Product reviewRoofing & Exterior

Best Exterior Basement Waterproofing Material: Top Picks Compared

Updated 11 min read

Reader-supported: when you buy through links on our site, we may earn an affiliate commission at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases. Learn more.

Choosing the best exterior basement waterproofing material depends on where water is getting in and what your foundation is made of. Exterior products range from flexible liquid coatings to peel-and-stick membranes and penetrating sealers, but they are not interchangeable. For serious leaks, water pressure, or recurring basement flooding, a coating alone may not solve the problem; proper drainage and foundation repairs may also be needed.

These five options cover different jobs. Ames Blue Max is a flexible liquid membrane intended for above- and below-grade use, while the Yunlake roll offers a peel-and-stick asphalt barrier. The KILZ product is a masonry paint for prepared surfaces, and the sealers and polymer membrane suit more specific applications. Check the product instructions and confirm compatibility with your foundation before buying.

Quick Comparison

ProductTypeBest suited forKey consideration
KILZ Basement and Masonry Waterproofing PaintMasonry waterproofing paintPrepared concrete, brick, and block wallsNot for active leaks; fill cracks and holes before below-grade use
AMES Blue Max Liquid Rubber WaterprooferLiquid rubber membraneFlexible coating for suitable above- or below-grade surfacesNeeds a top coat where exposed to sunlight
Yunlake Self-Adhesive Rubberized Asphalt MembranePeel-and-stick membraneFoundation surfaces and other compatible building substratesSurface preparation and correct installation are essential
GOODTAKE Concrete and Masonry Waterproofing SealerPenetrating sealerPorous concrete and masonry where a breathable treatment is appropriateConfirm suitability for your specific foundation and water problem
Polymer Self-Adhesive Waterproof MembraneFlexible sheet membraneTile and other listed membrane applicationsNot clearly presented as a dedicated exterior foundation product

Our Picks: Best Exterior Basement Waterproofing Material reviews

1. KILZ Basement and Masonry Waterproofing Paint — Best for Prepared Masonry Walls

KILZ is a white waterproofing paint for concrete, brick, cinder block, stucco, and other masonry surfaces. The product description says its coating is designed to block water pressure up to 12 PSI. That makes it a possible choice for prepared masonry, but it should not be treated as a fix for an active leak or a substitute for exterior drainage work.

For below-grade use, the supplied instructions call for filling holes and cracks with hydraulic cement before painting. The finish is also described as alkali resistant, and the formula is intended for interior or exterior use. It dries to the touch in about an hour, but the listed cure time is longer, so plan the job around the full instructions rather than relying on the surface-dry time alone.

This is the most straightforward option here if you want a coating that can also provide a finished white surface. Compared with a rubber membrane or a peel-and-stick roll, paint is easier to apply to an accessible wall, but it does not provide the same sheet-like barrier. You will need sound, properly prepared masonry and a dry surface suitable for coating.

Pros:

  • Made for concrete, brick, cinder block, and other masonry surfaces
  • Listed for both interior and exterior use
  • Provides a white finish as well as a water-resistant coating
  • Low-odor formula with a stated one-hour touch-dry time

Cons:

  • Not intended for floors or walls with active water leaks
  • Cracks and holes need repair before below-grade application

Verdict: Choose KILZ for prepared masonry where you want a paint-like coating, but look to a membrane system or professional drainage work for persistent exterior water intrusion.

2. AMES Blue Max Liquid Rubber — Best Flexible Liquid Membrane

AMES Blue Max is a blue, elastomeric liquid coating described for above- and below-grade waterproofing, including basements and foundations. It can be brushed, rolled, or sprayed onto suitable vertical or horizontal surfaces. The listing also identifies concrete, wood, and metal as possible substrates, so check the full instructions for your exact application.

Its main distinction is flexibility: the product description states 1,200% elongation and says the coating is designed to expand and contract with the surface to resist cracking and peeling. That makes it a different kind of option from rigid masonry paint. It is also described as a primer for some roof applications, though that does not mean every roof or foundation assembly is compatible.

One important limitation is sun exposure. The coating is UV sensitive and requires a top coat when exposed to sunlight in exterior applications. That makes it important to plan the full protective system, rather than leaving the blue coating exposed. Its liquid form can be useful for covering irregular surfaces, but getting a consistent layer still depends on careful surface preparation and application.

