A raised toilet seat can make sitting down and standing up easier, but the right choice depends on more than added height. For an elongated toilet, check how the riser attaches, whether you need support handles, and how much clearance your bathroom has. Our top picks add 3 to 3.5 inches of height; one standard-height seat is included as a comparison for shoppers who want a replacement rather than a riser.
Table of Contents
Quick Comparison
| Product | Added height | Handles | Best for |
|---|---|---|---|
| Vive Raised Toilet Seat Riser with Handles | 3.5 inches | Removable padded handles | Extra leverage and a riser that fits under the existing seat |
| KOHLER Hyten Elevated Soft-Close Seat | 3 inches | No | A built-in raised seat with a conventional look |
| Carex Elongated Toilet Seat Riser | 3.5 inches | No | A simple riser that uses your existing seat |
| Lunderg Solva Raised Toilet Seat with Handles | 3 inches | Removable handles | A bolted-on raised seat with a home-style appearance |
| KOHLER Broadwood Quiet-Close Seat | None | No | A standard-height elongated seat replacement |
Our Picks: Best Raised Toilet Seat For Elongated Toilets reviews
Vive Raised Toilet Seat Riser: Best Pick with Padded Handles
The Vive adds 3.5 inches of height beneath your existing elongated toilet seat. Its main advantage over a basic riser is the pair of padded handles, which give you a place to grip while lowering yourself or standing up. The handles are removable if you do not need them.
The seat elevator is made from composite material, while the handles are corrosion-resistant aluminum. The listed weight capacity is 300 pounds. Vive says the riser attaches with included screws and washers without tools, and an interior lip helps keep it from slipping. The handle spacing is 19 inches between grips and 22 inches from outer end to outer end, so measure your space before ordering.
This is a practical choice if you want extra height and hand support without replacing your existing seat. Compared with the Kohler Hyten, it adds half an inch more height and includes handles, but it sits beneath the original seat rather than looking like a single integrated seat. Its listed lifetime warranty is another point to consider.
Pros:
- Adds 3.5 inches of height to an elongated toilet seat.
- Includes removable, padded grip handles.
- Designed to install beneath your existing seat.
- Listed capacity of up to 300 pounds and a lifetime warranty.
Cons:
- The handles extend beyond the seat, so check nearby walls and fixtures.
- Its under-seat design is more visible than an integrated raised seat.
Verdict: Choose the Vive if you want a 3.5-inch lift with removable handles and your bathroom has room for the wider grip area.
KOHLER Hyten Elevated Seat: Best Integrated Design
The Hyten is a full elongated replacement seat with a raised seating surface, rather than a separate riser placed beneath your current seat. It adds 3 inches of height and has a contoured seat and lid designed to resemble a conventional toilet seat. That integrated style may suit a bathroom where you would rather avoid the look of a separate elevator.
Its quiet-close lid and seat are designed to lower gently, while Grip-Tight hardware fastens from above the bowl. The quick-release feature lets you remove the seat for cleaning. The product is made to fit most elongated toilets, but checking your toilet shape and mounting arrangement before purchase is still wise.
Unlike the Vive and Lunderg, the Hyten does not include support handles. Its 3-inch lift is also slightly lower than the 3.5-inch height offered by Vive and Carex. The listed color for this model is Biscuit, so confirm the finish you need before choosing it.
Pros:
- Integrated raised-seat design adds 3 inches without a separate riser.
- Quiet-close seat and lid help prevent slamming.
- Quick-release design supports easier cleaning.
- Installation hardware is designed to fasten from above the bowl.
Cons:
- Does not have handles for extra support.
- Provides less added height than the 3.5-inch options.
Verdict: The Hyten is a strong fit if you want a raised elongated seat with a more conventional appearance and do not need grab handles.
Carex Elongated Riser: Best Simple 3.5-Inch Lift
The Carex is a straightforward riser that installs beneath your existing elongated toilet seat and adds 3.5 inches of height. It is designed for people who want a higher sitting position but do not need handles attached to the seat. The product information says it fits most elongated toilets and supports users weighing up to 300 pounds.
Carex describes installation as a three-step process that takes a minute or two. Since the riser works with your current seat, you can keep the seat you already use rather than replacing it with a complete raised-seat unit. For cleaning, the manufacturer advises against abrasive cleaners and cloths.
The trade-off is its simpler design: there are no built-in handles, and the supplied information does not describe a soft-close lid or quick-release cleaning feature. If you want a more supportive setup, the Vive or Lunderg includes handles. If you want a complete raised seat, the Kohler Hyten is a different style of solution.
Pros:
- Adds 3.5 inches of height beneath an existing elongated seat.
- Designed to fit most elongated toilet bowls.
- Three-step installation is described as quick.
- Listed for users weighing up to 300 pounds.
Cons:
- Does not include handles for support.
- Abrasive cleaners and cloths should be avoided.
Verdict: Pick the Carex if you want a basic 3.5-inch lift under your existing seat and do not need attached handles.
Lunderg Solva Raised Seat: Best Bolted-On Option with Handles
The Lunderg Solva is made specifically for elongated toilets and adds 3 inches of height. It attaches directly to the toilet with bolts, rather than resting on the floor or relying on a separate locking mechanism. The seat has a soft-close lid and seat, and a quick-release hinge for removal when you need to clean around it.
