but says screws are not included. It also gives conflicting material references, so do not rely on the product title alone if you need to confirm a specific metal.
Before ordering, compare the old lock’s faceplate length, mounting-hole distance, lock-body depth, and hook positions. Matching only one measurement is not enough to establish fit. This listing is best treated as a replacement candidate for a door with the same overall lock pattern, not as a general upgrade for every sliding patio door.
Pros:
- Dual hooks provide two locking points.
- Separate hook adjustments allow positioning each hook independently.
- Anti-slam button helps reduce accidental hook engagement while open.
Cons:
- Screws are not included, according to the description.
- Its stated dimensions and features closely overlap with another option in this list.
Verdict: This is a reasonable candidate if its 10-1/8-inch faceplate and mounting pattern match your existing lock, but compare the listing and included parts with the Wynn alternative before choosing.
4. TAODICO Square-Drive Lock for Compatible Handle Systems
Unlike the other options here, this TAODICO model uses a 7/32-inch square drive. The listing describes compatibility with certain sliding-door handle systems, including applications with 4-15/16-inch handle-hole spacing. It also names Prime-Line C 1275, C 1277, and E 2000 lock-cylinder applications. These compatibility references make it especially important to check both your handle and lock before ordering.
The dual opposing hooks are spaced 3-3/4 inches apart, with mounting holes 7-13/16 inches apart. A center safety button is intended to help prevent the hooks from engaging while the door is open. The lock is described for compatible wood and vinyl patio doors and is made with die-cast metal and aluminum components.
The supplied product data marks this item as unavailable. Its listed fit details may still help you identify the style of lock you need, but availability can change. Do not substitute it for a different drive style or mounting pattern without confirming compatibility.
Pros:
- Square-drive design is specified for compatible handle systems.
- Lists several lock-cylinder applications and handle compatibility details.
- Center safety button helps prevent hook engagement while the door is open.
Cons:
- Marked unavailable in the supplied product data.
- Its drive style and mounting measurements make it a specialized, non-universal replacement.
Verdict: Consider this lock only if your door uses the specified square-drive setup and its measurements match; check whether it is available before planning a replacement around it.
5. G.A.S Hardware 11-3/4-Inch Lock with Centered or Offset Actuator
This G.A.S Hardware two-point mortise lock is another long-faceplate option. The listing gives an 11-3/4-inch faceplate and installation holes spaced 11 inches apart. It also offers a centered or 3/4-inch-offset actuator, so check your old lock’s actuator position as well as its faceplate and screw spacing.
An anti-slam button helps prevent the double hooks from engaging before the door is closed. The product title identifies a faceplate and keeper, while the description says attaching screws are sold separately. That distinction matters if you expect a complete installation kit: confirm what is included in the selected listing and have suitable screws ready if necessary.
This model shares several fit details with the ReigaHood option, including the 11-3/4-inch faceplate length and 11-inch spacing. Compare the actuator position, keeper, and package contents to choose between them. The ReigaHood description explicitly lists a screw pack; this listing says screws are sold separately.
Pros:
- 11-3/4-inch faceplate with 11-inch installation-hole spacing.
- Centered or 3/4-inch-offset actuator options.
- Anti-slam button helps protect the hooks from accidental engagement.
Cons:
- Attaching screws are sold separately.
- Matching faceplate length alone does not confirm compatibility with your door.
Verdict: Pick this model if your lock uses the 11-inch mounting pattern and the actuator position matches; choose the ReigaHood instead if its listed screw pack and keeper better fit your needs.
How to Choose a Multi-Point Sliding Door Lock
Measure the existing lock before ordering
Remove or inspect the old lock and record its faceplate length, mounting-hole spacing, body thickness, and hook positions. Also note where the actuator sits. Small differences can prevent a replacement from lining up with the door, handle, or frame. Use the product’s stated measurements rather than relying on appearance alone.
Match the handle and drive style
Handle compatibility depends on more than the handle’s shape. Compare the screw-hole spacing and the way the handle connects to the lock. The TAODICO model, for example, specifies a square drive and particular handle applications. Other locks in this list give different handle-hole spacing or actuator details. If you cannot identify your lock style, check the door or handle manufacturer’s parts information before purchasing.
Check the keeper and strike arrangement
The hooks need to meet the keeper correctly when the door closes. Confirm whether your replacement includes a keeper, whether the existing keeper can be reused, and whether it matches the hook layout. A lock can have the right faceplate length but still fail to engage properly if the keeper position or shape differs.
Look for a safety button and hook adjustment
An anti-slam or safety button is designed to help stop hooks from extending while the door is open. Some listings also describe separately adjustable hooks, which can help with alignment. These features do not replace correct installation or fit checks; they are useful details to compare once you have narrowed down compatible models.
Confirm materials and package contents
Product descriptions may differ on the exact material or on what comes in the box. Check the item listing for screws, keeper, faceplate, and any handle components. If a listing says screws are sold separately, plan for that before starting the job. When the material description is inconsistent, contact the seller or consult the manufacturer’s information if the specification matters to you.
Choose a lock made for your door type
These products are described for sliding patio doors, with some listings specifying wood, vinyl, or impact-door use. Confirm that your door’s construction and lock configuration fit the product’s stated application. If the door is a different type or has a proprietary locking mechanism, a two-point sliding-door mortise lock may not be suitable.
Frequently Asked Questions
What is a two-point mortise lock?
It is a lock installed within the edge of a door that uses two locking hooks or points. The products in this guide are designed for compatible sliding patio doors. The exact locking action and fit depend on the lock and door configuration.
Are these locks universal replacements?
No. The products have different faceplate lengths, mounting-hole spacing, hook positions, actuator locations, and handle or drive requirements. Compare your existing lock’s measurements and connection style with the product details before ordering.
How do I measure my existing sliding-door lock?
Measure the faceplate from end to end, the distance between mounting holes, the lock-body thickness, and the spacing and position of the hooks. Record the actuator or handle connection style as well. If possible, compare the removed lock directly with the replacement’s product measurements.
Do these locks include screws and a keeper?
Package contents vary. The ReigaHood description lists a matching keeper and screw pack. The Wynn Hardware description says its strike screws are not included, while the G.A.S Hardware 11-3/4-inch listing says attaching screws are sold separately. Check the specific product listing before ordering.
What does an anti-slam button do?
It helps prevent the hooks from extending while the sliding door is open, reducing the chance of damaging them if the door is shut with the hooks out. The button’s operation can vary by lock, so follow the product instructions during installation and use.
Can I use a two-point lock on any sliding patio door?
No. A two-point lock must match the door’s lock pocket, handle connection, mounting pattern, and keeper. Some models also specify particular door materials or handle systems. Check those requirements before replacing an existing lock.
Final Recommendation
For a long-faceplate replacement, the ReigaHood is a strong starting point when your existing lock matches its 11-inch faceplate screw spacing and 3-15/16-inch handle-set pattern, especially since its description lists a keeper and screw pack. The Wynn Hardware and G.A.S Hardware 10-1/8-inch models are alternatives for a shorter, matching lock pattern, while the TAODICO is a specialized square-drive option with availability marked as unavailable in the supplied data. For any of these choices, exact measurements and connection compatibility should guide your decision.