A low-profile dual monitor wall mount can clear desk space while keeping two screens aligned, but “low profile” does not mean every mount sits equally close to the wall. Check your monitors’ size, weight, and VESA pattern, then consider how much tilt, swivel, and reach you need. These five options range from compact mounts for standard screens to a longer-arm choice for larger ultrawides.
Table of Contents
Quick Comparison
| Mount | Screen fit | Weight limit | Standout feature |
|---|---|---|---|
| PUTORSEN Dual Monitor Wall Mount | 13–27 inches | 22 lb per arm | Sliding alignment and broad tilt, swivel, and rotation |
| WALI Dual Monitor Wall Mount | 13–27 inches | 22 lb per arm | Curved arms; specified for concrete or brick walls |
| VIVO Premium Dual Ultrawide Wall Mount | 27–38 inches | 22 lb per arm | Telescoping arms for a flush wall setup |
| PUTORSEN Dual Gas Spring Wall Mount | 17–32 inches | 19.8 lb per arm | Gas-spring adjustment and shortened arm design |
| Putilsen Mount Dual Monitor Wall Mount | 13–27 inches | 22 lb per arm | Adapter design and sliding screen alignment |
Our Picks: Best Low Profile Dual Monitor Wall Mount reviews
1. PUTORSEN Dual Monitor Wall Mount: Best All-Around Fit for Standard Screens
This PUTORSEN mount is designed for two monitors between 13 and 27 inches, with a listed capacity of up to 22 pounds per arm. Its horizontal adapter arrangement is aimed at a side-by-side setup, and the sliding capability can help you line up the screens without relying on fixed spacing.
The mount offers tilt from +45 to -45 degrees, 30-degree swivel, and 360-degree rotation. Cable clips help keep cords together, while the wall-mounted layout leaves the desk clear beneath the displays. The supplied product information also describes the horizontal adapter as a way to turn a compatible single-monitor mount into a dual setup, so check the mounting arrangement and hole pattern carefully before buying.
Compared with the WALI, this model lists a wider swivel range. It is a practical option for standard-size screens when you want adjustability and a tidy desktop. The listed screen-size limit makes it a poor fit for larger ultrawides, and the product information does not specify a minimum wall gap.
Pros:
- Supports two monitors up to 27 inches and 22 pounds each
- Offers tilt, swivel, rotation, and sliding adjustment
- Includes cable-management clips
- Advertised with a lifetime warranty
Cons:
- Not designed for screens larger than 27 inches
- Confirm the wall-mount and VESA hole-pattern compatibility before ordering
Verdict: Choose this PUTORSEN if your monitors fit its size and weight limits and you want flexible positioning for a standard dual-screen setup.
2. WALI Dual Monitor Wall Mount: A Curved-Arm Option for Masonry Walls
The WALI is built for two 13- to 27-inch displays, each weighing up to 22 pounds. Its curved arm design gives the screens room to move, and the adjustable distance between the mounting plates is listed as 16 to 28.5 inches. This can help when you need to set the spacing for different monitor widths.
Its adjustment range includes +45 to -45 degrees of tilt, 15 degrees of swivel in either direction, and 180-degree rotation in either direction. The listing specifically says the mount can be installed on concrete or brick walls only. That limitation is important: it is not the right pick if you need a mount intended for wood-stud installation.
The WALI’s swivel range is more limited than the PUTORSEN standard-screen option, and the listing notes that wall mounting limits tilt and swivel. It includes cable management and hardware, but you should plan your screen position carefully before installation because the mount’s movement is constrained by its wall placement.
Pros:
- Fits two monitors up to 27 inches and 22 pounds each
- Adjustable spacing between the VESA plates
- Includes an integrated cable-management system
- Can adjust tilt and screen orientation
Cons:
- Specified for concrete or brick walls only
- Wall installation limits the available tilt and swivel movement
Verdict: Consider the WALI if you have a suitable masonry wall and want adjustable spacing for two standard-size screens, but skip it for wood-stud installations.
