Product reviewHeating & Cooling

Best Hardwood Floor Refinishing Products: Polishes and Restorers Compared

Updated 10 min read

Reader-supported: when you buy through links on our site, we may earn an affiliate commission at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases. Learn more.

Hardwood floor “refinishing” products can refresh a worn-looking surface without sanding, but they are not a substitute for a full refinish when the finish is badly damaged. The options below are polishes and restorers designed to renew appearance, add a protective layer, or fill in minor surface scratches. The right choice depends on your floor’s finish and whether you prefer a glossy or more subtle sheen.

Quick Comparison

ProductFinishBest ForNotable Detail
Bona Hardwood Floor PolishHigh glossAdding a shiny finishListed coverage is about 500 square feet per 32-ounce bottle
Rejuvenate Professional Wood Floor RestorerSatinA softer sheen in a smaller bottleOne-coat application
Quick Shine Hardwood Floor LusterNatural-looking shinePlant-derived formula preferencesCarnauba polish with slip-resistant technology
Rejuvenate Professional Wood Floor Restorer, 1 GallonGlossGlossy finish for a larger projectOne-coat application
Bona Hardwood Floor Polish, Low GlossLow glossA more understated lookAbout 500 square feet of coverage per bottle

Our Picks: Best Hardwood Floor Refinishing Products reviews

1. Bona Hardwood Floor Polish for a High-Gloss Finish

Bona Hardwood Floor Polish is made for unwaxed, unoiled wood floors with a polyurethane finish. It is intended to renew a dull-looking surface, add a high-gloss shine, and leave a protective layer that fills in micro-scratches. It is polish, not a floor cleaner, so the floor needs to be clean before application.

The 32-ounce size is listed as covering about 500 square feet. Bona recommends applying it with its dedicated microfiber cleaning pad for polish. That makes this a practical pick if you want a glossy look and are willing to use an application pad rather than treating the bottle as a cleaner-and-polish combination.

Its finish is the main trade-off. High gloss can make a floor look brighter, but it is not the best match if you prefer a low-sheen, natural appearance. Like other surface polishes, it can improve the look of minor scratches, but it will not repair deep gouges or replace sanding and refinishing when the finish is seriously worn.

Pros:

  • High-gloss finish for dull polyurethane-finished floors
  • Helps fill in micro-scratches and even out the floor’s appearance
  • Listed coverage of about 500 square feet per 32-ounce bottle
  • Certified to GREENGUARD standards for low chemical emissions during use

Cons:

  • Not a floor cleaner; the surface must be cleaned separately
  • Not intended for unwaxed or unoiled floors with other finish types

Verdict: Choose Bona High Gloss if your polyurethane-finished floor needs a cosmetic refresh and you want a noticeable shine.

2. Rejuvenate Professional Wood Floor Restorer with Satin Finish

This Rejuvenate restorer is designed to refresh wood floors with a matte satin finish. Its one-coat application is intended to fill in scratches, add shine, and protect the surface. The satin sheen sits between a very subdued finish and a more reflective gloss, making it a useful middle ground if you do not want a strong shine.

The 32-ounce bottle is a smaller format than the gallon-size Rejuvenate option in this list. That can make it a better fit for a modest area or for shoppers who do not need a larger container. For best results, the product maker recommends using it with Rejuvenate Wood Floor Cleaner. Follow the label directions, including its use and safety guidance.

The product is described as safe for pets and kids when used according to its directions. That does not mean the floor should be used before the product has been applied and handled as instructed. As with any restorer, it is meant to improve the surface appearance, not fix deep damage or a failing floor finish.

Pros:

  • Satin finish offers a softer look than a glossy restorer
  • One-coat application is designed to fill scratches, shine, and protect
  • Smaller bottle size suits more limited projects
  • Can be paired with Rejuvenate Wood Floor Cleaner

Cons:

  • Coverage information is not provided in the supplied product details
  • For best results, the maker recommends a separate cleaner

Verdict: Pick the satin Rejuvenate restorer if you want a single-coat refresh with a less glossy finish and do not need a gallon-size container.