Pros:

  • Listed for above- and below-grade waterproofing applications
  • Flexible elastomeric coating designed to move with the surface
  • Can be brushed, rolled, or sprayed
  • Described for use on concrete, wood, and metal

Cons:

  • Requires a top coat when exposed to sunlight
  • Application and compatibility need to be checked for the specific substrate

Verdict: Blue Max is a strong option to consider when you want a flexible liquid membrane for a suitable foundation surface and can follow its top-coat and installation requirements.

3. Yunlake Rubberized Asphalt Membrane — Best Peel-and-Stick Foundation Barrier

This roll combines a rubberized asphalt waterproofing layer with a PET surface film and a removable release liner. It is designed to stick to suitable prepared substrates after you peel away the liner and press the membrane into place. The listing names concrete foundation surfaces and basement walls among its possible uses, along with other building applications.

A sheet membrane can create a continuous barrier across a wall, but the finished result depends on careful placement and attention to edges, seams, corners, and penetrations. The product description gives the roll dimensions as 40 inches wide by 33 feet long. Before ordering, measure the area and check the installation requirements for the wall and any finish or protection layer that will go over it.

Compared with a liquid coating, this roll may be easier to handle across broad, relatively even areas, but it is less forgiving around complex shapes. It is not a cure for water problems caused by poor grading, clogged drains, or other sources that need to be corrected separately. Treat the product as one part of a properly planned waterproofing assembly.

Pros:

  • Peel-and-stick backing avoids a separate adhesive application for the membrane
  • Rubberized asphalt layer is intended to form a water barrier
  • Roll format can cover larger wall areas with fewer separate pieces
  • Listing includes concrete foundations and basement walls as applications

Cons:

  • Careful surface preparation and seam placement are needed
  • Less convenient than a brush-on coating around irregular details

Verdict: Consider the Yunlake roll for a compatible, accessible foundation wall where you can prepare the surface and install a sheet barrier carefully.

4. GOODTAKE Concrete and Masonry Sealer — Best Penetrating Treatment

GOODTAKE is described as a silicon-based, water-based sealer that penetrates concrete and masonry pores to create a breathable water-repellent barrier. Unlike a paint or sheet membrane, a penetrating sealer is intended to work within the surface rather than form a visible film over it. The listing says it can be applied with a brush, roller, or sprayer.

The product description also highlights freeze-thaw resistance and protection against chloride-related corrosion. Those claims may matter for certain concrete surfaces, but they do not establish that the product can handle every type of basement leak or hydrostatic pressure. Check the label for the type of water exposure and substrate it supports, especially if you plan to apply it below grade.

This option may suit a homeowner seeking a low-odor, ready-to-use treatment for porous masonry. It is not the closest match to a thick exterior membrane, and its invisible finish will not cover cracks or repair damaged concrete. Compare it with Blue Max or the Yunlake membrane if you need a more distinct coating or sheet barrier.

Pros:

  • Designed to penetrate porous concrete and masonry
  • Described as breathable and water repellent
  • Can be applied by brush, roller, or sprayer
  • Listing describes a VOC-free, non-toxic formula

Cons:

  • Does not function like a crack-filling membrane or surface coating
  • Confirm its suitability for below-grade water pressure before use

Verdict: GOODTAKE is worth considering for surface water repellency on compatible porous masonry, but choose a dedicated membrane or repair system for active foundation leaks.

5. Polymer Self-Adhesive Waterproof Membrane — Best for Tile-Related Projects

This flexible sheet product is made from high-density polyethylene and non-woven polypropylene, according to the listing. It is intended to work as a waterproof underlayment with tile and is described for floors and walls in spaces such as showers, kitchens, and pools. Its flexible construction can be cut and shaped to fit an installation.

Although the listing mentions basements, it focuses heavily on tile underlayment and interior wet areas. It is not clearly presented as a dedicated exterior foundation membrane, so verify that the product is approved for below-grade exterior use before buying it for that job. Installation is also described as involving placement on a mortar bed, which differs from the peel-and-stick method used by the Yunlake asphalt roll.

This membrane may make more sense for a basement bathroom or tiled area than for waterproofing the outside of a foundation. Its broad application list should not replace checking the assembly requirements for your specific project, including how seams, corners, and transitions are sealed.

