Choosing the best commercial tankless water heater starts with matching its fuel type and hot-water output to your building’s demand. A restaurant, salon, or small business may need several fixtures running at once, while an electric unit can make sense where gas is unavailable and the electrical service can support it. The three options below range from high-capacity gas systems to a compact electric model, so check the installation requirements before you buy.
Table of Contents
Quick Comparison
| Product | Fuel and installation | Listed output | Standout feature |
|---|---|---|---|
| Rinnai CX199iN SENSEI CX | Natural gas or propane; indoor or outdoor | Up to 11.1 GPM | Condensing design and flexible installation |
| Rinnai CU160iN | Natural gas; indoor | 9 GPM | Circ-Logic recirculation support |
| VEVOR 36kW Electric Tankless Water Heater | Electric; 240V | Not stated in the supplied product details | Digital temperature controls |
Our Picks: Best Commercial Tankless Water Heater reviews
Rinnai CX199iN SENSEI CX: Best for Flexible, High-Demand Installations
The Rinnai CX199iN is a condensing gas tankless heater built for commercial use. Its Smart Sense gas control system supports natural gas or propane, and the Versa Vent design allows indoor or outdoor installation. That combination gives businesses more flexibility than a unit limited to one fuel or installation location.
Rinnai lists output of up to 11.1 GPM, with capacity for as many as seven fixtures at once under suitable conditions. Actual output depends on your building’s demand and water temperature requirements, so have a qualified installer check the sizing before you choose it. The heater also has a UEF of .98 and a Quick Flush feature intended to simplify flushing.
At a compact, suitcase-like size, it may suit a business that needs substantial hot-water capacity without a large storage tank. Wi-Fi control requires a separate Controlr module, and an RX-OVC vent cap is required for outdoor installation. Professional installation is recommended; gas, venting, and site requirements should be confirmed before purchase.
Pros:
- Supports natural gas and propane through Smart Sense controls
- Can be installed indoors or outdoors with the required components
- Listed output of up to 11.1 GPM
- Quick Flush feature and UEF .98
Cons:
- Outdoor installation requires a separate RX-OVC vent cap
- Wi-Fi control requires a separate module
Verdict: Choose the CX199iN if you want the highest listed flow rate here, fuel flexibility, and indoor-or-outdoor installation options, provided a professional confirms it fits your site and demand.
Rinnai CU160iN: Best for Indoor Natural-Gas Installations
The Rinnai CU160iN is an indoor, natural-gas condensing tankless water heater with a listed flow rate of 9 GPM. It is a more focused choice than the CX199iN: it does not offer the same stated fuel flexibility or outdoor installation option, but its capacity may be suitable for a business with a more moderate hot-water load.
Its Circ-Logic technology can coordinate recirculation patterns with typical usage, while Wi-Fi monitoring is listed as a feature for on-demand hot water. These functions may be useful when reducing wait time is important, but the installation and system setup still need to match the building’s plumbing and operating needs.
The CU160iN is a practical candidate if your site already uses natural gas and the heater will be installed indoors. It has a lower listed flow rate than the CX199iN, so it may be a less suitable fit for several high-demand fixtures operating together. Rinnai recommends professional installation. The stated commercial warranty is eight years on the heat exchanger, five years on parts, and one year on labor.
Pros:
- Listed 9 GPM output for commercial hot-water demand
- Circ-Logic supports recirculation patterns
- Wi-Fi monitoring is included among its listed features
- Commercial warranty coverage is specified for the heat exchanger, parts, and labor
Cons:
- Designed for indoor installation and natural gas
- Lower listed flow rate than the CX199iN
Verdict: The CU160iN is a sensible choice for an indoor, natural-gas setup with demand that fits its 9 GPM rating; consider the CX199iN if you need more listed capacity or broader installation options.
VEVOR 36kW Electric Tankless Heater: Best for Compatible Electric Systems
The VEVOR is a 36kW, 240V electric tankless water heater with a digital touch screen and temperature controls. Unlike the two Rinnai models, it does not use gas, and its product details do not provide a GPM rating. That makes it harder to compare its output directly with the gas units, so you should confirm its expected performance for your incoming water temperature and fixture demand before buying.
The supplied specifications call for four 40A circuit breakers and four pieces of 8AWG wire, along with a 3/4-inch NPT inlet and outlet. Those are substantial electrical requirements to verify with an electrician against your building’s service and local code. The heater also lists over-temperature protection and a security lock on its touch screen.
VEVOR describes the unit for residential and commercial use, including tasks such as hand washing and hair washing. Its suitability for a particular business depends on the required flow and available electrical capacity. It may be a more practical fit for a smaller or specific point of use than for a large commercial site with several simultaneous hot-water demands.
