An indoor air conditioner cover can help limit drafts, dust, and cold air around a window unit when you are not using it. The right fit matters: a cover that is too small may leave gaps, while one that is too large may not seal well. These picks range from padded covers with adjustable fasteners to a two-piece design with a plastic liner. Measure your unit before choosing, and remove the cover before running the air conditioner.
| Product | Size or fit | Standout feature | Best for |
|---|---|---|---|
| BRIVIC Indoor Air Conditioner Cover | Inner size: 25 × 17 × 3.5 inches | Padded cover, adjustable straps, and a water-resistant inner lining | A snug fit for larger window units |
| BEWAVE Indoor Air Conditioner Cover | Listed size: 17 × 13 × 3.5 inches; other sizes are offered | Machine-washable 210D polyester and cotton construction | Shoppers who want a reusable cover with size options |
| Frost King 2-Piece Quilted Indoor Cover | 28 inches wide × 20 inches high | Separate plastic liner and machine-washable fabric cover | Draft control with a decorative outer layer |
| DEMEDO Indoor Air Conditioner Cover | Listed inner size: 17 × 13 × 3.5 inches; other sizes are offered | Hook-and-loop closure and a layered, coated construction | A close-fitting seal and flexible cord placement |
| CAT SO RICH Indoor Air Conditioner Cover | Four listed sizes, from 17 × 13 × 3.5 to 28 × 20 × 3.5 inches | Padded, washable cover with cord openings on both sides | Shoppers comparing several size options |
Table of Contents
Our Picks: Best Indoor Air Conditioner Cover reviews
BRIVIC Indoor AC Cover: A Padded Pick for Larger Window Units
The BRIVIC cover is made for the room-facing side of a window air conditioner. Its stated inner size is 25 × 17 × 3.5 inches, and the brand says it fits units measuring about 23 to 25 inches long, 15 to 17 inches high, and 3 inches deep. Measure the part of your unit the cover will surround rather than relying on its BTU rating alone.
Embedded cotton padding is intended to help limit drafts, while a water-resistant inner lining is designed to help keep humid air from reaching the unit. Adjustable side straps and elastic around the cover help you secure it. A hole at a bottom corner provides a route for the power cord.
This is a straightforward option if you want a padded cover with adjustable fastening and your unit is close to the listed dimensions. Its fixed size is less flexible than picks offered in several sizes. The product information does not specify that the cover is machine washable, so check the care instructions before cleaning it.
Pros:
- Cotton padding is designed to reduce drafts.
- Adjustable straps and elastic help create a snug fit.
- Water-resistant inner lining and a cord opening add practical details.
- No tools are required for installation.
Cons:
- One listed size may not fit units outside its stated measurements.
- Machine washing is not specified in the supplied product details.
Verdict: Choose the BRIVIC if your unit matches its measurements and you want a padded, adjustable cover with a water-resistant inner lining.
BEWAVE Indoor AC Cover: A Reusable Option with Size Choices
The BEWAVE cover is made from 210D polyester and cotton and is designed to cover the indoor face of a window unit. The listed size is 17 × 13 × 3.5 inches, while the product description says four sizes are available. Check the size menu on the listing and compare the selected option with your unit before ordering.
A drawstring tightens one side, and an extra drawstring is included to help with the fit. Two openings at the bottom corners let you route the power cord. The cover is described as machine washable and reusable, which is useful if you plan to put it on and take it off each cooling season.
Its combination of size options and washable fabric makes it a practical choice for shoppers who want a reusable cover. The product description also mentions outdoor weather protection, but this is an indoor cover; do not treat it as a substitute for a properly fitted exterior cover if you need to protect the outside of the unit.
Pros:
- Described as machine washable and reusable.
- Four size options are listed in the product description.
- Drawstrings help adjust the fit.
- Two cord openings offer more placement options.
Cons:
- The correct size depends on measuring your own unit.
- The drawstring closure may take more adjustment than a hook-and-loop design.
Verdict: The BEWAVE is a sensible option if you want a washable cover and can confirm which of its available sizes fits your unit.
Frost King Quilted Cover: A Two-Piece Design with a Plastic Liner
Frost King takes a different approach from the one-piece fabric covers. This large, two-piece set pairs a plastic liner with a quilted fabric cover. The liner is intended to stop drafts, while the outer cover provides a more finished look and helps keep out dust.
The fabric cover measures 28 inches wide by 20 inches high and is described as machine washable. Since the supplied product details do not list an adjustable closure or a depth measurement, check the product listing and compare the cover dimensions with the visible face of your unit before buying. A two-piece setup may also take a little more care to position than a single cover.
This pick is worth considering if you prefer a separate liner-and-cover arrangement rather than relying on one padded layer. It is less tailored in the details than covers with elastic, straps, or cord openings, so it may not be the easiest choice for an unusually shaped installation.
Pros:
- Two-piece design includes a plastic draft liner and fabric cover.
- Machine-washable fabric cover.
- Large stated dimensions suit shoppers comparing wider units.
- Fabric layer is designed to help keep out dust.
Cons:
- No adjustable fastening or cord opening is specified in the product details.
- Depth is not listed, so check fit details before ordering.
Verdict: Choose the Frost King if you want a two-piece setup and its 28-by-20-inch fabric cover matches the face of your unit.
DEMEDO Indoor AC Cover: A Close-Fitting Design with Cord Openings
The DEMEDO cover uses hook-and-loop tape to attach around the indoor side of a window air conditioner. The listed inner size is 17 × 13 × 3.5 inches, and the product description says other sizes are available for a range of window units. Confirm the size you select rather than assuming the listed dimensions apply to every version.