Pros:

  • Flexible sheet can be cut to fit an installation
  • Designed for use with tile and listed wet-area applications
  • Three-layer construction is described as helping resist water penetration
  • Useful for projects involving cement, ceramic, or stone finishes

Cons:

  • Listing does not clearly establish it as an exterior foundation product
  • Installation method differs from a simple peel-and-stick membrane

Verdict: Choose this membrane for a compatible tile or wet-area project; for exterior basement walls, confirm the manufacturer’s intended use before relying on it.

How to Choose Exterior Basement Waterproofing Material

Match the material to the water problem

First work out whether you are dealing with damp masonry, water entering through cracks, or water collecting around the foundation. A sealer may help repel moisture at a porous surface, while a membrane is intended to create a more continuous barrier. Neither approach fixes every source of water. If water is actively entering or pressure is building against the foundation, you may need repairs or drainage work in addition to a coating.

Check that the product is meant for below-grade use

A product labeled for exterior use is not automatically suitable for the buried exterior side of a basement wall. Look for clear instructions for above- or below-grade foundation use, and confirm the allowed substrate and conditions. Among these picks, Blue Max is specifically described for above- and below-grade applications; the other products have different stated uses and limitations.

Choose between liquid coatings and sheet membranes

Liquid products such as Blue Max can be applied over surfaces with curves or details, but coverage depends on applying the coating as directed. Sheet products can create a distinct barrier across broad areas, but seams, edges, and corners need careful handling. Think about access to the wall, the number of penetrations, and whether you can install the material without gaps.

Prepare the foundation before applying anything

Remove loose material and follow the manufacturer’s surface-preparation directions. Repair cracks and holes with a compatible material before coating; the KILZ instructions specifically call for hydraulic cement for holes and cracks before below-grade application. Do not apply a product over active leaks unless its instructions say it is designed for that condition.

Plan for drainage and protection layers

Exterior waterproofing is often part of a system rather than a standalone coating. Consider how water will move away from the foundation and whether the membrane needs protection from backfill or other materials. Follow the product instructions for top coats, coverings, and installation details. Blue Max, for example, is described as UV sensitive and needs a top coat if exposed to sunlight.

Confirm coverage and application requirements

Estimate the wall area before buying, then compare the product’s coverage instructions with your measurements. Check whether the material is brushed, rolled, sprayed, or installed as a sheet, and make sure you have the tools and conditions needed for the job. Allow for surface preparation, seams, corners, and drying or curing time when planning the work.

Frequently Asked Questions

What type of material is best for exterior basement waterproofing?

There is no single best material for every foundation. A flexible liquid membrane or a properly installed sheet membrane may suit exterior below-grade work, while a penetrating sealer or masonry paint has different uses. Match the product to the surface, water conditions, and installation plan.

Can waterproofing paint stop an active basement leak?

Do not assume it can. The KILZ description specifically says it is not for walls with active water leaks. Find and address the source of the water, and repair cracks or openings before applying a coating according to its instructions.

Is a penetrating sealer the same as a waterproof membrane?

No. A penetrating sealer is designed to enter pores in the material and repel water, while a membrane forms a distinct barrier on or over a surface. A sealer should not be treated as a replacement for a membrane when the project calls for a continuous exterior barrier.

Can I use a peel-and-stick membrane on an exterior foundation?

Only if the product is approved for that use and the foundation surface meets its requirements. The Yunlake listing names concrete foundation surfaces and basement walls, but correct preparation, placement, and seam treatment still matter.

Does exterior waterproofing eliminate the need for drainage?

Not necessarily. Waterproofing material and drainage address different parts of water management. Water still needs a suitable path away from the foundation, and persistent water problems may call for a drainage solution or professional assessment.

Can I use the polymer membrane for an exterior basement wall?

The listing focuses on tile underlayment and wet-area applications, and does not clearly establish it as a dedicated exterior foundation product. Confirm the intended use with the manufacturer before using it below grade.

Final Recommendation

For a flexible coating specifically described for above- and below-grade use, AMES Blue Max is the most direct match in this group, provided you follow its application requirements and protect it from sunlight with a top coat where needed. The Yunlake roll is another option for a compatible foundation surface if you prefer a sheet barrier and can install it carefully. Use KILZ for prepared masonry, and reserve the GOODTAKE sealer and polymer membrane for applications that match their stated uses. If your basement has active leaks or recurring water intrusion, assess the source and drainage before relying on any surface material alone.

Rate this post
Spread the love

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top