3. Quick Shine Hardwood Floor Luster with Carnauba Polish

Quick Shine Hardwood Floor Luster is a ready-to-use polish made with plant-derived carnauba. The product is designed to renew the floor’s appearance, add a protective layer, and fill in micro-scratches. Its natural-looking shine is a useful alternative to products marketed specifically for a high-gloss result.

The formula is described as pH neutral and free from several listed ingredients, including ammonia, formaldehyde, fragrance, and phthalates. It is recognized by the EPA Safer Choice Program, and the product also features UL Certified Slip-Resistant technology. These details may matter if you are comparing formulas, though you should still follow the label and keep the floor clear during application and drying as directed.

Quick Shine claims its formula is for all hardwood floor finishes, a broader stated fit than the Bona polishes, which specify polyurethane-finished floors. Even so, checking the product label and testing an inconspicuous area first is a sensible way to confirm the result on your particular floor. The supplied details do not give a coverage figure, so estimating how much you need may take an extra check.

Pros:

  • Plant-derived carnauba polish with a natural-looking shine
  • Ready to use on clean, dry floors
  • Recognized by the EPA Safer Choice Program
  • Features UL Certified Slip-Resistant technology

Cons:

  • Coverage per bottle is not stated in the supplied details
  • Not a substitute for a dedicated floor cleaner or repairs to deep damage

Verdict: Quick Shine is a strong option if you want a ready-to-use, carnauba-based polish with a natural-looking finish and a broad stated compatibility claim.

4. Rejuvenate Professional Wood Floor Restorer in a Gallon Size

This gallon-size Rejuvenate restorer has the same stated one-coat approach as the smaller satin option, but it leaves a glossy finish. The formula is designed to fill in scratches, add shine, and protect wood floors. The larger container is worth considering when you have a bigger area to treat or want more product on hand.

Rejuvenate recommends using its Wood Floor Cleaner first for best results. That separation is important: a restorer is for refreshing the surface, not removing dirt and residue. Prepare the floor as directed on the labels, and check that the glossy finish suits your room before applying it across a large area.

The product description does not provide a coverage figure, so do not assume the gallon will cover a specific number of square feet. It is also not a repair coating for deep scratches, worn-through finish, or other damage that calls for sanding or professional refinishing. Compared with the smaller satin restorer, this is the better match when you prefer gloss and need a larger format.

Pros:

  • Gallon-size format for larger projects
  • Gloss finish for a brighter, more reflective look
  • One-coat application is designed to fill scratches, shine, and protect
  • Can be used with Rejuvenate Wood Floor Cleaner as part of floor care

Cons:

  • Coverage per container is not stated in the supplied details
  • Gloss may not suit shoppers who want a low-sheen appearance

Verdict: Choose the gallon-size Rejuvenate if you have a larger area to refresh and want its glossy one-coat finish.

5. Bona Hardwood Floor Polish for a Low-Gloss Look

Bona Low Gloss Polish is made for polyurethane-finished hardwood floors and leaves a subtle, matte-like protective layer. Its water-based urethane-acrylic formula is designed to defend against everyday wear, scuffs, and scratches while filling in micro-scratches and evening out the surface appearance.

The bottle is listed as covering about 500 square feet, and Bona recommends using a dedicated microfiber pad for application. Like the high-gloss Bona polish, this is a polish rather than a cleaner. Make sure the floor is clean and follow the directions so the new layer has an even surface to work with.

The low-gloss finish is the key difference between this and Bona’s high-gloss option. It suits floors where you want a refreshed appearance without adding a strong shine. The product is specifically designed for polyurethane-finished hardwood, so it is not the right choice if your floor is waxed, oiled, or has another finish type.

Pros:

  • Low-gloss finish maintains a more understated look
  • Water-based urethane-acrylic coating helps protect against everyday wear
  • Designed to fill micro-scratches and even out the floor’s appearance
  • Listed coverage of about 500 square feet per bottle

Cons:

  • Not a floor cleaner, so separate cleaning is needed
  • Made for polyurethane-finished hardwood, not every floor finish

Verdict: Bona Low Gloss is the better Bona choice if you want surface protection and a refreshed look without a high-shine finish.

