Anti-mould paint additives are mixed into paint to help painted surfaces resist mold and mildew. The right choice depends on what type of paint you plan to use, how much paint you need to treat, and whether you also want protection for grout. These additives are not a fix for existing mold or ongoing moisture problems, so address leaks and dampness before repainting.
Table of Contents
Quick Comparison
| Product | Paint compatibility | Treatment details | Availability in supplied data |
|---|---|---|---|
| Paint-Guard Mold and Mildew Defense Paint Additive | Water-based paint | Package is described as a 2-gallon treatment | Available |
| Paint-Guard and Grout-Guard Mold Defense Additive | Latex or water-based paint; wet grout | Paint and grout protection in one kit | Unavailable |
| MICROBAN Fungicidal Paint Additive | Latex, water-based, and oil-based paint or stain | 1.5 ounces treats 1 gallon | Unavailable |
Availability can change, so check each product listing before planning your project.
Our Picks: Best Anti Mould Paint Additive reviews
1. Paint-Guard: A Straightforward Additive for Water-Based Paint
Paint-Guard is designed to be mixed into water-based paint to help defend the finished surface against mold and mildew. Its main advantage is a simple use case: add the treatment to paint rather than applying a separate coating after painting.
The package is described as treating 2 gallons of paint. That makes it a useful size to consider for a room or other project that needs more than one gallon. The supplied product details do not state a precise mixing ratio or list specific paint brands, so check the container instructions and confirm that your paint is compatible before mixing.
Compared with the other options here, Paint-Guard has a narrower stated paint compatibility than MICROBAN, which lists both oil- and water-based products. It also does not include a grout treatment. Its supplied listing is marked available, while the other two listings are marked unavailable in the provided data.
Pros:
- Made to mix into water-based paint
- Package is described as treating 2 gallons
- No separate post-paint coating is described
Cons:
- Supplied details do not specify compatibility with oil-based paint
- Does not include a grout additive
Verdict: Choose Paint-Guard if you want an available, paint-only additive for a water-based paint project and its package treatment amount suits your needs.
2. Paint-Guard and Grout-Guard: A Two-Surface Bathroom Kit
This kit is designed to add mold and mildew defense to two different surfaces: painted walls and grout. Paint-Guard mixes into latex or water-based paint, while Grout-Guard is added to wet grout before the grout is applied. The product description says the additives become part of each finish, so there is no extra coating step afterward.
That combined approach may be convenient for a bathroom, kitchen, or laundry-room project where you are repainting and regrouting. It is also distinct from the other picks: Paint-Guard alone is for paint, and MICROBAN is described as a paint or stain additive, not a grout treatment.
The supplied product data marks this listing unavailable. If it is not offered when you shop, you will need to find separate products for paint and grout rather than assuming another paint additive can be used in grout. Follow the package directions for each material and do not mix products together unless their instructions say to do so.
Pros:
- Designed for both painted surfaces and grout
- Paint additive is listed for latex or water-based paint
- Grout additive is mixed into wet grout before application
- Designed to avoid a separate coating step
Cons:
- Supplied product data marks it unavailable
- Does not list oil-based paint compatibility
Verdict: This is the most relevant option if you need both paint and grout treatment, but its supplied availability status makes it a less dependable choice to plan around.
3. MICROBAN: A Measured Additive for Paint or Stain
MICROBAN is a clear liquid additive described for use in latex, water-based, and oil-based paint or stain. The supplied details give a specific treatment amount: 1.5 ounces for 1 gallon. That clear ratio can help with measuring, though you should still follow the package instructions for the product and paint you are using.
The description says the formula has a thin viscosity and mixes into paint without separation. It is intended to help painted surfaces resist mildew-related deterioration, including in damp rooms such as kitchens, laundry rooms, and bathrooms. This wider stated compatibility makes it more flexible than Paint-Guard if your project uses oil-based paint or stain.
The supplied listing is marked unavailable, so check whether it can be purchased before choosing it for a planned job. The product is described for paint and stain; it is not presented as a grout additive. Its claim to resist mold and mildew should also be understood as surface protection, not a way to remove existing growth or correct damp conditions.
Pros:
- Listed for latex, water-based, and oil-based paint or stain
- Specific 1.5-ounce treatment amount for 1 gallon
- Described as a clear, thin liquid that mixes into paint
- Intended for damp areas prone to mold and mildew
Cons:
- Supplied product data marks it unavailable
- Does not include a grout treatment
Verdict: MICROBAN is the most flexible choice by stated paint compatibility and dosing, provided the listing is available and your paint or stain matches the label directions.
How to Choose an Anti-Mould Paint Additive
Match the additive to your paint
Check whether the product is made for latex, water-based, oil-based, or other paint. Paint-Guard is described for water-based paint, while MICROBAN is listed for water-based, latex, and oil-based paint or stain. Do not assume an additive works with every coating; confirm compatibility on its label before mixing.
Check the treatment amount
Compare the amount of additive with the volume of paint you plan to use. Paint-Guard is described as a 2-gallon treatment, while MICROBAN lists 1.5 ounces per gallon. Measure carefully and follow the package directions rather than estimating, since the supplied descriptions do not provide every mixing detail.
Decide whether you need grout protection
A paint additive protects only the painted surface it is intended for. If your project also includes fresh grout, the Paint-Guard and Grout-Guard kit is the only option here described for both materials. Grout-Guard is mixed into wet grout before application, so it is not a treatment to add after the grout has set.
Address moisture before painting
An additive does not repair leaks, improve ventilation, or remove existing mold. Find and address the source of dampness, and clean or remediate existing growth as appropriate before repainting. Otherwise, the conditions that caused the problem may remain even after the paint is treated.
Read the label and plan safe application
Check the product instructions for mixing, paint compatibility, application, and any safety steps. Use the additive only in the way its label allows, and follow the paint maker’s directions as well. If you are unsure whether two products can be combined, contact the manufacturer before mixing them.
Frequently Asked Questions
What does an anti-mould paint additive do?
It is mixed into paint to help the finished painted surface resist mold and mildew. It does not replace moisture control or remove existing growth.
Can I use these additives in any type of paint?
No. Compatibility depends on the product. Paint-Guard is described for water-based paint, while MICROBAN is listed for latex, water-based, and oil-based paint or stain. Check the specific label before use.
Can I add a paint additive to grout?
Only use a product specifically described for grout. The Paint-Guard and Grout-Guard kit includes a grout additive intended to be mixed into wet grout before application.
Will an additive stop mold caused by a leak?
No additive can fix a leak or remove the moisture source. Repair water problems and address existing mold before painting; otherwise, damp conditions may persist behind or around the painted surface.
How much MICROBAN is listed for one gallon of paint?
The supplied product description says 1.5 ounces treats 1 gallon. Follow the product label for the exact mixing and use directions.
Which option is best for a project using oil-based paint?
MICROBAN is the only option in this comparison explicitly described for oil-based paint or stain. Confirm that your exact coating is compatible and check the listing’s availability before choosing it.
Final Recommendation
For a straightforward water-based paint project, Paint-Guard is the practical first option in this comparison, and its supplied listing is marked available. If you need one product set for painted walls and grout, consider Paint-Guard and Grout-Guard, but its supplied listing is marked unavailable. MICROBAN has the broadest stated paint compatibility and a clear treatment amount, though its listing is also marked unavailable in the supplied data. In every case, solve moisture problems first and follow the product label closely.