3. VIVO Premium Dual Ultrawide Wall Mount: Best for Larger Displays
Most mounts in this group top out at 27 or 32 inches, but this VIVO is made for two screens from 27 to 38 inches, including ultrawide displays. It supports up to 22 pounds per screen and fits VESA patterns of 75 by 75 mm or 100 by 100 mm. Its telescoping arms extend to accommodate larger monitors and slide together for a flush wall setup.
The mount offers up to 90 degrees of tilt in either direction, 180-degree swivel, and 360-degree rotation. Detachable VESA plates are intended to make attaching the screens easier, and the supplied hardware is specified for wood-stud installation. Cable clips are included to help route cords.
This is the strongest match for larger displays in the lineup, but its wider screen range does not mean it can carry any ultrawide: each monitor must still stay within the 22-pound limit and use a supported VESA pattern. For smaller screens, a more compact 13- to 27-inch mount may be a better fit. The product is backed by a three-year manufacturer warranty.
Pros:
- Supports screens up to 38 inches and 22 pounds each
- Telescoping arms are designed for a flush wall setup
- Offers extensive tilt, swivel, and rotation adjustment
- Includes detachable VESA plates and wood-stud hardware
Cons:
- Not intended for monitors below 27 inches
- Each monitor must meet the listed weight and VESA limits
Verdict: Pick the VIVO if you need a wall mount for two large or ultrawide screens and its weight, VESA, and installation requirements match your setup.
4. PUTORSEN Dual Gas Spring Wall Mount: Short Reach for 17- to 32-Inch Screens
This PUTORSEN mount is designed for two flat or curved screens from 17 to 32 inches, with a maximum listed weight of 19.8 pounds per screen. Its gas-spring arms are intended to make height changes smoother, and a center pole provides 11.02 inches of height adjustment.
The shortened-arm design is the main low-profile feature: the listing gives a minimum gap of 3.85 inches from the wall and a maximum extension of 20.9 inches. It also offers tilt from +45 to -45 degrees, 180-degree swivel, and 360-degree rotation. The mount is specified for concrete, brick, and wooden walls, with cable management built in.
This model gives you more height adjustment than the simpler horizontal mounts, but it has a lower weight limit per arm than the other options here. Check the complete weight of each monitor, not only its screen size, before choosing it. The product information specifies VESA patterns of 75 by 75 mm and 100 by 100 mm.
Pros:
- Fits two 17- to 32-inch flat or curved monitors
- Gas springs and a center pole provide height adjustment
- Lists a 3.85-inch minimum wall gap
- Specified for wood, brick, and concrete walls
Cons:
- Lower capacity of 19.8 pounds per arm
- Its minimum wall gap is not fully flush
Verdict: Choose this PUTORSEN for adjustable positioning and a shorter reach with mid-size screens, provided each monitor stays within its lower weight limit.
5. Putilsen Mount Dual Monitor Wall Mount: An Adapter-Focused Choice
This mount is designed for two monitors from 13 to 27 inches, with a listed capacity of up to 22 pounds per arm. Its horizontal adapter plate is meant to convert a compatible single-monitor arm into a dual-screen arrangement. That makes it a different kind of option from a straightforward dual mount, so check that your existing arm and its hole pattern are compatible before ordering.
The product description highlights a slim wall plate and a sliding system that lets you adjust each monitor’s position along the horizontal bar. It also has detachable VESA plates, cable clips, and hardware listed for wood studs, brick, or solid concrete. The arms provide +45 to -45 degrees of tilt, 30 degrees of swivel, and 360-degree rotation.
Its adapter design could make sense if you already have a compatible single-monitor setup to expand. However, the description’s compatibility details refer to an existing arm with a 75 by 100 mm hole pattern, so confirm what the kit includes and whether it matches your intended installation. If you want a dedicated dual mount with a clearer fit for larger displays, the VIVO or gas-spring PUTORSEN is a better starting point.
Pros:
- Supports two screens up to 27 inches and 22 pounds each
- Sliding system allows horizontal alignment adjustments
- Detachable VESA plates and cable-management clips are included
- Specified for wood, brick, and solid concrete walls
Cons:
- Adapter use depends on compatibility with an existing single-monitor arm
- Does not support screens larger than 27 inches
Verdict: Consider this option if you specifically want its adapter approach and have verified that your existing arm and mounting pattern are compatible.