Pros:
- Uses electricity rather than natural gas or propane
- Digital touch screen displays temperature and heating functions
- Lists constant temperature control and over-temperature protection
- Includes a security lock feature
Cons:
- Product details do not state a flow rate for capacity comparison
- Requires careful electrical-service and installation checks
Verdict: Consider the VEVOR if your electrical system can support its specified requirements and its verified output meets your business’s needs; for higher or clearly quantified demand, the Rinnai gas models offer more stated capacity information.
How to Choose a Commercial Tankless Water Heater
Estimate Your Peak Hot-Water Demand
Start by listing the fixtures and equipment that may use hot water at the same time. A business with several sinks, showers, or wash stations has different needs from one that uses hot water at only a few points. Compare your estimated peak demand with the heater’s stated flow rate, and ask an installer to account for the temperature rise your site requires. A listed GPM figure is not a guarantee that every building will get that flow at every temperature.
Match the Fuel to Your Building
Check whether natural gas, propane, or an appropriate electrical supply is available where the heater will be installed. The CX199iN supports natural gas or propane; the CU160iN is listed for natural gas; and the VEVOR is a 240V electric model. Fuel choice affects installation planning, so confirm the required connections and capacity with a qualified professional before ordering.
Check Electrical Capacity for Electric Models
For the VEVOR, the supplied product details call for four 40A circuit breakers and four pieces of 8AWG wire. Ask an electrician to verify that your building’s electrical service, wiring plan, and local requirements can support the unit. Do not assume that a standard outlet or existing circuit will be sufficient.
Plan the Location and Venting
Decide whether the heater will be installed indoors or outdoors, then confirm the model’s approved installation options and required accessories. The CX199iN supports either location, but its outdoor installation requires an RX-OVC vent cap. The CU160iN is specified for indoor installation. A qualified installer can assess clearances, venting, and other site conditions for the model you choose.
Consider Recirculation and Controls
If hot water has to travel a long distance to a fixture, ask whether recirculation is useful for your layout and how it will be set up. The CU160iN lists Circ-Logic technology for recirculation patterns. The CX199iN offers Wi-Fi control only with a separate Controlr module, while the CU160iN lists Wi-Fi monitoring. Compare the controls you need with what is included and what may require additional equipment.
Review Maintenance and Warranty Details
Ask the installer what routine service the heater and your water conditions may require, and how easily the unit can be accessed for maintenance. The CX199iN lists a Quick Flush feature. Compare warranty terms as well: the CX199iN specifies eight years or 12,000 hours on the heat exchanger, five years on parts, and one year on labor; the CU160iN lists eight years on the heat exchanger, five years on parts, and one year on labor. The supplied VEVOR details do not state warranty coverage.
Confirm Commercial Suitability and Local Requirements
Commercial use can involve longer operating hours and different installation rules than a typical home setup. Confirm that the selected model, its capacity, and the proposed installation meet your business needs and local code. Rinnai recommends professional installation for its models, and the VEVOR’s electrical requirements also call for careful installation planning.
Frequently Asked Questions
Which product has the highest listed flow rate?
The Rinnai CX199iN has the highest listed flow rate of these three products, at up to 11.1 GPM. The CU160iN is listed at 9 GPM. The VEVOR product details do not provide a GPM figure.
Can the Rinnai CX199iN run on propane?
Yes. The CX199iN’s Smart Sense gas control system supports natural gas or propane. Confirm the fuel setup and installation requirements with a qualified technician.
Can the CX199iN be installed outdoors?
It supports indoor or outdoor installation. The product details specify that an RX-OVC vent cap is required for outdoor installation.
Does the Rinnai CU160iN support propane?
The supplied product information describes the CU160iN as a natural-gas model. If your site uses propane, check with Rinnai or a qualified installer about an appropriate model rather than assuming this unit supports it.
Is the VEVOR electric heater suitable for every commercial building?
No. Its suitability depends on your hot-water demand and whether the building can meet its stated 240V electrical requirements. The product details specify four 40A circuit breakers and four pieces of 8AWG wire, so have an electrician check compatibility before purchase.
Do these heaters need professional installation?
Rinnai recommends professional installation for both of its models. For the VEVOR, the listed electrical requirements make it important to have a qualified professional verify the installation and local code requirements.
Final Recommendation
For businesses that need high stated output and want natural-gas or propane flexibility, the Rinnai CX199iN is the strongest all-around choice in this group. The Rinnai CU160iN is a good alternative for an indoor natural-gas installation with demand that fits its 9 GPM rating. Choose the VEVOR only after confirming that its electrical requirements and verified hot-water output suit your site.