How to Choose a Hardwood Floor Refinishing Product

Know whether you need polish or a full refinish

Polishes and restorers are designed to refresh the floor’s appearance and add a surface layer. They can help with dullness and minor surface scratches, but they do not replace sanding or repair deep gouges, peeling finish, or damage that reaches into the wood. If the finish is badly worn, a surface product may not give you the result you want.

Match the product to your floor’s finish

Compatibility matters. Bona’s two polishes are described for unwaxed, unoiled, polyurethane-finished wood floors. Quick Shine states that it is suitable for all hardwood floor finishes. Rejuvenate’s supplied descriptions do not give the same specific finish details, so check its product label before applying it. If you are unsure what finish your floor has, test a small, hidden area first.

Choose the sheen you want to see every day

High-gloss and gloss products create a more reflective appearance, while satin and low-gloss options are more subdued. Quick Shine is described as offering a natural-looking shine. Consider the look of your existing floor and the light in the room, and avoid choosing based only on the word “shine.” A small test area can help you judge the finish before treating the whole floor.

Check the application and cleaning steps

Some products require a separate cleaner before application. Bona explicitly says its polish is not a floor cleaner, and Rejuvenate recommends using its Wood Floor Cleaner for best results. Quick Shine calls for application to clean, dry floors. Read the label for preparation, application, and drying instructions, and use the recommended pad or tool where specified.

Estimate how much product you need

Bona lists coverage of about 500 square feet for each 32-ounce bottle in these options. The supplied details for Quick Shine and both Rejuvenate products do not state coverage, so check the label or product listing before deciding how many containers to buy. A gallon-size package may suit a larger project, but its coverage should not be guessed.

Consider the formula details that matter to you

Quick Shine highlights plant-derived carnauba, a pH-neutral formula, EPA Safer Choice recognition, and UL Certified Slip-Resistant technology. Bona’s high-gloss polish is certified to GREENGUARD standards for low chemical emissions during use. These claims can help narrow your choices, but they do not remove the need to follow the product directions and use the product only as intended.

Frequently Asked Questions

Do these products truly refinish hardwood floors?

They are surface polishes and restorers, not sanding-and-refinishing systems. They are intended to improve the appearance of dull floors and add a protective layer. They cannot repair deep damage or replace a full refinish when the wood finish is badly worn.

Should I clean the floor before applying polish?

Yes. Bona states that its polish is not a cleaner, and Quick Shine specifies a clean, dry floor. Rejuvenate recommends using its Wood Floor Cleaner for best results. Follow the preparation steps on the product label.

Which product gives the least glossy finish?

Bona Low Gloss is described as leaving a subtle, matte-like finish. Rejuvenate’s satin restorer is another option if you want a sheen between matte and gloss.

Can I use Bona polish on an oiled or waxed floor?

Bona’s supplied product details specify unwaxed, unoiled, polyurethane-finished wood floors. Do not assume it is suitable for an oiled or waxed floor. Check the product label and the floor-care instructions for your surface.

Which option is best for a larger project?

The gallon-size Rejuvenate restorer is the largest package in this selection. Bona lists about 500 square feet of coverage for its 32-ounce bottles. Check the label for exact coverage and application directions before buying enough for a project.

Will polish remove deep scratches?

No. These products are designed to fill in or improve the appearance of micro-scratches and minor surface wear. Deep scratches, gouges, and damaged finish may need repair or professional refinishing.

Final Recommendation

For most shoppers, the best choice comes down to finish and sheen. Choose Bona Low Gloss for a subtle look on polyurethane-finished floors, or Bona High Gloss if you want a more reflective finish and clearly listed coverage. Quick Shine stands out for its carnauba-based formula and natural-looking shine, while Rejuvenate offers satin and gloss options in two container sizes. Before applying any of them, confirm compatibility, clean the floor as directed, and test a small area.

Rate this post
Spread the love

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top