How to Choose a Low Profile Dual Monitor Wall Mount
Measure Screen Size and Weight
Check the mount’s supported screen-size range and its weight limit for each arm. A screen can fit within the stated size range but still exceed the arm’s capacity, especially if it is a larger or heavier model. Leave room below the maximum rather than assuming the size rating alone guarantees a fit.
Confirm the VESA Pattern
VESA is the square hole pattern on the back of a monitor. Common patterns in these listings include 75 by 75 mm and 100 by 100 mm. Check your monitor’s manual or measure the distance between the mounting holes. Adapter-style mounts need an extra check: confirm that your existing arm or plate has the exact pattern the adapter requires.
Check Wall Type and Installation Hardware
Wall compatibility varies. The WALI listing specifies concrete or brick walls only, while the VIVO includes hardware for wood-stud installation. Other options in this group list compatibility with wood, brick, or concrete. Match the mount’s instructions to your wall material and use appropriate structural support; do not assume every included fastener works for every wall.
Consider How Close the Screens Sit to the Wall
A wall mount can free desk space, but arm shape and monitor size affect how close the screens can sit. The gas-spring PUTORSEN lists a minimum gap of 3.85 inches, while the VIVO describes telescoping arms for a flush setup. If a specific wall gap matters, look for a stated measurement and account for the depth of your monitors and their cables.
Choose the Movement You Actually Need
More articulation can help you adjust screens for glare, posture, or portrait orientation, but it may not be useful if your monitors will stay in one position. Compare tilt and swivel ranges, and remember that wall placement can limit movement. Gas-spring arms can be useful when you plan to adjust height often; a simpler horizontal mount may be enough for a fixed side-by-side setup.
Plan Screen Spacing and Cable Routing
Measure the combined width of both monitors and the space available on the wall. Look for adjustable plate spacing or a sliding alignment system if you want to fine-tune the gap between screens. Cable clips help organize cords, but you should also leave enough slack for any movement you expect to use.
Frequently Asked Questions
What does “low profile” mean for a dual monitor wall mount?
It generally refers to a setup intended to keep screens or arms close to the wall, but the term does not set a standard wall gap. Compare stated measurements where available, and remember that screen depth, cables, and arm position affect the final distance.
How do I know whether a mount fits my monitors?
Check each monitor’s screen size, total weight, and VESA mounting-hole pattern. All three must fall within the mount’s listed limits. For an adapter mount, also verify compatibility with the arm or bracket it is meant to connect to.
Can I install any of these mounts on drywall?
The supplied product information does not identify drywall by itself as a supported mounting surface. Check the manufacturer’s instructions and mount to appropriate structural support. The WALI listing specifically limits its installation to concrete or brick walls.
Are gas-spring arms better than fixed or mechanical arms?
They can be more convenient if you regularly change screen height or position. If your monitors will stay in one place, a simpler mount may suit your needs. Compare the adjustment range and weight limits rather than choosing by arm type alone.
Will two monitors always sit flush side by side?
No. Screen size, bezel width, VESA position, arm spacing, and wall clearance all affect alignment. Sliding plates or adjustable spacing can help, but measure your screens and check the mount’s adjustment range before buying.
Which option is best for ultrawide monitors?
The VIVO Premium Dual Ultrawide Wall Mount is the only option in this group listed for screens up to 38 inches. Confirm that each ultrawide weighs no more than 22 pounds and uses a supported VESA pattern.
Final Recommendation
For a typical dual setup with screens up to 27 inches, the PUTORSEN Dual Monitor Wall Mount offers a useful mix of adjustment and cable management. Choose the VIVO for larger ultrawides, the gas-spring PUTORSEN if you want height adjustment and a stated minimum wall gap, or the WALI when you have a suitable masonry wall. If you are considering the Putilsen adapter, verify compatibility with your existing arm before making a decision.