Its described layers include 600D Oxford cloth with a waterproof coating, insulation, and a sealed aluminum foil layer. The corners have closable openings for the power cord, and the description says all four corners can be used. That layout may help when your cord exits from a less common position.
Compared with a cover secured by a drawstring, hook-and-loop tape is intended to make it easier to seal the edges and keep the cover in place. The layered construction may be more involved than a simple fabric cover, and the product description does not mention machine washing. Follow the listing’s care guidance to avoid damaging the materials.
Pros:
- Hook-and-loop attachment is designed to seal around the unit.
- Multiple closable cord openings allow flexible cord placement.
- Layered construction is intended to block drafts and moisture.
- Several sizes are described as available.
Cons:
- You need to check which size is selected and confirm its measurements.
- Machine-washable care is not specified in the supplied details.
Verdict: The DEMEDO is a good fit for shoppers who value adjustable cord placement and a hook-and-loop closure, provided they choose the correct size.
CAT SO RICH Indoor AC Cover: Multiple Sizes and a Padded Build
The CAT SO RICH cover is described as a padded indoor cover for window units, with four listed sizes: 17 × 13 × 3.5, 21 × 15 × 3.5, 25 × 18 × 3.5, and 28 × 20 × 3.5 inches. It combines waterproof fabric with dense cotton padding and has elastic on both sides plus an adjustable fastener strap.
Velcro openings on both lower sides let you route the power cord from either side. The product description also says the cover is machine washable and reusable. These details make it a versatile design on paper, especially if cord position or unit size makes a single fixed-size option difficult.
The supplied product data lists this item as unavailable. Availability can change, so check the listing before planning a purchase. If it is not available, the BEWAVE also offers size options and a washable design, while the BRIVIC has adjustable straps for its stated size.
Pros:
- Four listed sizes cover a range of unit dimensions.
- Dense cotton padding is intended to help block cold air.
- Two cord openings allow left- or right-side routing.
- Described as machine washable and reusable.
Cons:
- The supplied product data lists it as unavailable.
- You still need to compare the selected size with your unit’s measurements.
Verdict: Consider the CAT SO RICH if it becomes available in the size you need; its multiple sizes and two cord openings are useful design features.
How to Choose an Indoor Air Conditioner Cover
Measure the part of the unit the cover will fit
Check the cover’s listed length, height, and depth, then measure the indoor portion of your air conditioner. Product dimensions may refer to the cover’s inner size, outer size, or fabric face, so read the listing carefully. Allow for the shape of the unit and any trim that could affect how the cover sits.
Choose a closure that suits your setup
Elastic and adjustable straps can help hold a cover in place, while drawstrings tighten the fabric around the unit. Hook-and-loop closures can offer a more customizable edge seal. A two-piece design may suit you if you want a separate plastic liner and decorative outer cover, but it has more parts to position.
Look for a cord opening in the right place
Check where the power cord exits your air conditioner and whether the cover has an opening on that side. Some designs provide openings at one or two lower corners, while others describe openings at all four corners. A cover that accommodates the cord without leaving a large gap can be easier to fit neatly.
Consider padding and material
Many covers in this group use cotton padding or layered material intended to limit drafts. Others use a separate plastic liner. Waterproof or water-resistant materials may help resist moisture, but an indoor cover is not a replacement for proper exterior protection. Choose a construction that fits your needs and follow the product’s care instructions.
Check how the cover should be cleaned
If you expect to reuse the cover each season, look for clear care instructions. The BEWAVE, Frost King, and CAT SO RICH product details describe washable covers. The supplied details for the BRIVIC and DEMEDO do not specify machine washing, so do not assume they can go in a washing machine.
Treat BTU guidance as a starting point, not a fit guarantee
A BTU range can help narrow your choices, but the physical measurements are more useful for confirming fit. Window units with similar cooling capacity can have different dimensions. Compare your measurements with the exact size option shown on the listing before you buy.
Frequently Asked Questions
Should an indoor air conditioner cover go on the inside or outside?
The covers in this guide are designed for the room-facing side of a window air conditioner. They can help limit indoor drafts and keep dust off the unit. An indoor cover does not replace an exterior cover when you need to protect the outside portion of the air conditioner.
Can I run the air conditioner while the cover is on?
No. Remove the cover before operating the unit. A cover is meant for times when the air conditioner is not in use, not for cooling while the unit is running.
How do I choose the right size?
Measure the indoor portion of your air conditioner and compare its length, height, and depth with the cover’s stated inner dimensions. If a listing offers several sizes, make sure you have selected the one that matches your measurements.
Will an indoor cover stop every draft?
No cover can be assumed to block every draft. Fit, the shape of the unit, and gaps around the window installation all matter. A properly fitted cover may help limit air movement, but it does not replace sealing gaps around the window.
Are these covers washable?
Washability depends on the product. The BEWAVE, Frost King, and CAT SO RICH descriptions identify their covers as machine washable. The supplied details for the BRIVIC and DEMEDO do not confirm machine washing, so check their care instructions before cleaning.
Do I need to remove the air conditioner to use an indoor cover?
The listed covers are designed to go over the indoor face of a window unit, so the supplied product details do not call for removing the air conditioner to install them. Make sure the cover fits around your particular unit and follow its installation instructions.
Final Recommendation
For a padded cover with adjustable straps and a water-resistant inner lining, the BRIVIC is a strong starting point if your unit matches its listed dimensions. The BEWAVE is worth comparing if you want a washable design with several size options, while the DEMEDO stands out for its hook-and-loop closure and flexible cord openings. Measure first, check the exact size selected, and remove any cover before operating your air conditioner.