Its removable handles have a wood finish, with included covers or cartridges for a more discreet look when the handles are not needed. The listed space between the handles is 21 inches, and the seat supports up to 300 pounds. Lunderg says you need at least 8 inches of unobstructed clearance on each side, measured from the outer edge of the bowl. Check the door swing, cabinets, and nearby walls before buying.
This design combines a raised seat and handles in one unit, unlike the Vive, which fits beneath your existing seat. The Solva adds half an inch less height than the Vive and Carex. Its specified side clearance is especially important in smaller bathrooms, so it may not be the best match where space beside the bowl is tight.
Pros:
- Adds 3 inches and bolts directly to an elongated toilet.
- Includes removable handles and covers for a less conspicuous look.
- Soft-close seat and lid, plus a quick-release hinge.
- Listed capacity of up to 300 pounds.
Cons:
- Requires at least 8 inches of clear space on each side of the bowl.
- Adds less height than the 3.5-inch Vive and Carex risers.
Verdict: Choose the Solva if you want a bolted-on raised seat with removable handles and have enough side clearance for its wider design.
KOHLER Broadwood Seat: Standard-Height Alternative, Not a Riser
The Broadwood is a standard-height elongated replacement seat, not a raised toilet seat. It does not add height, so it will not meet the main need of shoppers looking for a riser. It is included here as a useful comparison if you are replacing a worn seat but do not need help sitting down or standing up.
This model has a quiet-close lid and seat, a single hinge cover that lifts away for cleaning, and compression-molded wood construction. It is designed to fit most elongated one- or two-piece toilets. The listed finish is white, and the seat has a standard replacement-seat design rather than an elevated profile.
Unlike the Hyten, the Broadwood does not provide a 3-inch lift. It also has no handles. Its main appeal is its quiet-close feature and removable hinge cover, not mobility support. If you need added height, choose one of the raised options above instead.
Pros:
- Quiet-close seat and lid.
- Hinge cover lifts away for easier cleaning.
- Designed for most elongated one- or two-piece toilets.
Cons:
- Does not raise the seating height.
- Does not include support handles.
Verdict: Consider the Broadwood only if you want a standard-height elongated seat replacement; it is not a substitute for a raised seat.
How to Choose a Raised Toilet Seat for an Elongated Toilet
Confirm Your Toilet Shape and Measure First
These picks are made for elongated toilets, but fit can still depend on your bowl and mounting setup. Check the toilet shape and the product’s fit details before ordering. For a handle-equipped model, also measure the open space beside the bowl and consider nearby walls, cabinets, and the bathroom door.
Choose the Amount of Added Height
The options here add either 3 or 3.5 inches. A half-inch difference can affect how easily you can sit and stand, so consider your needs and, if relevant, guidance from your care team. The Broadwood is a standard-height seat and does not add lift.
Decide Whether You Need Handles
Handles provide a place to grip when sitting or standing, but they take up space around the toilet. The Vive and Lunderg have removable handles; the Carex and Kohler Hyten do not. Compare the handle spacing with your available room and the support you need.
Compare How Each Seat Attaches
The Vive and Carex risers fit beneath your existing toilet seat. The Hyten replaces your current seat with an elevated model, while the Lunderg bolts directly to the toilet as a raised seat with handles. Consider whether you prefer to keep your current seat or install a complete replacement, and follow the product’s installation instructions.
Check Capacity and Cleaning Details
The Vive, Carex, and Lunderg product information lists a 300-pound capacity. Check the limit and fit for any product you are considering, and do not assume the same rating applies to every model. Cleaning features also differ: the Hyten has a quick-release design, and the Lunderg has a quick-release hinge. Carex advises avoiding abrasive cleaners and cloths.
Consider Appearance and Bathroom Space
An integrated seat such as the Hyten may look more like a conventional toilet seat than a riser beneath an existing seat. The Lunderg offers removable handles and covers, but its specified side clearance makes measuring especially important. Choose a design that fits both the toilet and the way you use the room.
Frequently Asked Questions
Do these raised toilet seats fit elongated toilets?
The Vive, KOHLER Hyten, Carex, and Lunderg options are described as fitting elongated toilets. The Broadwood is also an elongated seat, but it is a standard-height replacement, not a riser. Check the product’s fit information and your toilet before ordering.
Which option adds the most height?
The Vive and Carex add 3.5 inches. The KOHLER Hyten and Lunderg add 3 inches. The KOHLER Broadwood does not add height.
Which picks have handles?
The Vive and Lunderg include handles. Both describe their handles as removable. The Carex and both Kohler seats do not include handles.
Can I keep my existing toilet seat?
The Vive and Carex risers are designed to fit beneath your existing seat. The Hyten and Lunderg are raised-seat replacements that attach to the toilet. The Broadwood is a standard-height replacement seat.
Which options list a 300-pound capacity?
The supplied product information lists a capacity of up to 300 pounds for the Vive, Carex, and Lunderg. Check the product details for the model you choose and make sure it suits your needs.
Is the KOHLER Broadwood a raised toilet seat?
No. It is a standard-height elongated toilet seat with a quiet-close lid and seat. If you need added height, choose one of the raised-seat or riser options instead.
Final Recommendation
For most shoppers who want both added height and hand support, the Vive is the most versatile pick: it adds 3.5 inches, has removable padded handles, and fits beneath an existing elongated seat. Choose the Carex for a simpler 3.5-inch riser without handles, the Kohler Hyten for an integrated raised-seat design, or the Lunderg if you want a bolted-on seat with removable handles and have the required side clearance. The Broadwood is only for standard-height seat replacement.
